# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=15

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 16

---

## [Automation Professionals' EtherNet/IP Communication Suite V2](https://forum.inductiveautomation.com/t/automation-professionals-ethernet-ip-communication-suite-v2/68190)

<div class="topic-metadata">

**Author:** [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Replies:** 221\
**Last updated:** [September 14, 2026, 2:39pm UTC](https://forum.inductiveautomation.com/t/automation-professionals-ethernet-ip-communication-suite-v2/68190 "2026-09-14T14:39:56Z")

</div>

Automation Professionals is pleased to announce its latest EtherNet/IP Communications Suite driver module, a major upgrade to its EtherNet/IP Class1 Communications module, as a Public Beta. As of April 15, 2023, this is…

---

## [OPC UA connections become unstable in Ignition 8.3.8](https://forum.inductiveautomation.com/t/opc-ua-connections-become-unstable-in-ignition-8-3-8/116474)

<div class="topic-metadata">

**Author:** [@Michal\_Goralczyk](https://forum.inductiveautomation.com/u/Michal_Goralczyk)\
**Replies:** 8\
**Last updated:** [September 14, 2026, 2:08pm UTC](https://forum.inductiveautomation.com/t/opc-ua-connections-become-unstable-in-ignition-8-3-8/116474 "2026-09-14T14:08:05Z")

</div>

Hello, After upgrading our Ignition architecture from version 8.1 to 8.3.8, we started experiencing a gradual loss of stability in OPC UA client connections. The same devices and network infrastructure worked correctly…

---

## [Ignition Memory Usage](https://forum.inductiveautomation.com/t/ignition-memory-usage/64186)

<div class="topic-metadata">

**Author:** [@bbledsoe1](https://forum.inductiveautomation.com/u/bbledsoe1)\
**Replies:** 21\
**Last updated:** [September 14, 2026, 1:31pm UTC](https://forum.inductiveautomation.com/t/ignition-memory-usage/64186 "2026-09-14T13:31:14Z")

</div>

We have been experiencing memory usage problems with our Ignition installation. On average our system consumes about 365MB / Day of alloted memory. Our system is small and only has 4699 tags. The primary provider fo…

---

## [Table component crash with custom cell views](https://forum.inductiveautomation.com/t/table-component-crash-with-custom-cell-views/117008)

<div class="topic-metadata">

**Author:** [@alice.herbst](https://forum.inductiveautomation.com/u/alice.herbst)\
**Replies:** 2\
**Last updated:** [September 14, 2026, 11:30am UTC](https://forum.inductiveautomation.com/t/table-component-crash-with-custom-cell-views/117008 "2026-09-14T11:30:05Z")

</div>

I'm having troubles with the table component while rendering multiple "events" in a table cell. I have a table with columns that use an embedded view. That embedded view accepts an array of objects in its \`value\` view p…

---

## [Machine Learning Manager](https://forum.inductiveautomation.com/t/machine-learning-manager/87333)

<div class="topic-metadata">

**Author:** [@Victor\_Alcolea](https://forum.inductiveautomation.com/u/Victor_Alcolea)\
**Replies:** 2\
**Last updated:** [September 14, 2026, 6:35am UTC](https://forum.inductiveautomation.com/t/machine-learning-manager/87333 "2026-09-14T06:35:55Z")

</div>

Greetings everyone, I have installed the ML manager module from ignition exchange. The model i want to create is mainly for regression, I have managed to train the model but i dont know how can i test my model with fu…

---

## [App/home and web/home](https://forum.inductiveautomation.com/t/app-home-and-web-home/117067)

<div class="topic-metadata">

**Author:** [@george20151010](https://forum.inductiveautomation.com/u/george20151010)\
**Replies:** 5\
**Last updated:** [September 14, 2026, 5:25am UTC](https://forum.inductiveautomation.com/t/app-home-and-web-home/117067 "2026-09-14T05:25:52Z")

</div>

What is the difference between “localhost:8088/app/home” and “localhost:8088/web/home”? Why can I only open the first one?

---

## [Degree symbol (°) in report?](https://forum.inductiveautomation.com/t/degree-symbol-in-report/117069)

<div class="topic-metadata">

**Author:** [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\
**Replies:** 2\
**Last updated:** [September 13, 2026, 5:55pm UTC](https://forum.inductiveautomation.com/t/degree-symbol-in-report/117069 "2026-09-13T17:55:17Z")

</div>

I imagine someone has needed to add the ° symbol into a report before. How did you do it? The normal Alt+0176, etc. doesn't work and reports don't accept HTML entities. Thanks!

---

## [Ignition architecture considerations](https://forum.inductiveautomation.com/t/ignition-architecture-considerations/117038)

<div class="topic-metadata">

**Author:** [@eaolson](https://forum.inductiveautomation.com/u/eaolson)\
**Replies:** 2\
**Last updated:** [September 12, 2026, 2:32pm UTC](https://forum.inductiveautomation.com/t/ignition-architecture-considerations/117038 "2026-09-12T14:32:08Z")

</div>

We're planning to deploy Ignition and Edge to some remote sites, probably with a hub-and-spoke type architecture. I'm trying to work through some of the potential issues. Is there an advantage to adding an MQTT broker t…

---

## [Creating a text read out to display PowerFlex 525 faults based on fault integer tag](https://forum.inductiveautomation.com/t/creating-a-text-read-out-to-display-powerflex-525-faults-based-on-fault-integer-tag/58523)

<div class="topic-metadata">

**Author:** [@Cameron\_Emmick](https://forum.inductiveautomation.com/u/Cameron_Emmick)\
**Replies:** 7\
**Last updated:** [September 12, 2026, 9:51am UTC](https://forum.inductiveautomation.com/t/creating-a-text-read-out-to-display-powerflex-525-faults-based-on-fault-integer-tag/58523 "2026-09-12T09:51:39Z")

</div>

Hello, I am working with a PowerFlex 525 and want a text display that will give a readout of the fault based on the VFD’s integer tag. It would be nice if it went into a table and one object changed text based off this …

---

## [Timeout error after upgrading to Ignition 8.3.7](https://forum.inductiveautomation.com/t/timeout-error-after-upgrading-to-ignition-8-3-7/116411)

<div class="topic-metadata">

**Author:** [@Michal\_Goralczyk](https://forum.inductiveautomation.com/u/Michal_Goralczyk)\
**Replies:** 10\
**Last updated:** [September 11, 2026, 6:47pm UTC](https://forum.inductiveautomation.com/t/timeout-error-after-upgrading-to-ignition-8-3-7/116411 "2026-09-11T18:47:17Z")

</div>

Hello, I upgraded our Ignition system from version 8.1.52 to 8.3.7 last night. We have one central Gateway connected to five I/O Gateways. I upgraded all of them, but something went wrong on one of the I/O Gateways. Wh…

---

## [Automation Professionals' Blob Server Module](https://forum.inductiveautomation.com/t/automation-professionals-blob-server-module/57970)

<div class="topic-metadata">

**Author:** [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Replies:** 134\
**Last updated:** [September 11, 2026, 3:12pm UTC](https://forum.inductiveautomation.com/t/automation-professionals-blob-server-module/57970 "2026-09-11T15:12:27Z")

</div>

Automation Professionals is pleased to announce an alpha release of its new Blob Server Module. Available only for Ignition v8.1, here. The Blob Server Module provides a simple way to deliver images, PDF files, or othe…

---

## [Ignition 8.1.52 to 8.3.9 Upgrade - Tags Moved to System](https://forum.inductiveautomation.com/t/ignition-8-1-52-to-8-3-9-upgrade-tags-moved-to-system/117057)

<div class="topic-metadata">

**Author:** [@dwb](https://forum.inductiveautomation.com/u/dwb)\
**Replies:** 2\
**Last updated:** [September 11, 2026, 2:28pm UTC](https://forum.inductiveautomation.com/t/ignition-8-1-52-to-8-3-9-upgrade-tags-moved-to-system/117057 "2026-09-11T14:28:49Z")

</div>

Hi, I upgraded two gateways from Ignition 8.1.52 to 8.3.39, and both ended up with the same issue. All OPC connections are working, and I can browse and read live PLC values normally. However, the tags from the provid…

---

## [Allen-Bradley Logix Driver vs. FTLinx Gateway](https://forum.inductiveautomation.com/t/allen-bradley-logix-driver-vs-ftlinx-gateway/104015)

<div class="topic-metadata">

**Author:** [@Clay\_Buysse](https://forum.inductiveautomation.com/u/Clay_Buysse)\
**Replies:** 5\
**Last updated:** [September 11, 2026, 1:47pm UTC](https://forum.inductiveautomation.com/t/allen-bradley-logix-driver-vs-ftlinx-gateway/104015 "2026-09-11T13:47:42Z")

</div>

I'm currently in the process of translating an in-house developed SCADA solution to Ignition. In all previous projects using Allen-Bradley PLC's I've just used Ignition's built-in Logix Driver to connect to the PLC with…

---

## [Ignition 8.1.45 designer asking for monitor sharing](https://forum.inductiveautomation.com/t/ignition-8-1-45-designer-asking-for-monitor-sharing/102767)

<div class="topic-metadata">

**Author:** [@pgmo](https://forum.inductiveautomation.com/u/pgmo)\
**Replies:** 14\
**Last updated:** [September 11, 2026, 1:26pm UTC](https://forum.inductiveautomation.com/t/ignition-8-1-45-designer-asking-for-monitor-sharing/102767 "2026-09-11T13:26:38Z")

</div>

Hi all, opening a designer from an Ignition 8.1.45 gateway I've been asked to share my monitor (I'm on Ubuntu 24.04) and an icon appears from time to time on the activity bar like the following Any idea? Thanks in a…

---

## [Rapid Retriggering Of Trigger Once Transaction Group Fails](https://forum.inductiveautomation.com/t/rapid-retriggering-of-trigger-once-transaction-group-fails/117046)

<div class="topic-metadata">

**Author:** [@alke](https://forum.inductiveautomation.com/u/alke)\
**Replies:** 1\
**Last updated:** [September 11, 2026, 12:11pm UTC](https://forum.inductiveautomation.com/t/rapid-retriggering-of-trigger-once-transaction-group-fails/117046 "2026-09-11T12:11:30Z")

</div>

I have a triggered transaction group that logs parts as they come off the line, a few seconds between parts, and this works perfectly. However, on some occasions such as an unexpected stop, I want to log data for all the…

---

## [Change some translation terms after Ignition upgrade from 8.1.16 to 8.3.6 version](https://forum.inductiveautomation.com/t/change-some-translation-terms-after-ignition-upgrade-from-8-1-16-to-8-3-6-version/117056)

<div class="topic-metadata">

**Author:** [@stefano.sforna](https://forum.inductiveautomation.com/u/stefano.sforna)\
**Replies:** 0\
**Last updated:** [September 11, 2026, 12:09pm UTC](https://forum.inductiveautomation.com/t/change-some-translation-terms-after-ignition-upgrade-from-8-1-16-to-8-3-6-version/117056 "2026-09-11T12:09:42Z")

</div>

Good afternoon, after upgrade my project from Ignition version 8.1.16 to 8.3.6, there are some translation terms changed. For example transaltiom terms: QF86.2 Termica Skip 1 in Allarme, it's changed in : QF862 Termica …

---

## [ToddySoft Connect 1.2.0 — Beckhoff ADS driver for Ignition (now with auto discovery & automated route setup)](https://forum.inductiveautomation.com/t/toddysoft-connect-1-2-0-beckhoff-ads-driver-for-ignition-now-with-auto-discovery-automated-route-setup/117048)

<div class="topic-metadata">

**Author:** [@christofer.dutz](https://forum.inductiveautomation.com/u/christofer.dutz)\
**Replies:** 0\
**Last updated:** [September 11, 2026, 7:59am UTC](https://forum.inductiveautomation.com/t/toddysoft-connect-1-2-0-beckhoff-ads-driver-for-ignition-now-with-auto-discovery-automated-route-setup/117048 "2026-09-11T07:59:38Z")

</div>

Connecting Inductive Automation Ignition to a Beckhoff Automation controller used to involve a detour: find the AMS Net ID, type it in, then log into the PLC and register an AMS route before Ignition could talk to it at …

---

## [Application Login Issue](https://forum.inductiveautomation.com/t/application-login-issue/79207)

<div class="topic-metadata">

**Author:** [@Sourabh\_Ambildhuke](https://forum.inductiveautomation.com/u/Sourabh_Ambildhuke)\
**Replies:** 1\
**Last updated:** [September 10, 2026, 11:43pm UTC](https://forum.inductiveautomation.com/t/application-login-issue/79207 "2026-09-10T23:43:08Z")

</div>

Hello, I am facing issue with application login. So, here is the scenario we have 2 production Ignition servers which is on AWS and share load using load balancers. We have setup IDP as Azure Active directory and when w…

---

## [MCP Module - Persistent 405 Error](https://forum.inductiveautomation.com/t/mcp-module-persistent-405-error/117021)

<div class="topic-metadata">

**Author:** [@Eric\_Doucet](https://forum.inductiveautomation.com/u/Eric_Doucet)\
**Replies:** 1\
**Last updated:** [September 10, 2026, 6:24pm UTC](https://forum.inductiveautomation.com/t/mcp-module-persistent-405-error/117021 "2026-09-10T18:24:35Z")

</div>

Continuing the discussion from MCP Module Early Access: Persistent 403 Forbidden on /data/mcp/ — everything checks out except the actual request I'm stuck on a generic 403 Forbidden from the MCP module's runtime endpoin…

---

## [Perspective Table Row Height not working with embedded view columns](https://forum.inductiveautomation.com/t/perspective-table-row-height-not-working-with-embedded-view-columns/78382)

<div class="topic-metadata">

**Author:** [@liam1](https://forum.inductiveautomation.com/u/liam1)\
**Replies:** 6\
**Last updated:** [September 10, 2026, 5:06pm UTC](https://forum.inductiveautomation.com/t/perspective-table-row-height-not-working-with-embedded-view-columns/78382 "2026-09-10T17:06:55Z")

</div>

The Row Height Property on the table does not work when columns have embedded views set The only work around I have found is to use props.cells.style.height to alter the the height but this now means the embedded view…

---

## [How safe are multiple systems writing to the same PLC location?](https://forum.inductiveautomation.com/t/how-safe-are-multiple-systems-writing-to-the-same-plc-location/117044)

<div class="topic-metadata">

**Author:** [@peter](https://forum.inductiveautomation.com/u/peter)\
**Replies:** 4\
**Last updated:** [September 10, 2026, 4:31pm UTC](https://forum.inductiveautomation.com/t/how-safe-are-multiple-systems-writing-to-the-same-plc-location/117044 "2026-09-10T16:31:58Z")

</div>

Suppose you have 1 PLC, and 2 totally independent HMIs (and in physically separate locations). And you want to set a value in the PLC from either of the HMIs. How bad would it be to simply have a button on each HMI tha…

---

## [Perspective Dropdown: Allow user-select](https://forum.inductiveautomation.com/t/perspective-dropdown-allow-user-select/117043)

<div class="topic-metadata">

**Author:** [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\
**Replies:** 1\
**Last updated:** [September 10, 2026, 3:00pm UTC](https://forum.inductiveautomation.com/t/perspective-dropdown-allow-user-select/117043 "2026-09-10T15:00:47Z")

</div>

Is there anyway to allow the selected single value of a perspective dropdown to be highlighted for use with ctrl+v? I've tried these without luck: .psc-Dropdowns\\/AllowHighlight .ia\_dropdown.iaDropdownCommon .ia\_dropdo…

---

## [IA's Solar & BESS Discovery Day - July 8](https://forum.inductiveautomation.com/t/ias-solar-bess-discovery-day-july-8/115848)

<div class="topic-metadata">

**Author:** [@msteele](https://forum.inductiveautomation.com/u/msteele)\
**Replies:** 5\
**Last updated:** [September 10, 2026, 2:48pm UTC](https://forum.inductiveautomation.com/t/ias-solar-bess-discovery-day-july-8/115848 "2026-09-10T14:48:14Z")

</div>

Anyone else going to this event?

---

## [Possible Bug in v8.3 with Classic Authentication Mode for Designer w/ AD Failover to Local Source](https://forum.inductiveautomation.com/t/possible-bug-in-v8-3-with-classic-authentication-mode-for-designer-w-ad-failover-to-local-source/116991)

<div class="topic-metadata">

**Author:** [@michael.flagler](https://forum.inductiveautomation.com/u/michael.flagler)\
**Replies:** 4\
**Last updated:** [September 10, 2026, 2:30pm UTC](https://forum.inductiveautomation.com/t/possible-bug-in-v8-3-with-classic-authentication-mode-for-designer-w-ad-failover-to-local-source/116991 "2026-09-10T14:30:30Z")

</div>

I may have stumbled upon a bug when using classic authentication mode with an Active Directory user source with soft or hard failover to a local/internal user source when the Active Directory user source is not available…

---

## [Passing Data from Inline Frame to Perspective Page](https://forum.inductiveautomation.com/t/passing-data-from-inline-frame-to-perspective-page/117041)

<div class="topic-metadata">

**Author:** [@flavien](https://forum.inductiveautomation.com/u/flavien)\
**Replies:** 1\
**Last updated:** [September 10, 2026, 1:33pm UTC](https://forum.inductiveautomation.com/t/passing-data-from-inline-frame-to-perspective-page/117041 "2026-09-10T13:33:49Z")

</div>

Hi, I'm building a two-way communication bridge between a Perspective view and an embedded HTML page (via the Iframe component), using the WebDev module : Perspective View --\> HTML Page : OK HTML Page --\> Perspective …

---

## [Report Module: Tag Historian Query dynamic tags list](https://forum.inductiveautomation.com/t/report-module-tag-historian-query-dynamic-tags-list/23303)

<div class="topic-metadata">

**Author:** [@pgmo](https://forum.inductiveautomation.com/u/pgmo)\
**Replies:** 15\
**Last updated:** [September 10, 2026, 11:12am UTC](https://forum.inductiveautomation.com/t/report-module-tag-historian-query-dynamic-tags-list/23303 "2026-09-10T11:12:37Z")

</div>

My customer would like to build a chart report dynamically. He would like to decide which and how many historical tags will be plotted on the report just at the report print out time. I managed to use input report param…

---

## [I can't drag images into image manager 8.3.8](https://forum.inductiveautomation.com/t/i-cant-drag-images-into-image-manager-8-3-8/116784)

<div class="topic-metadata">

**Author:** [@m.pelagatti](https://forum.inductiveautomation.com/u/m.pelagatti)\
**Replies:** 17\
**Last updated:** [September 9, 2026, 9:02pm UTC](https://forum.inductiveautomation.com/t/i-cant-drag-images-into-image-manager-8-3-8/116784 "2026-09-09T21:02:32Z")

</div>

Hi everyone, when I drag an image from the virtual machine to the image management window, a red circle appears, preventing me from uploading it. The file is inside the virtual machine where the designer resides. The ga…

---

## [Graphical overlay bug on equipment schedule component](https://forum.inductiveautomation.com/t/graphical-overlay-bug-on-equipment-schedule-component/117035)

<div class="topic-metadata">

**Author:** [@stuart.williams1](https://forum.inductiveautomation.com/u/stuart.williams1)\
**Replies:** 4\
**Last updated:** [September 9, 2026, 6:29pm UTC](https://forum.inductiveautomation.com/t/graphical-overlay-bug-on-equipment-schedule-component/117035 "2026-09-09T18:29:08Z")

</div>

I am using the Equipment Schedule vision component to visually show customer orders within a time range using the date range picker. When sliding the selected time range, the date area of the equipment schedule bugs and …

---

## [Tags disappearing on restart](https://forum.inductiveautomation.com/t/tags-disappearing-on-restart/107865)

<div class="topic-metadata">

**Author:** [@Andrew\_Lin](https://forum.inductiveautomation.com/u/Andrew_Lin)\
**Replies:** 12\
**Last updated:** [September 9, 2026, 5:24pm UTC](https://forum.inductiveautomation.com/t/tags-disappearing-on-restart/107865 "2026-09-09T17:24:52Z")

</div>

So my tags disappeared twice today. I have a bunch of tags within the default tag provider. When my memory utilization hits 90% and everything stalls, the gateway has to restart that's when I notice my tags disappearing…

---

## [Gateway Network 2 Good Connections, 1 with Unknown Gateway Name](https://forum.inductiveautomation.com/t/gateway-network-2-good-connections-1-with-unknown-gateway-name/116987)

<div class="topic-metadata">

**Author:** [@tbennett.tdc](https://forum.inductiveautomation.com/u/tbennett.tdc)\
**Replies:** 5\
**Last updated:** [September 9, 2026, 5:01pm UTC](https://forum.inductiveautomation.com/t/gateway-network-2-good-connections-1-with-unknown-gateway-name/116987 "2026-09-09T17:01:43Z")

</div>

I have 2 Gateways configured with outgoing connections and another to which they are connected. I have a third gateway with an outgoing connection to the same receiving gateway. This third one requests a connection which…

[Previous page](https://forum.inductiveautomation.com/latest.md?page=14)

[Next page](https://forum.inductiveautomation.com/latest.md?page=16)
