# Ignition **URL:** https://forum.inductiveautomation.com/c/ignition/6.md?no_subcategories=false&page=898 [Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md) **Page:** 899 --- ## [Add a delay before transaction group read](https://forum.inductiveautomation.com/t/add-a-delay-before-transaction-group-read/18485)
**Author:** [@Psiuyo](https://forum.inductiveautomation.com/u/Psiuyo)\ **Replies:** 2\ **Last updated:** [January 31, 2022, 4:03am UTC](https://forum.inductiveautomation.com/t/add-a-delay-before-transaction-group-read/18485 "2022-01-31T04:03:22Z")
We are using a transaction group with a single tag as a trigger, this data doesn't change very often - only a couple times an hour. The problem we have is that the PLC can take up to 10 seconds to populate all the tags … --- ## [Perspective display live video](https://forum.inductiveautomation.com/t/perspective-display-live-video/54619)
**Author:** [@josborn](https://forum.inductiveautomation.com/u/josborn)\ **Replies:** 1\ **Last updated:** [January 31, 2022, 1:27am UTC](https://forum.inductiveautomation.com/t/perspective-display-live-video/54619 "2022-01-31T01:27:25Z")
I am attempting to display a video stream from an IP camera in perspective. With some of the posts here i was able to re-stream the rtsp stream as HTTP which works, but only on the client computer using http://127.0.0.1.… --- ## [Popup open in multiple window](https://forum.inductiveautomation.com/t/popup-open-in-multiple-window/55528)
**Author:** [@sammyjoe.gingras](https://forum.inductiveautomation.com/u/sammyjoe.gingras)\ **Replies:** 2\ **Last updated:** [January 30, 2022, 1:11pm UTC](https://forum.inductiveautomation.com/t/popup-open-in-multiple-window/55528 "2022-01-30T13:11:25Z")
HI, I’m trying to figure out a way to open the same popup in every window of the project at the same time. The popup open when a certain property of a tag is=1, so actually the popup only open in this specific page. I w… --- ## [system.tag.queryTagHistory() return sql.Timestamp, Why?](https://forum.inductiveautomation.com/t/system-tag-querytaghistory-return-sql-timestamp-why/55520)
**Author:** [@jespinmartin1](https://forum.inductiveautomation.com/u/jespinmartin1)\ **Replies:** 1\ **Last updated:** [January 29, 2022, 2:31pm UTC](https://forum.inductiveautomation.com/t/system-tag-querytaghistory-return-sql-timestamp-why/55520 "2022-01-29T14:31:39Z")
I’m confuse about this. The column ‘t\_stamp’ type, return by system.tag.queryTagHistory() , is class of java.sql.Timestamp but only sometimes, most of times it’s java.util.Date type. What is going on? --- ## [Tag Security Updates](https://forum.inductiveautomation.com/t/tag-security-updates/55514)
**Author:** [@bwirth](https://forum.inductiveautomation.com/u/bwirth)\ **Replies:** 1\ **Last updated:** [January 29, 2022, 1:33am UTC](https://forum.inductiveautomation.com/t/tag-security-updates/55514 "2022-01-29T01:33:12Z")
I’m looking to recover from an oversight where I configured write permissions on a tag for several groups but I neglected to check the “AnyOf” radio button and left at the default of ‘AllOf’. I would like to do this via… --- ## [system.tag.storeTagHistory() unable to retrieve while not in ascendant order?](https://forum.inductiveautomation.com/t/system-tag-storetaghistory-unable-to-retrieve-while-not-in-ascendant-order/55513)
**Author:** [@jespinmartin1](https://forum.inductiveautomation.com/u/jespinmartin1)\ **Replies:** 0\ **Last updated:** [January 29, 2022, 1:01am UTC](https://forum.inductiveautomation.com/t/system-tag-storetaghistory-unable-to-retrieve-while-not-in-ascendant-order/55513 "2022-01-29T01:01:13Z")
I noticed that when using system.tag.storeTagHistory() and timestamps has no Ascendant order (all same tag), data does store in DB but the historian is unable to retrieve the data. Can anybody confirm this behavior? S… --- ## [Native Client Launcher Desktop Icon](https://forum.inductiveautomation.com/t/native-client-launcher-desktop-icon/55486)
**Author:** [@cmaynes](https://forum.inductiveautomation.com/u/cmaynes)\ **Replies:** 9\ **Last updated:** [January 28, 2022, 11:45pm UTC](https://forum.inductiveautomation.com/t/native-client-launcher-desktop-icon/55486 "2022-01-28T23:45:48Z")
OS: Windows 10 Ignition: 7.9.17 Java: Oracle 1.8 After switching from JNLPs to the native client launcher, it no longer seems possible to set the desktop icon through the project properties. The icons are important f… --- ## [Skip Dates - Report Module Bar Chart Domain](https://forum.inductiveautomation.com/t/skip-dates-report-module-bar-chart-domain/35885)
**Author:** [@mo.maloney](https://forum.inductiveautomation.com/u/mo.maloney)\ **Replies:** 1\ **Last updated:** [January 28, 2022, 10:46pm UTC](https://forum.inductiveautomation.com/t/skip-dates-report-module-bar-chart-domain/35885 "2022-01-28T22:46:46Z")
I’m working on a bar chart in the reporting module for a daily report that gets emailed via a schedule. The problem is, when showing a few months of data, the domain (x-axis) gets extremely crowded. The user is requestin… --- ## [Get Project Edit History in Gateway Script](https://forum.inductiveautomation.com/t/get-project-edit-history-in-gateway-script/55497)
**Author:** [@dustin.cooper](https://forum.inductiveautomation.com/u/dustin.cooper)\ **Replies:** 10\ **Last updated:** [January 28, 2022, 10:19pm UTC](https://forum.inductiveautomation.com/t/get-project-edit-history-in-gateway-script/55497 "2022-01-28T22:19:20Z")
This feels like it ought to be a fairly trivial task, but has proven to be more difficult than I thought. I’m able to get an array of RuntimeProject from IgnitionGateway.get().getProjectManager() context. But none of th… --- ## [Mutli Project and/or Multi Gateway Menu Tree Navigation in Perspective](https://forum.inductiveautomation.com/t/mutli-project-and-or-multi-gateway-menu-tree-navigation-in-perspective/55493)
**Author:** [@Andrew\_Cluts](https://forum.inductiveautomation.com/u/Andrew_Cluts)\ **Replies:** 2\ **Last updated:** [January 28, 2022, 7:45pm UTC](https://forum.inductiveautomation.com/t/mutli-project-and-or-multi-gateway-menu-tree-navigation-in-perspective/55493 "2022-01-28T19:45:59Z")
I want/need to find a way to navigate to other projects, and in the near future, projects on other Gateways. My layout right now is like the “Gateway A” below and soon to be joined with “Gateway B” Each gateway repre… --- ## [Perspective - Scripting - Runing scripts](https://forum.inductiveautomation.com/t/perspective-scripting-runing-scripts/47599)
**Author:** [@luc.martin](https://forum.inductiveautomation.com/u/luc.martin)\ **Replies:** 4\ **Last updated:** [December 7, 2021, 11:48pm UTC](https://forum.inductiveautomation.com/t/perspective-scripting-runing-scripts/47599 "2021-12-07T23:48:50Z")
8.1.5 Is there a way to valid if a srcipt is currently running ? --- ## [\[BUG\] Hex Color Gradient Stop Points](https://forum.inductiveautomation.com/t/bug-hex-color-gradient-stop-points/55403)
**Author:** [@amarks](https://forum.inductiveautomation.com/u/amarks)\ **Replies:** 3\ **Last updated:** [January 28, 2022, 6:11pm UTC](https://forum.inductiveautomation.com/t/bug-hex-color-gradient-stop-points/55403 "2022-01-28T18:11:26Z")
Editing a gradient for a shape and I have found that I cannot edit the hex color value in the color picker directly. The hex value does update as I change the color on the wheel, select a new color on the palette, or cha… --- ## [system.net.httpClient().request() is doing some uncommanded encoding on my binary data](https://forum.inductiveautomation.com/t/system-net-httpclient-request-is-doing-some-uncommanded-encoding-on-my-binary-data/45003)
**Author:** [@mmunin](https://forum.inductiveautomation.com/u/mmunin)\ **Replies:** 13\ **Last updated:** [January 28, 2022, 5:17pm UTC](https://forum.inductiveautomation.com/t/system-net-httpclient-request-is-doing-some-uncommanded-encoding-on-my-binary-data/45003 "2022-01-28T17:17:40Z")
I would like to have my Vision client user select a file, and then use system.net.httpClient() to POST the contents of that file via HTTP. According to the documentation, the following should work. h = system.net.httpC… --- ## [Export report to csv with Trend inside](https://forum.inductiveautomation.com/t/export-report-to-csv-with-trend-inside/55482)
**Author:** [@y.parashchuk](https://forum.inductiveautomation.com/u/y.parashchuk)\ **Replies:** 3\ **Last updated:** [January 28, 2022, 4:53pm UTC](https://forum.inductiveautomation.com/t/export-report-to-csv-with-trend-inside/55482 "2022-01-28T16:53:15Z")
Is there any way to export report as csv file and not to lose trend in it? I am using system.report.executeReport(path=“Report\_Path”, project=“project\_Name”, parameters=Parameters, fileType=“csv”) → all works fine if … --- ## [Siemens Data Block addressing not working](https://forum.inductiveautomation.com/t/siemens-data-block-addressing-not-working/55458)
**Author:** [@imt.sebastian.sanche](https://forum.inductiveautomation.com/u/imt.sebastian.sanche)\ **Replies:** 6\ **Last updated:** [January 28, 2022, 4:50pm UTC](https://forum.inductiveautomation.com/t/siemens-data-block-addressing-not-working/55458 "2022-01-28T16:50:20Z")
Hello, I got a 1500 Siemens PLC accesible through Ignition but I can’t acces DB824. I tried to access the standard controller tags and no problem but when I try to go to the DB it always give me a “Bad” connection. Alrea… --- ## [7.9.5 High Cpu Usage](https://forum.inductiveautomation.com/t/7-9-5-high-cpu-usage/55489)
**Author:** [@RonB](https://forum.inductiveautomation.com/u/RonB)\ **Replies:** 3\ **Last updated:** [January 28, 2022, 4:48pm UTC](https://forum.inductiveautomation.com/t/7-9-5-high-cpu-usage/55489 "2022-01-28T16:48:58Z")
Usage was staying between 80-99%, which began two days ago. Nothing has been changed (that I’m aware of since December). So far, in the forum I found where it may be helpful to add a line to the Garbage Collector adding… --- ## [Geolocation Permission Request](https://forum.inductiveautomation.com/t/geolocation-permission-request/55454)
**Author:** [@jacob.ramirez](https://forum.inductiveautomation.com/u/jacob.ramirez)\ **Replies:** 7\ **Last updated:** [January 28, 2022, 2:31pm UTC](https://forum.inductiveautomation.com/t/geolocation-permission-request/55454 "2022-01-28T14:31:28Z")
Is there a way to request geolocation permission from Perspective? --- ## [Get AD Group users?](https://forum.inductiveautomation.com/t/get-ad-group-users/51893)
**Author:** [@iceberg](https://forum.inductiveautomation.com/u/iceberg)\ **Replies:** 8\ **Last updated:** [January 28, 2022, 12:56pm UTC](https://forum.inductiveautomation.com/t/get-ad-group-users/51893 "2022-01-28T12:56:45Z")
Does anyone know how to get a list of users in an AD group within ignition? It seems like this should be possible, but I can’t find a built in function that does this. My user source is a full active directory setup. --- ## [Dynamic Table for Reports](https://forum.inductiveautomation.com/t/dynamic-table-for-reports/55469)
**Author:** [@Sergei\_Kitov](https://forum.inductiveautomation.com/u/Sergei_Kitov)\ **Replies:** 1\ **Last updated:** [January 28, 2022, 12:44pm UTC](https://forum.inductiveautomation.com/t/dynamic-table-for-reports/55469 "2022-01-28T12:44:15Z")
Hello all! I want to create a report that would show the number of faults over a certain period of time. I ran into the problem that in -Reporting Module- it is impossible to explicitly create a dynamic table. For examp… --- ## [Change Date alignment to vertical in charts](https://forum.inductiveautomation.com/t/change-date-alignment-to-vertical-in-charts/55474)
**Author:** [@user95](https://forum.inductiveautomation.com/u/user95)\ **Replies:** 2\ **Last updated:** [January 28, 2022, 12:03pm UTC](https://forum.inductiveautomation.com/t/change-date-alignment-to-vertical-in-charts/55474 "2022-01-28T12:03:42Z")
How to change Date alignment in vertical in xy charts. In the picture xy chart, in x series time displaying in horizontally, how to make the format vertically display. --- ## [Power chart table is not responsive. bug?](https://forum.inductiveautomation.com/t/power-chart-table-is-not-responsive-bug/55473)
**Author:** [@lachguerabdallah](https://forum.inductiveautomation.com/u/lachguerabdallah)\ **Replies:** 0\ **Last updated:** [January 28, 2022, 9:23am UTC](https://forum.inductiveautomation.com/t/power-chart-table-is-not-responsive-bug/55473 "2022-01-28T09:23:54Z")
the power chart table does not look good in android. you have to drag to control the tags´ on iphone does not have this issue. thanks you --- ## [Page Configuration: URL ordering](https://forum.inductiveautomation.com/t/page-configuration-url-ordering/55452)
**Author:** [@gdube](https://forum.inductiveautomation.com/u/gdube)\ **Replies:** 3\ **Last updated:** [January 28, 2022, 8:45am UTC](https://forum.inductiveautomation.com/t/page-configuration-url-ordering/55452 "2022-01-28T08:45:44Z")
Hi guys, Would it be possible to have a way to re-order URLs in Page Configuration, or perhaps automatically put URLs with parameters after URLs without parameters? For cases such as: /url/:parameter /url/page In tho… --- ## [no viable alternative at input '"....](https://forum.inductiveautomation.com/t/no-viable-alternative-at-input/55397)
**Author:** [@Rea\_Berberi](https://forum.inductiveautomation.com/u/Rea_Berberi)\ **Replies:** 6\ **Last updated:** [January 28, 2022, 6:22am UTC](https://forum.inductiveautomation.com/t/no-viable-alternative-at-input/55397 "2022-01-28T06:22:10Z")
SyntaxError: no viable alternative at input ‘"{genPath}/{dataTag\[0\]\[‘name’\]}"’ (, line 98) Code: \`import json filePath = 'E:\\\\tags.json' tagPaths = \["\[default\]"\] recursive = True system.tag.exportTags(filePa… --- ## [Omron NJ PLC Driver in Trial Mode](https://forum.inductiveautomation.com/t/omron-nj-plc-driver-in-trial-mode/55451)
**Author:** [@Curlyandshemp](https://forum.inductiveautomation.com/u/Curlyandshemp)\ **Replies:** 4\ **Last updated:** [January 27, 2022, 10:31pm UTC](https://forum.inductiveautomation.com/t/omron-nj-plc-driver-in-trial-mode/55451 "2022-01-27T22:31:00Z")
I have an application where I am connecting to my very first Omron NX1P2-9024DT1 PLC. I want to test the OMRON NJ driver in trial mode before committing to the customer a license upgrade purchase for the module. I have… --- ## [Launch Staging with Zulu JRE](https://forum.inductiveautomation.com/t/launch-staging-with-zulu-jre/30805)
**Author:** [@Jonathan](https://forum.inductiveautomation.com/u/Jonathan)\ **Replies:** 10\ **Last updated:** [January 27, 2022, 7:42pm UTC](https://forum.inductiveautomation.com/t/launch-staging-with-zulu-jre/30805 "2022-01-27T19:42:29Z")
Is there a way to launch the staging version of a project using Zulu JRE? --- ## [Overlaying an existing XY Chart over Realtime Data Chart?](https://forum.inductiveautomation.com/t/overlaying-an-existing-xy-chart-over-realtime-data-chart/55149)
**Author:** [@Nick\_Dacek](https://forum.inductiveautomation.com/u/Nick_Dacek)\ **Replies:** 3\ **Last updated:** [January 27, 2022, 7:16pm UTC](https://forum.inductiveautomation.com/t/overlaying-an-existing-xy-chart-over-realtime-data-chart/55149 "2022-01-27T19:16:59Z")
Ok guys. I’m going to ask if this is even possible/has anyone done it before going down the rabbit hole of trying… I’m controlling the ramp/soak times of an oven. I’ve created a screen where I can punch in the temp and… --- ## [Blinking Table's cell](https://forum.inductiveautomation.com/t/blinking-tables-cell/20937)
**Author:** [@c.bertulli](https://forum.inductiveautomation.com/u/c.bertulli)\ **Replies:** 6\ **Last updated:** [January 27, 2022, 4:35pm UTC](https://forum.inductiveautomation.com/t/blinking-tables-cell/20937 "2022-01-27T16:35:45Z")
Hi All, I was wondering if there is a way to make a specific Power Table's cell blink from let's say.. yellow to red with a blink time of 1 second. Thanks in advance. Cheers, --- ## [Check if Client is Staging or Published in Script](https://forum.inductiveautomation.com/t/check-if-client-is-staging-or-published-in-script/55441)
**Author:** [@cmaynes](https://forum.inductiveautomation.com/u/cmaynes)\ **Replies:** 2\ **Last updated:** [January 27, 2022, 4:34pm UTC](https://forum.inductiveautomation.com/t/check-if-client-is-staging-or-published-in-script/55441 "2022-01-27T16:34:33Z")
How can i check if the client is staging or published? --- ## [Perspective - XYChart - Data from SQL - Auto requery periodically](https://forum.inductiveautomation.com/t/perspective-xychart-data-from-sql-auto-requery-periodically/55437)
**Author:** [@luc.martin](https://forum.inductiveautomation.com/u/luc.martin)\ **Replies:** 13\ **Last updated:** [January 27, 2022, 4:01pm UTC](https://forum.inductiveautomation.com/t/perspective-xychart-data-from-sql-auto-requery-periodically/55437 "2022-01-27T16:01:07Z")
I’m on 8.1.13 I search a trick to set an auto refresh with periodic interval. --- ## [Use 3rd party library](https://forum.inductiveautomation.com/t/use-3rd-party-library/55419)
**Author:** [@Arnaud\_Declerck](https://forum.inductiveautomation.com/u/Arnaud_Declerck)\ **Replies:** 3\ **Last updated:** [January 27, 2022, 2:54pm UTC](https://forum.inductiveautomation.com/t/use-3rd-party-library/55419 "2022-01-27T14:54:04Z")
Hi, Could someone help me do get this library working on ignition? or another one doing the same. I just looking on a friendly way to use json file as a database. thx [Previous page](https://forum.inductiveautomation.com/c/ignition/6.md?no_subcategories=false&page=897) [Next page](https://forum.inductiveautomation.com/c/ignition/6.md?no_subcategories=false&page=899)