# Latest **URL:** https://forum.inductiveautomation.com/latest.md?page=1352 [Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md) **Page:** 1353 --- ## [Imported gateway but projects didn't come over, then gateway reported that it could not import project](https://forum.inductiveautomation.com/t/imported-gateway-but-projects-didnt-come-over-then-gateway-reported-that-it-could-not-import-project/35335)
**Author:** [@bkarabinchak.psi](https://forum.inductiveautomation.com/u/bkarabinchak.psi)\ **Replies:** 1\ **Last updated:** [June 4, 2020, 6:11pm UTC](https://forum.inductiveautomation.com/t/imported-gateway-but-projects-didnt-come-over-then-gateway-reported-that-it-could-not-import-project/35335 "2020-06-04T18:11:52Z")
wrapper.zip (131.0 KB) Follow up to my previous post Error trying to import a full project over another? - #5 by PGriffith Per my last post, I had trouble importing a project from one 8.0.12 designer to another, I thou… --- ## [Power table changes to next row after data entry](https://forum.inductiveautomation.com/t/power-table-changes-to-next-row-after-data-entry/35336)
**Author:** [@ijustdunnoaname1](https://forum.inductiveautomation.com/u/ijustdunnoaname1)\ **Replies:** 0\ **Last updated:** [June 4, 2020, 5:27pm UTC](https://forum.inductiveautomation.com/t/power-table-changes-to-next-row-after-data-entry/35336 "2020-06-04T17:27:46Z")
I have a power table that’s acting as a main screen for the operators. From the power table, the user can modify control values as needed. However, one of their complaints is that after they enter a numeric value and p… --- ## [\[BUG-14274\] Error when printing a report](https://forum.inductiveautomation.com/t/bug-14274-error-when-printing-a-report/25872)
**Author:** [@jlengyel](https://forum.inductiveautomation.com/u/jlengyel)\ **Replies:** 4\ **Last updated:** [June 4, 2020, 5:18pm UTC](https://forum.inductiveautomation.com/t/bug-14274-error-when-printing-a-report/25872 "2020-06-04T17:18:32Z")
Right-clicking on a report and selecting Print, then clicking Print in the Print pop-up produces the error Report has not finished loading: --- ## [Use Symbol Factory components as buttons](https://forum.inductiveautomation.com/t/use-symbol-factory-components-as-buttons/35334)
**Author:** [@dustin.corban](https://forum.inductiveautomation.com/u/dustin.corban)\ **Replies:** 2\ **Last updated:** [June 4, 2020, 5:18pm UTC](https://forum.inductiveautomation.com/t/use-symbol-factory-components-as-buttons/35334 "2020-06-04T17:18:12Z")
I am new to the Symbol Factory and i have tried to do some reading into this, but i only see where you can add animation to the components. I was hoping i could use some of the up and down arrows as buttons. Is this poss… --- ## [Problems connecting to a SLC 5/04 using DH+/EIP Bridge](https://forum.inductiveautomation.com/t/problems-connecting-to-a-slc-5-04-using-dh-eip-bridge/35332)
**Author:** [@Cory.grube](https://forum.inductiveautomation.com/u/Cory.grube)\ **Replies:** 2\ **Last updated:** [June 4, 2020, 4:23pm UTC](https://forum.inductiveautomation.com/t/problems-connecting-to-a-slc-5-04-using-dh-eip-bridge/35332 "2020-06-04T16:23:57Z")
I'm trying to connect to a SLC 5/04 over DH+ using a Prosoft AN-X2 module. This module emulates a 1756-DHRIO. I know other OPC servers support connections in this manner, and I suspect Ignition does per the user manual (… --- ## [Flex Repeater and Column Container](https://forum.inductiveautomation.com/t/flex-repeater-and-column-container/27954)
**Author:** [@David.Reed.Schmidt](https://forum.inductiveautomation.com/u/David.Reed.Schmidt)\ **Replies:** 2\ **Last updated:** [June 4, 2020, 4:10pm UTC](https://forum.inductiveautomation.com/t/flex-repeater-and-column-container/27954 "2020-06-04T16:10:02Z")
How do I get benefit of the column container along with the flex repeater. For example, if I have a list of work orders from a database and each work order has several pieces of information then how can I get the work o… --- ## [Disabled button but it still working](https://forum.inductiveautomation.com/t/disabled-button-but-it-still-working/35313)
**Author:** [@mauricio.salazar.urr](https://forum.inductiveautomation.com/u/mauricio.salazar.urr)\ **Replies:** 4\ **Last updated:** [June 4, 2020, 3:38pm UTC](https://forum.inductiveautomation.com/t/disabled-button-but-it-still-working/35313 "2020-06-04T15:38:08Z")
I need to disable the buttons, but when this property is on it just changes the background color and the button still works. Do you know what the problem may be? I am using version 7.9.8 --- ## [Numeric Text Field overflow error message](https://forum.inductiveautomation.com/t/numeric-text-field-overflow-error-message/35330)
**Author:** [@pocewar](https://forum.inductiveautomation.com/u/pocewar)\ **Replies:** 0\ **Last updated:** [June 4, 2020, 3:42pm UTC](https://forum.inductiveautomation.com/t/numeric-text-field-overflow-error-message/35330 "2020-06-04T15:42:37Z")
Hi, when having a Numeric Text Field, if you are typing a really big number (just typing it, not committing it yet) you get a “Value \[field value here\] could not be coerced to \[specific type of numeric text field here\] … --- ## [Connect UaExpert to OPC-UA server](https://forum.inductiveautomation.com/t/connect-uaexpert-to-opc-ua-server/35300)
**Author:** [@vrautomation](https://forum.inductiveautomation.com/u/vrautomation)\ **Replies:** 3\ **Last updated:** [June 4, 2020, 3:03pm UTC](https://forum.inductiveautomation.com/t/connect-uaexpert-to-opc-ua-server/35300 "2020-06-04T15:03:22Z")
Hello, I trying to connect to the Ingition’s OPC server using UAExpert (for the moment). I’m having problems. I add “None” in the security poloicies. I also checked “Anonymous access allowed”. But is is not working. I… --- ## [Derived tag, multiple bit to modbus tag](https://forum.inductiveautomation.com/t/derived-tag-multiple-bit-to-modbus-tag/34871)
**Author:** [@SBL\_MC](https://forum.inductiveautomation.com/u/SBL_MC)\ **Replies:** 8\ **Last updated:** [June 4, 2020, 2:54pm UTC](https://forum.inductiveautomation.com/t/derived-tag-multiple-bit-to-modbus-tag/34871 "2020-06-04T14:54:42Z")
Hi all, Need some advice on how to solve this. We use derived tags to set and reset bits in a modbus int, command word. This works as long as we do bit by bit. But… I got some buttons that is intended to alter 3 bits at… --- ## [Perspective Designer shows error if CSS variables used as colors](https://forum.inductiveautomation.com/t/perspective-designer-shows-error-if-css-variables-used-as-colors/35327)
**Author:** [@dkylep](https://forum.inductiveautomation.com/u/dkylep)\ **Replies:** 5\ **Last updated:** [June 4, 2020, 2:48pm UTC](https://forum.inductiveautomation.com/t/perspective-designer-shows-error-if-css-variables-used-as-colors/35327 "2020-06-04T14:48:04Z")
I thought it would be a good idea to utilize some of the CSS variables to set some of my background colors. I wanted my project to remain consistent with the selected theme. I'm using nighlty 8.0.14 (b2020051802) which… --- ## [Document Storage and Ignition](https://forum.inductiveautomation.com/t/document-storage-and-ignition/35288)
**Author:** [@kgamble](https://forum.inductiveautomation.com/u/kgamble)\ **Replies:** 4\ **Last updated:** [June 4, 2020, 2:21pm UTC](https://forum.inductiveautomation.com/t/document-storage-and-ignition/35288 "2020-06-04T14:21:29Z")
I have quite of a bit of experience with MSSQL and other traditional relational databases, but the concept of Document storage is rather new to me. Working so consistently in perspective for the past year has really open… --- ## [Plotting a 2 header \["t\_stamp", "value"\] dataset into an easy chart](https://forum.inductiveautomation.com/t/plotting-a-2-header-t-stamp-value-dataset-into-an-easy-chart/35324)
**Author:** [@mdia](https://forum.inductiveautomation.com/u/mdia)\ **Replies:** 1\ **Last updated:** [June 4, 2020, 1:55pm UTC](https://forum.inductiveautomation.com/t/plotting-a-2-header-t-stamp-value-dataset-into-an-easy-chart/35324 "2020-06-04T13:55:23Z")
I am getting data using the httpGet function and then constructing a 2 header \[“t\_stamp”,“values”\] dataset using that data that I got from the API request. I am successfully able to write that dataset to the “data” prope… --- ## [Wrapper Log Filling with Exception in thread](https://forum.inductiveautomation.com/t/wrapper-log-filling-with-exception-in-thread/34084)
**Author:** [@mstone](https://forum.inductiveautomation.com/u/mstone)\ **Replies:** 2\ **Last updated:** [June 4, 2020, 1:41pm UTC](https://forum.inductiveautomation.com/t/wrapper-log-filling-with-exception-in-thread/34084 "2020-06-04T13:41:10Z")
It appears to reference a thread that isn’t listed on the gateway Threads page. How do I get more info on this to find the problem? Here is a paste: Exception in thread Thread-1697138:Traceback (most recent call last)… --- ## [Lookup Table Dynamic Dropdown Exchange Template: Failed to Import](https://forum.inductiveautomation.com/t/lookup-table-dynamic-dropdown-exchange-template-failed-to-import/35294)
**Author:** [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\ **Replies:** 3\ **Last updated:** [June 4, 2020, 1:34pm UTC](https://forum.inductiveautomation.com/t/lookup-table-dynamic-dropdown-exchange-template-failed-to-import/35294 "2020-06-04T13:34:49Z")
This is my first attempt at using Exchange. I downloaded and unzipped the Lookup Table Dynamic Dropped for Vision. When I right click Templates in the designer then import. I select the .proj file and I get this erro… --- ## [system.tag.queryTagHistory response time in vision](https://forum.inductiveautomation.com/t/system-tag-querytaghistory-response-time-in-vision/35282)
**Author:** [@nouh.qaoud](https://forum.inductiveautomation.com/u/nouh.qaoud)\ **Replies:** 2\ **Last updated:** [June 4, 2020, 1:10pm UTC](https://forum.inductiveautomation.com/t/system-tag-querytaghistory-response-time-in-vision/35282 "2020-06-04T13:10:11Z")
Dears I have a report which query data from historical using “system.tag.queryTagHistory” via its script. This report response is fast and accurate , but when apply the same script in Vision , i get the same results bu… --- ## [Ip camera viewer](https://forum.inductiveautomation.com/t/ip-camera-viewer/9951)
**Author:** [@jkelleyus](https://forum.inductiveautomation.com/u/jkelleyus)\ **Replies:** 13\ **Last updated:** [June 4, 2020, 12:45pm UTC](https://forum.inductiveautomation.com/t/ip-camera-viewer/9951 "2020-06-04T12:45:00Z")
Will the ip camera viewer display a RTSP stream? If not, then why not? An old standard MJPEG stream is useless to most customers, and it appears users have been asking for newer stream flexibility for several years. I'… --- ## [System Slowing down over a period](https://forum.inductiveautomation.com/t/system-slowing-down-over-a-period/35238)
**Author:** [@ashwin.m](https://forum.inductiveautomation.com/u/ashwin.m)\ **Replies:** 3\ **Last updated:** [June 4, 2020, 11:37am UTC](https://forum.inductiveautomation.com/t/system-slowing-down-over-a-period/35238 "2020-06-04T11:37:41Z")
Hi, I am facing a sever system lag, when i open Ignition,MS SQL and other supporting software’s of the PLC. When i check the Task Manager, 'Zulu Platform \*64 Architecture ’ occupies most of the CPU. Is there a way i … --- ## [Cannot list connected clients - Ignition v7.9.4](https://forum.inductiveautomation.com/t/cannot-list-connected-clients-ignition-v7-9-4/35281)
**Author:** [@szcz](https://forum.inductiveautomation.com/u/szcz)\ **Replies:** 4\ **Last updated:** [June 4, 2020, 7:38am UTC](https://forum.inductiveautomation.com/t/cannot-list-connected-clients-ignition-v7-9-4/35281 "2020-06-04T07:38:05Z")
Hello all, In Ignition 7.9.4, I have problem to list who has which application launched. I would like to check if some people aren’t using a “guest” account: …this has been shown for like last 20 minutes. …has any … --- ## [system.net.httpClient()](https://forum.inductiveautomation.com/t/system-net-httpclient/35317)
**Author:** [@ashwin.m](https://forum.inductiveautomation.com/u/ashwin.m)\ **Replies:** 0\ **Last updated:** [June 4, 2020, 4:57am UTC](https://forum.inductiveautomation.com/t/system-net-httpclient/35317 "2020-06-04T04:57:17Z")
Hi, I tried using system.net.httpClient() in the web dev module to access another API, but with i run the resource it shows an error where i have declared the in built function. I could not figure out what’s causing th… --- ## [Chart Inverted Y Axis](https://forum.inductiveautomation.com/t/chart-inverted-y-axis/35314)
**Author:** [@thowsham](https://forum.inductiveautomation.com/u/thowsham)\ **Replies:** 0\ **Last updated:** [June 4, 2020, 2:58am UTC](https://forum.inductiveautomation.com/t/chart-inverted-y-axis/35314 "2020-06-04T02:58:19Z")
Is there a way to Have an Easy Chart to show with an inverted Y axis? i.e. Lowest Position Y value 650 and highest Position Y value 370 If not can I do this with another chart object? --- ## [Tag subscription provider warnings in the log](https://forum.inductiveautomation.com/t/tag-subscription-provider-warnings-in-the-log/32089)
**Author:** [@mpoulsen921](https://forum.inductiveautomation.com/u/mpoulsen921)\ **Replies:** 1\ **Last updated:** [June 3, 2020, 11:30pm UTC](https://forum.inductiveautomation.com/t/tag-subscription-provider-warnings-in-the-log/32089 "2020-06-03T23:30:25Z")
Hi, I am seeing a lot of entries in the logs concerning the tags.subscriptions.provider. It is the warning message: “Tag value publish encountered X listeners that were no longer valid. These listeners have been removed… --- ## [How to Connect ignition software with Micrex-F Fuji PLC?](https://forum.inductiveautomation.com/t/how-to-connect-ignition-software-with-micrex-f-fuji-plc/35299)
**Author:** [@asifiqbal138](https://forum.inductiveautomation.com/u/asifiqbal138)\ **Replies:** 3\ **Last updated:** [June 3, 2020, 7:01pm UTC](https://forum.inductiveautomation.com/t/how-to-connect-ignition-software-with-micrex-f-fuji-plc/35299 "2020-06-03T19:01:51Z")
Hello i just know about this software and want to know that can i use this software to make pc base hmi to monitor tags of Micrex-F fuji PLC? please suggest . Thanks, asif --- ## [Report download xls](https://forum.inductiveautomation.com/t/report-download-xls/22114)
**Author:** [@Alok.Vijayakumar](https://forum.inductiveautomation.com/u/Alok.Vijayakumar)\ **Replies:** 3\ **Last updated:** [June 3, 2020, 5:27pm UTC](https://forum.inductiveautomation.com/t/report-download-xls/22114 "2020-06-03T17:27:04Z")
when i try to download report in xls format from the report viewer on button click, i am receiving following error Traceback (most recent call last): File “event:actionPerformed”, line 16, in com.inductiveautomation.… --- ## [Reading a OPC UA Array in Designer](https://forum.inductiveautomation.com/t/reading-a-opc-ua-array-in-designer/31878)
**Author:** [@jespinmartin1](https://forum.inductiveautomation.com/u/jespinmartin1)\ **Replies:** 9\ **Last updated:** [June 3, 2020, 3:51pm UTC](https://forum.inductiveautomation.com/t/reading-a-opc-ua-array-in-designer/31878 "2020-06-03T15:51:04Z")
I’m reading OPC Client values from PLCSIM Advanced. Everything was going ok until an array appeared. On the gateway, I can read these values in the Quick Client with good quality, but when I try to add it to the project… --- ## [Current Schedule Data](https://forum.inductiveautomation.com/t/current-schedule-data/35153)
**Author:** [@john.ackley](https://forum.inductiveautomation.com/u/john.ackley)\ **Replies:** 5\ **Last updated:** [June 3, 2020, 2:17pm UTC](https://forum.inductiveautomation.com/t/current-schedule-data/35153 "2020-06-03T14:17:27Z")
Is there a way to grab the current running schedule’s data to use in a script? I am trying to compare a production run’s end date and time to the current schedule’s end date and time for some calculations I need to do. T… --- ## [Perspective dynamic dropdown with translation required](https://forum.inductiveautomation.com/t/perspective-dynamic-dropdown-with-translation-required/35289)
**Author:** [@luc.martin](https://forum.inductiveautomation.com/u/luc.martin)\ **Replies:** 0\ **Last updated:** [June 3, 2020, 1:09pm UTC](https://forum.inductiveautomation.com/t/perspective-dynamic-dropdown-with-translation-required/35289 "2020-06-03T13:09:16Z")
I search a way to be able to add translation into a dynamic dropdown. I have create UDT for some units and I want to be able to translate the “Engineering unit”. I have tried to use translation function in binding but … --- ## [Use Ignition to pull data from OmniLink 5000 Controllers / LinkNET system](https://forum.inductiveautomation.com/t/use-ignition-to-pull-data-from-omnilink-5000-controllers-linknet-system/35206)
**Author:** [@jmchristy](https://forum.inductiveautomation.com/u/jmchristy)\ **Replies:** 9\ **Last updated:** [June 3, 2020, 12:21pm UTC](https://forum.inductiveautomation.com/t/use-ignition-to-pull-data-from-omnilink-5000-controllers-linknet-system/35206 "2020-06-03T12:21:25Z")
Looking for some help. We have an older LinkNET system that integrates with a bunch of different machines. They are using OmniLink controllers to pull data from the machines and it’s being captured by a PC running the … --- ## [Perspective Docked view only executes script when loading for the first time](https://forum.inductiveautomation.com/t/perspective-docked-view-only-executes-script-when-loading-for-the-first-time/35274)
**Author:** [@321liftoff](https://forum.inductiveautomation.com/u/321liftoff)\ **Replies:** 1\ **Last updated:** [June 3, 2020, 12:20pm UTC](https://forum.inductiveautomation.com/t/perspective-docked-view-only-executes-script-when-loading-for-the-first-time/35274 "2020-06-03T12:20:02Z")
I have a Docked View containing a Menu Tree component. I have a Project script function bound to the “items” property of the Menu Tree. The script generates the JSON to populate the Menu Tree. When I open a new tab, I… --- ## [How to modify the vision login interface](https://forum.inductiveautomation.com/t/how-to-modify-the-vision-login-interface/35286)
**Author:** [@m15195757181](https://forum.inductiveautomation.com/u/m15195757181)\ **Replies:** 0\ **Last updated:** [June 3, 2020, 12:03pm UTC](https://forum.inductiveautomation.com/t/how-to-modify-the-vision-login-interface/35286 "2020-06-03T12:03:28Z")
How do I modify the vision’s default login screen when I run launch？ [Previous page](https://forum.inductiveautomation.com/latest.md?page=1351) [Next page](https://forum.inductiveautomation.com/latest.md?page=1353)