# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=113

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 114

---

## [Vision Client Launcher and Redundant Gateways](https://forum.inductiveautomation.com/t/vision-client-launcher-and-redundant-gateways/112972)

<div class="topic-metadata">

**Author:** [@jay](https://forum.inductiveautomation.com/u/jay)\
**Replies:** 3\
**Last updated:** [December 23, 2025, 7:21pm UTC](https://forum.inductiveautomation.com/t/vision-client-launcher-and-redundant-gateways/112972 "2025-12-23T19:21:37Z")

</div>

Ignition v8.1 with Vision. I have a router with port forwarding between a Vision client (192.168.40.21) and redundant Ignition gateways (192.168.30.11 and 192.168.30.12). The router address is 192.168.40.1. Router po…

---

## [Perspective Timer](https://forum.inductiveautomation.com/t/perspective-timer/71176)

<div class="topic-metadata">

**Author:** [@Alex\_Guyer](https://forum.inductiveautomation.com/u/Alex_Guyer)\
**Replies:** 9\
**Last updated:** [December 23, 2025, 4:37pm UTC](https://forum.inductiveautomation.com/t/perspective-timer/71176 "2025-12-23T16:37:12Z")

</div>

Hello all, I'm needing to display a timer within a perspective session. I have a session property "MissionTime". When a button is pressed, I want it to start incrementing a timer to that property, then I can use the ses…

---

## [Power Chart Component Significant Digits](https://forum.inductiveautomation.com/t/power-chart-component-significant-digits/112967)

<div class="topic-metadata">

**Author:** [@Programmatic](https://forum.inductiveautomation.com/u/Programmatic)\
**Replies:** 0\
**Last updated:** [December 23, 2025, 4:35pm UTC](https://forum.inductiveautomation.com/t/power-chart-component-significant-digits/112967 "2025-12-23T16:35:21Z")

</div>

I’m hoping someone else has run into a similar issue or that I’m just missing a setting or configuration somewhere that needs adjusted, but the problem that I’m facing at the moment is that we have some pressure readings…

---

## [Perspective workstation don't run the script on session startup event](https://forum.inductiveautomation.com/t/perspective-workstation-dont-run-the-script-on-session-startup-event/112960)

<div class="topic-metadata">

**Author:** [@philin15](https://forum.inductiveautomation.com/u/philin15)\
**Replies:** 2\
**Last updated:** [December 23, 2025, 4:35pm UTC](https://forum.inductiveautomation.com/t/perspective-workstation-dont-run-the-script-on-session-startup-event/112960 "2025-12-23T16:35:07Z")

</div>

I want get the basic parameters from db when I start this session.And I add the scripts on session Startup event, it works well when opened through brower but it can’t work when opened through workstation. So what’s the …

---

## [Unable to write to Niagara via Bacnet IP](https://forum.inductiveautomation.com/t/unable-to-write-to-niagara-via-bacnet-ip/112965)

<div class="topic-metadata">

**Author:** [@garrett.nerone](https://forum.inductiveautomation.com/u/garrett.nerone)\
**Replies:** 3\
**Last updated:** [December 23, 2025, 4:00pm UTC](https://forum.inductiveautomation.com/t/unable-to-write-to-niagara-via-bacnet-ip/112965 "2025-12-23T16:00:01Z")

</div>

I am trying to control setpoints for VAVs using a distech JACE on ignition. When I try and change the value of one of the imported tags, I get the error “Error writing to Present\_Value.value: Bad("Bad\_NotWritable: The ac…

---

## [KyvisLabs ApexChart Module](https://forum.inductiveautomation.com/t/kyvislabs-apexchart-module/55263)

<div class="topic-metadata">

**Author:** [@kyvislabs](https://forum.inductiveautomation.com/u/kyvislabs)\
**Replies:** 166\
**Last updated:** [December 23, 2025, 1:59pm UTC](https://forum.inductiveautomation.com/t/kyvislabs-apexchart-module/55263 "2025-12-23T13:59:11Z")

</div>

Hello All, We have been working on a few modules lately, one of them being an Apex Charts module. We have been using this module for certain clients for the last few months, and in a few home automation systems, mine i…

---

## [Perspective Drawing Editor in 8.3 not in 8.1?](https://forum.inductiveautomation.com/t/perspective-drawing-editor-in-8-3-not-in-8-1/64911)

<div class="topic-metadata">

**Author:** [@mazeyrat](https://forum.inductiveautomation.com/u/mazeyrat)\
**Replies:** 10\
**Last updated:** [December 23, 2025, 1:40pm UTC](https://forum.inductiveautomation.com/t/perspective-drawing-editor-in-8-3-not-in-8-1/64911 "2025-12-23T13:40:13Z")

</div>

Some of the features coming in 8.3, like the fervently awaited Perspective Drawing Editor, got a shout-out during the Q&A portion of the session, exemplifying how crucial the community/developer feedback loop is to m…

---

## [IGN-13898 Form Component - Unexpected Clearing of the Widgets on Enter Key Press](https://forum.inductiveautomation.com/t/ign-13898-form-component-unexpected-clearing-of-the-widgets-on-enter-key-press/109613)

<div class="topic-metadata">

**Author:** [@jcumming](https://forum.inductiveautomation.com/u/jcumming)\
**Replies:** 6\
**Last updated:** [December 23, 2025, 1:24pm UTC](https://forum.inductiveautomation.com/t/ign-13898-form-component-unexpected-clearing-of-the-widgets-on-enter-key-press/109613 "2025-12-23T13:24:25Z")

</div>

Hi All, I’m messing around with 8.3 beta and enjoying some of the new features very much. One thing I am particularly interested in is the Form component in Perspective (pretty much everything I work on is in Perspectiv…

---

## [Right margin not working in Perspective – Table Component](https://forum.inductiveautomation.com/t/right-margin-not-working-in-perspective-table-component/112963)

<div class="topic-metadata">

**Author:** [@haasith.saisarakinti](https://forum.inductiveautomation.com/u/haasith.saisarakinti)\
**Replies:** 0\
**Last updated:** [December 23, 2025, 1:06pm UTC](https://forum.inductiveautomation.com/t/right-margin-not-working-in-perspective-table-component/112963 "2025-12-23T13:06:28Z")

</div>

I’m seeing an issue in Ignition Perspective - Table component where the left margin works correctly, but the right margin is not being applied. Top and bottom margins are fine. The content aligns properly on the left,…

---

## [Moved Gateway to https and cannot connect!](https://forum.inductiveautomation.com/t/moved-gateway-to-https-and-cannot-connect/112848)

<div class="topic-metadata">

**Author:** [@mdemaris](https://forum.inductiveautomation.com/u/mdemaris)\
**Replies:** 3\
**Last updated:** [December 23, 2025, 2:10am UTC](https://forum.inductiveautomation.com/t/moved-gateway-to-https-and-cannot-connect/112848 "2025-12-23T02:10:17Z")

</div>

Hey all, I just changed our production gateway to HTTPS and cannot reconnect to the Gateway. The browser says it cannot reach this page. It worked fine on the Developer, not sure what is causing the problem here! How…

---

## [Creating a dynamic openapi schema](https://forum.inductiveautomation.com/t/creating-a-dynamic-openapi-schema/112955)

<div class="topic-metadata">

**Author:** [@Isaac\_Apodaca](https://forum.inductiveautomation.com/u/Isaac_Apodaca)\
**Replies:** 0\
**Last updated:** [December 23, 2025, 12:45am UTC](https://forum.inductiveautomation.com/t/creating-a-dynamic-openapi-schema/112955 "2025-12-23T00:45:36Z")

</div>

Hey Everyone, I'm creating a module and am looking to create a dynamic openapi schema based on a type. Something like this screenshot Depending on the type, the schema changes. Any guidance or examples for this kind…

---

## [How to connect a PC locally to Ignition Edge Platform 8.1 with OPC UA drivers](https://forum.inductiveautomation.com/t/how-to-connect-a-pc-locally-to-ignition-edge-platform-8-1-with-opc-ua-drivers/112948)

<div class="topic-metadata">

**Author:** [@hector.bandoni](https://forum.inductiveautomation.com/u/hector.bandoni)\
**Replies:** 8\
**Last updated:** [December 23, 2025, 12:18am UTC](https://forum.inductiveautomation.com/t/how-to-connect-a-pc-locally-to-ignition-edge-platform-8-1-with-opc-ua-drivers/112948 "2025-12-23T00:18:56Z")

</div>

I have 5 Ignition Edge Platform licenses installed and I need to know if I can install a PC locally to control the plant in case of communication failure. The plants are in isolated but in case of failure I need to acce…

---

## [Ignition Perspective - Form component in docked view input field clears out randomly](https://forum.inductiveautomation.com/t/ignition-perspective-form-component-in-docked-view-input-field-clears-out-randomly/112718)

<div class="topic-metadata">

**Author:** [@mtorre04](https://forum.inductiveautomation.com/u/mtorre04)\
**Replies:** 1\
**Last updated:** [December 22, 2025, 11:08pm UTC](https://forum.inductiveautomation.com/t/ignition-perspective-form-component-in-docked-view-input-field-clears-out-randomly/112718 "2025-12-22T23:08:43Z")

</div>

Currently using Ignition 8.3.1 Perspective module to build a form component inside of a docked view. When typing in a text field it randomly clears out the text. After researching their were articles about pressing the e…

---

## [How to use queryAggregatedPoints with no Interpolation](https://forum.inductiveautomation.com/t/how-to-use-queryaggregatedpoints-with-no-interpolation/112951)

<div class="topic-metadata">

**Author:** [@SMcIntosh](https://forum.inductiveautomation.com/u/SMcIntosh)\
**Replies:** 6\
**Last updated:** [December 22, 2025, 9:59pm UTC](https://forum.inductiveautomation.com/t/how-to-use-queryaggregatedpoints-with-no-interpolation/112951 "2025-12-22T21:59:49Z")

</div>

I’m currently in 8.3.2. I want to use the system.historian.queryAggregatedPoints function for get the most recent tag value within each five minute interval. The interval part is fine using returnSize, but I’m finding th…

---

## [Ignition 8.1 Slow Executing Scripts](https://forum.inductiveautomation.com/t/ignition-8-1-slow-executing-scripts/97971)

<div class="topic-metadata">

**Author:** [@Jason\_Platt](https://forum.inductiveautomation.com/u/Jason_Platt)\
**Replies:** 11\
**Last updated:** [December 22, 2025, 8:43pm UTC](https://forum.inductiveautomation.com/t/ignition-8-1-slow-executing-scripts/97971 "2025-12-22T20:43:40Z")

</div>

Hey Ignition community, running into an issue here. Ill post the scripts if asked to, but I'm seeing some insanely high wait times on executing these scripts (20+ seconds). mainly moving around strings, or using a OPC ta…

---

## [Validating perspective view has updated](https://forum.inductiveautomation.com/t/validating-perspective-view-has-updated/112952)

<div class="topic-metadata">

**Author:** [@akivabrookler](https://forum.inductiveautomation.com/u/akivabrookler)\
**Replies:** 0\
**Last updated:** [December 22, 2025, 7:40pm UTC](https://forum.inductiveautomation.com/t/validating-perspective-view-has-updated/112952 "2025-12-22T19:40:08Z")

</div>

I am using webdev to request a scan of my filesystem to see if any perspective components have been updated. system.project.requestScan() I am running into a race condition where the webdev hook will return bef…

---

## [OPCUA server GeneralModelChangeEventType option](https://forum.inductiveautomation.com/t/opcua-server-generalmodelchangeeventtype-option/112946)

<div class="topic-metadata">

**Author:** [@andanurajibkumar.gup](https://forum.inductiveautomation.com/u/andanurajibkumar.gup)\
**Replies:** 6\
**Last updated:** [December 22, 2025, 4:57pm UTC](https://forum.inductiveautomation.com/t/opcua-server-generalmodelchangeeventtype-option/112946 "2025-12-22T16:57:37Z")

</div>

Hi all, I am trying to integrate external AVEVA PI OPCUA connector with Ignition OPCUA server. We are able to connect and browse succesfully but PI OPCUA connector is not able to auto-discover any new tag/device additi…

---

## [UDT OPC Path in group paste](https://forum.inductiveautomation.com/t/udt-opc-path-in-group-paste/112933)

<div class="topic-metadata">

**Author:** [@Jason\_Crockett](https://forum.inductiveautomation.com/u/Jason_Crockett)\
**Replies:** 3\
**Last updated:** [December 22, 2025, 4:21pm UTC](https://forum.inductiveautomation.com/t/udt-opc-path-in-group-paste/112933 "2025-12-22T16:21:15Z")

</div>

Version: 8.1.49 (b2025081208) I am creating my first UDT. So bare with me on my terminology and such. The UDT I am creating are for Totaflow meters. I have 3 different configs on the meters so I am trying to create 3 un…

---

## [Vision Chart - possible to show minor tick labels on logarithmic axis?](https://forum.inductiveautomation.com/t/vision-chart-possible-to-show-minor-tick-labels-on-logarithmic-axis/109651)

<div class="topic-metadata">

**Author:** [@rpavlicek](https://forum.inductiveautomation.com/u/rpavlicek)\
**Replies:** 5\
**Last updated:** [December 22, 2025, 4:20pm UTC](https://forum.inductiveautomation.com/t/vision-chart-possible-to-show-minor-tick-labels-on-logarithmic-axis/109651 "2025-12-22T16:20:39Z")

</div>

I’m creating a Classic Chart in Vision (8.1.26) and noticed that when I use the logarithmic axis, the tick labels show only the major ticks labels. It would be nice to show the minor tick labels as well. I did some loo…

---

## [Mass editing with system.tag.configure results in extra folder called "\_tags\_" in UDT definitions](https://forum.inductiveautomation.com/t/mass-editing-with-system-tag-configure-results-in-extra-folder-called-tags-in-udt-definitions/112894)

<div class="topic-metadata">

**Author:** [@Chris.Wyllie](https://forum.inductiveautomation.com/u/Chris.Wyllie)\
**Replies:** 9\
**Last updated:** [December 22, 2025, 3:29pm UTC](https://forum.inductiveautomation.com/t/mass-editing-with-system-tag-configure-results-in-extra-folder-called-tags-in-udt-definitions/112894 "2025-12-22T15:29:42Z")

</div>

Hi everyone :waving\_hand: Ignition platform 8.1.47 Using system.tag.getConfiguration and writing the output back to system.tag.configure (without any changes) will result in folders being duplicated, renamed “\_types\_“ …

---

## [Form component data to PDF or Excel](https://forum.inductiveautomation.com/t/form-component-data-to-pdf-or-excel/112944)

<div class="topic-metadata">

**Author:** [@gholappratap923](https://forum.inductiveautomation.com/u/gholappratap923)\
**Replies:** 2\
**Last updated:** [December 22, 2025, 2:27pm UTC](https://forum.inductiveautomation.com/t/form-component-data-to-pdf-or-excel/112944 "2025-12-22T14:27:19Z")

</div>

I am using the Form component in Ignition Perspective. When the user submits the form, is it possible to save the form data as a PDF or Excel file on the system?

---

## [Ignition as WebSocket client](https://forum.inductiveautomation.com/t/ignition-as-websocket-client/112935)

<div class="topic-metadata">

**Author:** [@NoWay](https://forum.inductiveautomation.com/u/NoWay)\
**Replies:** 3\
**Last updated:** [December 22, 2025, 1:35pm UTC](https://forum.inductiveautomation.com/t/ignition-as-websocket-client/112935 "2025-12-22T13:35:20Z")

</div>

Hi, I would like to set up ignition so listen to a WebSocket server as a client. What is the best practices to do so?

---

## [Gateway event tag change script vs individual bindings for 3000+ tags](https://forum.inductiveautomation.com/t/gateway-event-tag-change-script-vs-individual-bindings-for-3000-tags/112938)

<div class="topic-metadata">

**Author:** [@Tom-L](https://forum.inductiveautomation.com/u/Tom-L)\
**Replies:** 2\
**Last updated:** [December 21, 2025, 6:01pm UTC](https://forum.inductiveautomation.com/t/gateway-event-tag-change-script-vs-individual-bindings-for-3000-tags/112938 "2025-12-21T18:01:17Z")

</div>

Looking for best practice here - to update a perspective view of 3000(ish) components, is it better to have one gateway event tag change script that will do a sendMessage to update session components, or is it better to …

---

## [MQTT Transmission Connection Error](https://forum.inductiveautomation.com/t/mqtt-transmission-connection-error/112891)

<div class="topic-metadata">

**Author:** [@danig](https://forum.inductiveautomation.com/u/danig)\
**Replies:** 3\
**Last updated:** [December 21, 2025, 2:31pm UTC](https://forum.inductiveautomation.com/t/mqtt-transmission-connection-error/112891 "2025-12-21T14:31:57Z")

</div>

MQTT Transmission Connection Error We are using the MQTT Transmission module version 5.00 on an Ignition Edge gateway. The connection between the Edge station and the Ignition server (version 8.3) is implemented throug…

---

## [UaException: status=Bad\_InternalError](https://forum.inductiveautomation.com/t/uaexception-status-bad-internalerror/112929)

<div class="topic-metadata">

**Author:** [@1rdac](https://forum.inductiveautomation.com/u/1rdac)\
**Replies:** 8\
**Last updated:** [December 21, 2025, 1:00pm UTC](https://forum.inductiveautomation.com/t/uaexception-status-bad-internalerror/112929 "2025-12-21T13:00:58Z")

</div>

Getting a OPC-UA connection fault. “UaException: status=Bad\_InternalError” Any feedback on this topic. The PC was rebooted and the problem start as soon as machine rebooted.

---

## [What is the 'correct' way to build P&ID/Overviews with coordinate containers?](https://forum.inductiveautomation.com/t/what-is-the-correct-way-to-build-p-id-overviews-with-coordinate-containers/112903)

<div class="topic-metadata">

**Author:** [@Baxter](https://forum.inductiveautomation.com/u/Baxter)\
**Replies:** 4\
**Last updated:** [December 20, 2025, 4:01pm UTC](https://forum.inductiveautomation.com/t/what-is-the-correct-way-to-build-p-id-overviews-with-coordinate-containers/112903 "2025-12-20T16:01:03Z")

</div>

Firstly, I am working with Version: 8.1.39 This has been driving me mad for some time now and I feel like I am missing something simple. I want to create, for example, a P&ID screen that will scale on screen sizes acros…

---

## [OPC Write values - string?](https://forum.inductiveautomation.com/t/opc-write-values-string/54686)

<div class="topic-metadata">

**Author:** [@derick.lawrie](https://forum.inductiveautomation.com/u/derick.lawrie)\
**Replies:** 8\
**Last updated:** [December 20, 2025, 12:55am UTC](https://forum.inductiveautomation.com/t/opc-write-values-string/54686 "2025-12-20T00:55:22Z")

</div>

Hi I am investigating writing to OPC with system.opc.writeValues(opcServer, itemPaths, values) function, I have had success writing values but now I am looking at writing strings to tags and have not had much success. I…

---

## [Tag Property Nested Parameter Binding](https://forum.inductiveautomation.com/t/tag-property-nested-parameter-binding/112918)

<div class="topic-metadata">

**Author:** [@amarks](https://forum.inductiveautomation.com/u/amarks)\
**Replies:** 11\
**Last updated:** [December 19, 2025, 11:14pm UTC](https://forum.inductiveautomation.com/t/tag-property-nested-parameter-binding/112918 "2025-12-19T23:14:45Z")

</div>

Is this going to work to have a parameter binding offset bound to another parameter? ns=1;s=\[{Device\_ascpt}\]{Legacy\_ascpt}SLUDGE\_STG\_ANALOGS{Analogs\_ascpt}\[{Hr\_Index\_ascpt+{Hr\_Mn\_Offset\_ascpt}}\] If not, how do I do …

---

## [Why ever use an expression transform instead of an expression binding?](https://forum.inductiveautomation.com/t/why-ever-use-an-expression-transform-instead-of-an-expression-binding/112906)

<div class="topic-metadata">

**Author:** [@Leor\_Fishman](https://forum.inductiveautomation.com/u/Leor_Fishman)\
**Replies:** 6\
**Last updated:** [December 19, 2025, 11:08pm UTC](https://forum.inductiveautomation.com/t/why-ever-use-an-expression-transform-instead-of-an-expression-binding/112906 "2025-12-19T23:08:01Z")

</div>

i get map and script transforms, those add new capacity but why ever expression transform?

---

## [queryHistory() functionality](https://forum.inductiveautomation.com/t/queryhistory-functionality/112735)

<div class="topic-metadata">

**Author:** [@Porter\_Ellis](https://forum.inductiveautomation.com/u/Porter_Ellis)\
**Replies:** 11\
**Last updated:** [December 19, 2025, 10:36pm UTC](https://forum.inductiveautomation.com/t/queryhistory-functionality/112735 "2025-12-19T22:36:51Z")

</div>

I am using queryHistory() in my module to retrieve historical data, then preprocess the data in a specific way before using it elsewhere in the module. I have found that preprocessing after getting the query return is ac…

[Previous page](https://forum.inductiveautomation.com/latest.md?page=112)

[Next page](https://forum.inductiveautomation.com/latest.md?page=114)
