# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=243

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 244

---

## [Better to leave serial port open, or open/close as needed?](https://forum.inductiveautomation.com/t/better-to-leave-serial-port-open-or-open-close-as-needed/105793)

<div class="topic-metadata">

**Author:** [@Simon\_Hathout\_Willar](https://forum.inductiveautomation.com/u/Simon_Hathout_Willar)\
**Replies:** 6\
**Last updated:** [May 2, 2025, 6:58pm UTC](https://forum.inductiveautomation.com/t/better-to-leave-serial-port-open-or-open-close-as-needed/105793 "2025-05-02T18:58:39Z")

</div>

I'm using Ignition's serial module to control some lights, using a vision client on a pc to communicate with an Arduino to ultimately send the signal to the light. I was wondering if it was better to open and configu…

---

## [View on different resolution](https://forum.inductiveautomation.com/t/view-on-different-resolution/105756)

<div class="topic-metadata">

**Author:** [@alikhan9347921](https://forum.inductiveautomation.com/u/alikhan9347921)\
**Replies:** 17\
**Last updated:** [May 2, 2025, 6:17pm UTC](https://forum.inductiveautomation.com/t/view-on-different-resolution/105756 "2025-05-02T18:17:42Z")

</div>

Hi, I have an issue , i created a view which looks good on low resolution but when i change it to higher resolution it shrinks. This is how it looks like in higher resolution. This is how it looks like in low reso…

---

## [2 Second Oneshot](https://forum.inductiveautomation.com/t/2-second-oneshot/105704)

<div class="topic-metadata">

**Author:** [@Kishan](https://forum.inductiveautomation.com/u/Kishan)\
**Replies:** 10\
**Last updated:** [May 2, 2025, 4:49pm UTC](https://forum.inductiveautomation.com/t/2-second-oneshot/105704 "2025-05-02T16:49:39Z")

</div>

I am trying to implement a oneshot command where I send a true signal to an OPC tag, maintain it for 2 seconds, then set the signal to false. I've tried many different approaches, including time.sleep(), which I've read …

---

## [Uncertain\_InitialValue on only 1 tag group](https://forum.inductiveautomation.com/t/uncertain-initialvalue-on-only-1-tag-group/105833)

<div class="topic-metadata">

**Author:** [@jparsons](https://forum.inductiveautomation.com/u/jparsons)\
**Replies:** 2\
**Last updated:** [May 2, 2025, 4:43pm UTC](https://forum.inductiveautomation.com/t/uncertain-initialvalue-on-only-1-tag-group/105833 "2025-05-02T16:43:45Z")

</div>

Hello, I am setting up a new Rockwell PLC (ControlLogix V35). I have one tag UDT where some of its values are showing up fine and some of its values are showing up as Uncertain\_InitialValue. This is the only tag that is…

---

## [Windows Headless Server Downloading Ignition](https://forum.inductiveautomation.com/t/windows-headless-server-downloading-ignition/84318)

<div class="topic-metadata">

**Author:** [@Mau89](https://forum.inductiveautomation.com/u/Mau89)\
**Replies:** 5\
**Last updated:** [May 2, 2025, 4:38pm UTC](https://forum.inductiveautomation.com/t/windows-headless-server-downloading-ignition/84318 "2025-05-02T16:38:50Z")

</div>

I am trying to download ignition installare in a windows headless server usigin powershell. but it seems impossible. Any Idea? Invoke-WebRequest -UseBasicParsing -Uri "https://files.inductiveautomation.com/release/ia/8…

---

## [Alarm Table data Perspective](https://forum.inductiveautomation.com/t/alarm-table-data-perspective/105677)

<div class="topic-metadata">

**Author:** [@TechEnlive](https://forum.inductiveautomation.com/u/TechEnlive)\
**Replies:** 2\
**Last updated:** [May 2, 2025, 4:33pm UTC](https://forum.inductiveautomation.com/t/alarm-table-data-perspective/105677 "2025-05-02T16:33:42Z")

</div>

Hi, I have an alarm table. I want to show the three most recent alarms in a textarea in another view. Want to show the Display Path as a row in that textarea. How can I do this? Thanks.

---

## [Ignition reporting not following number format](https://forum.inductiveautomation.com/t/ignition-reporting-not-following-number-format/105832)

<div class="topic-metadata">

**Author:** [@daniel.diaz](https://forum.inductiveautomation.com/u/daniel.diaz)\
**Replies:** 5\
**Last updated:** [May 2, 2025, 4:29pm UTC](https://forum.inductiveautomation.com/t/ignition-reporting-not-following-number-format/105832 "2025-05-02T16:29:38Z")

</div>

Hello, I'm having an issue with Ignition reporting not following my number format for a couple of columns that have floating point values from a database. It seems to not be applying the number format to some of the …

---

## [Making duplicate/similar components through a script](https://forum.inductiveautomation.com/t/making-duplicate-similar-components-through-a-script/105821)

<div class="topic-metadata">

**Author:** [@TheIntern](https://forum.inductiveautomation.com/u/TheIntern)\
**Replies:** 1\
**Last updated:** [May 2, 2025, 3:45pm UTC](https://forum.inductiveautomation.com/t/making-duplicate-similar-components-through-a-script/105821 "2025-05-02T15:45:12Z")

</div>

I am working on a map that has buttons that will lead to a simple form (aka view with text, checkboxes, and submit button), and I would to be able to create new "forms" from another view. So basically type a few things i…

---

## [Perspective Vessel Scaling](https://forum.inductiveautomation.com/t/perspective-vessel-scaling/73108)

<div class="topic-metadata">

**Author:** [@ejaegler](https://forum.inductiveautomation.com/u/ejaegler)\
**Replies:** 2\
**Last updated:** [May 2, 2025, 3:18pm UTC](https://forum.inductiveautomation.com/t/perspective-vessel-scaling/73108 "2025-05-02T15:18:21Z")

</div>

I'm working on a coordinated view and I am attempting to use the Perspective Vessel object (to show level of the tank). I'm trying to expand the size of the vessel where I can have the vessel expand in the open space on…

---

## [What file format are the data.bin files for client tags/general properties/designer props/global props?](https://forum.inductiveautomation.com/t/what-file-format-are-the-data-bin-files-for-client-tags-general-properties-designer-props-global-props/105807)

<div class="topic-metadata">

**Author:** [@Leor\_Fishman](https://forum.inductiveautomation.com/u/Leor_Fishman)\
**Replies:** 1\
**Last updated:** [May 2, 2025, 2:42pm UTC](https://forum.inductiveautomation.com/t/what-file-format-are-the-data-bin-files-for-client-tags-general-properties-designer-props-global-props/105807 "2025-05-02T14:42:35Z")

</div>

Curious, since they don't seem to be gzipped or java serialized EDIT: oh it's gzipped java objects, ok

---

## [Ignition database use from modules](https://forum.inductiveautomation.com/t/ignition-database-use-from-modules/105806)

<div class="topic-metadata">

**Author:** [@David\_Stone](https://forum.inductiveautomation.com/u/David_Stone)\
**Replies:** 2\
**Last updated:** [May 2, 2025, 2:37pm UTC](https://forum.inductiveautomation.com/t/ignition-database-use-from-modules/105806 "2025-05-02T14:37:18Z")

</div>

Is there any examples of modules around that use their own table in an existing Ignition database? Not the SQLite config database, but one of the user defined SQL connections?

---

## [How to : Create chat message and picture upload on Perspective](https://forum.inductiveautomation.com/t/how-to-create-chat-message-and-picture-upload-on-perspective/105814)

<div class="topic-metadata">

**Author:** [@Chumnan\_Tumtong](https://forum.inductiveautomation.com/u/Chumnan_Tumtong)\
**Replies:** 4\
**Last updated:** [May 2, 2025, 1:52pm UTC](https://forum.inductiveautomation.com/t/how-to-create-chat-message-and-picture-upload-on-perspective/105814 "2025-05-02T13:52:38Z")

</div>

Hi all how to : Create chat message and picture upload on perspective !Please sent solution Thank you

---

## [system.tag.readAsync](https://forum.inductiveautomation.com/t/system-tag-readasync/105812)

<div class="topic-metadata">

**Author:** [@Henk](https://forum.inductiveautomation.com/u/Henk)\
**Replies:** 2\
**Last updated:** [May 2, 2025, 1:04pm UTC](https://forum.inductiveautomation.com/t/system-tag-readasync/105812 "2025-05-02T13:04:39Z")

</div>

It seems I can't get de readAsync function working. I tried the following script in script console: def func(values): print( \[qv.value for qv in values\] ) taglist=\['\[System\]Gateway/UptimeSeconds'\] print('a') func( syst…

---

## [Read AB - ControlLogix Boolean Array Tags](https://forum.inductiveautomation.com/t/read-ab-controllogix-boolean-array-tags/105818)

<div class="topic-metadata">

**Author:** [@sharan](https://forum.inductiveautomation.com/u/sharan)\
**Replies:** 1\
**Last updated:** [May 2, 2025, 12:26pm UTC](https://forum.inductiveautomation.com/t/read-ab-controllogix-boolean-array-tags/105818 "2025-05-02T12:26:50Z")

</div>

I am trying to read Boolean array tags from Rockwell - Compactguardlogix PLC.using Logix driver. The tas in plc is ABC\[32\] - Boolean Array. This tag is coming in ignition as ABC\_0\_ , i can directly write interger value…

---

## [Perspective client freezes when Android tablets roam from 2.4 GHz (Wi‑Fi 4) to 5 GHz (Wi‑Fi 5) – any known fix?](https://forum.inductiveautomation.com/t/perspective-client-freezes-when-android-tablets-roam-from-2-4-ghz-wi-fi-4-to-5-ghz-wi-fi-5-any-known-fix/105817)

<div class="topic-metadata">

**Author:** [@Jakub\_Lastovicka](https://forum.inductiveautomation.com/u/Jakub_Lastovicka)\
**Replies:** 2\
**Last updated:** [May 2, 2025, 12:24pm UTC](https://forum.inductiveautomation.com/t/perspective-client-freezes-when-android-tablets-roam-from-2-4-ghz-wi-fi-4-to-5-ghz-wi-fi-5-any-known-fix/105817 "2025-05-02T12:24:50Z")

</div>

Hi all, We’re running Ignition 8.1.39: 60x Android 13 tablets (Zebra CC6000). Project Mainly table / chart views; lots of live tag bindings (heavy WebSocket traffic). Issue: Some tablets that are far enough from one…

---

## [Is it possible to connect Beijer Panel OPC to Ignition?](https://forum.inductiveautomation.com/t/is-it-possible-to-connect-beijer-panel-opc-to-ignition/105683)

<div class="topic-metadata">

**Author:** [@Philip\_Svensson](https://forum.inductiveautomation.com/u/Philip_Svensson)\
**Replies:** 9\
**Last updated:** [May 2, 2025, 12:00pm UTC](https://forum.inductiveautomation.com/t/is-it-possible-to-connect-beijer-panel-opc-to-ignition/105683 "2025-05-02T12:00:44Z")

</div>

Hello, i have a Beijer panel which i run a OPC UA server on and i was wondering if it's possible to connect it to Ignition? I have tried to connect it myself but to no success.

---

## [XY Chart Line Bullets Problems](https://forum.inductiveautomation.com/t/xy-chart-line-bullets-problems/105767)

<div class="topic-metadata">

**Author:** [@thidalgo](https://forum.inductiveautomation.com/u/thidalgo)\
**Replies:** 5\
**Last updated:** [May 2, 2025, 11:51am UTC](https://forum.inductiveautomation.com/t/xy-chart-line-bullets-problems/105767 "2025-05-02T11:51:47Z")

</div>

Hi, I'm having two problems related to line bullets: The first and last bullet are showed cut in half. The tooltip of the last bullet cannot be showed falls outside the screen. ¿How can I solve both ? Thanks.

---

## [Driver Allen-Bradley](https://forum.inductiveautomation.com/t/driver-allen-bradley/74014)

<div class="topic-metadata">

**Author:** [@tecnoeletronic](https://forum.inductiveautomation.com/u/tecnoeletronic)\
**Replies:** 9\
**Last updated:** [May 2, 2025, 10:21am UTC](https://forum.inductiveautomation.com/t/driver-allen-bradley/74014 "2025-05-02T10:21:37Z")

</div>

Hi, i'm trying to read data from an AB PLC (see details on pictures) but without success. Using the "Control Logix Legacy Driver" i cannot connect (Faulted Mode message) Using the "Allen-Bradley Logix Driver" the d…

---

## [Engineering Units from OPC](https://forum.inductiveautomation.com/t/engineering-units-from-opc/105805)

<div class="topic-metadata">

**Author:** [@ethan.vazquez](https://forum.inductiveautomation.com/u/ethan.vazquez)\
**Replies:** 1\
**Last updated:** [May 2, 2025, 12:00am UTC](https://forum.inductiveautomation.com/t/engineering-units-from-opc/105805 "2025-05-02T00:00:08Z")

</div>

Hello all! I'm wondering how best to get custom engineering units from OPC. Our OPC server provides UCUM engineering units and there doesn't seem to be a simple way to link this when I create a new OPC tag. For instance,…

---

## [Remote Alarm Journal Not Logging Alarm Events](https://forum.inductiveautomation.com/t/remote-alarm-journal-not-logging-alarm-events/102264)

<div class="topic-metadata">

**Author:** [@Rohit\_Mehar1](https://forum.inductiveautomation.com/u/Rohit_Mehar1)\
**Replies:** 1\
**Last updated:** [May 1, 2025, 11:45pm UTC](https://forum.inductiveautomation.com/t/remote-alarm-journal-not-logging-alarm-events/102264 "2025-05-01T23:45:22Z")

</div>

I want to see my Remote Gateway(GW01) alarm events on Main Gateway (DEV01). For which, I have created Gateway network which is up and running. I have created Alarm Journal (Database Type) on Main Gateway and I can see …

---

## [Connected to SQL Server Express failied](https://forum.inductiveautomation.com/t/connected-to-sql-server-express-failied/53768)

<div class="topic-metadata">

**Author:** [@Shenyi\_Bao](https://forum.inductiveautomation.com/u/Shenyi_Bao)\
**Replies:** 5\
**Last updated:** [May 1, 2025, 9:15pm UTC](https://forum.inductiveautomation.com/t/connected-to-sql-server-express-failied/53768 "2025-05-01T21:15:11Z")

</div>

Hello, I am a developer of Oasys HMI developer and like to expend my career to ignition. I download software and try it out on my windows 10 first time. I got following error after installed JRE, copied unzipped JDBC d…

---

## [Sudden gmail SMTP authentication Error](https://forum.inductiveautomation.com/t/sudden-gmail-smtp-authentication-error/105775)

<div class="topic-metadata">

**Author:** [@mattn1](https://forum.inductiveautomation.com/u/mattn1)\
**Replies:** 3\
**Last updated:** [May 1, 2025, 9:11pm UTC](https://forum.inductiveautomation.com/t/sudden-gmail-smtp-authentication-error/105775 "2025-05-01T21:11:01Z")

</div>

I have several customers using a gmail email server. They have been on the server for years. I have confirmed that 2 step verification login is disabled and less secure apps are enabled. Password is the same as i…

---

## [Custom Tag History Provider](https://forum.inductiveautomation.com/t/custom-tag-history-provider/105797)

<div class="topic-metadata">

**Author:** [@andrew.jank](https://forum.inductiveautomation.com/u/andrew.jank)\
**Replies:** 0\
**Last updated:** [May 1, 2025, 7:59pm UTC](https://forum.inductiveautomation.com/t/custom-tag-history-provider/105797 "2025-05-01T19:59:13Z")

</div>

Hey Everyone, I have started developing an Ignition module to read/write values using our in-house historian. I was able to get most of it running using the following example: GitHub - IgnitionModuleDevelopmentCommuni…

---

## [Perspective Workstation - fullscreen actions with multiple monitors](https://forum.inductiveautomation.com/t/perspective-workstation-fullscreen-actions-with-multiple-monitors/105522)

<div class="topic-metadata">

**Author:** [@Jeff\_Krol](https://forum.inductiveautomation.com/u/Jeff_Krol)\
**Replies:** 3\
**Last updated:** [May 1, 2025, 7:33pm UTC](https://forum.inductiveautomation.com/t/perspective-workstation-fullscreen-actions-with-multiple-monitors/105522 "2025-05-01T19:33:40Z")

</div>

Hello, Our plants have three monitors connected to their workstation. Two of those monitors are used as process control interfaces and the third one is a status display out on the plant floor. The third display runs one…

---

## [Flow Totalizer on 15 min increments](https://forum.inductiveautomation.com/t/flow-totalizer-on-15-min-increments/105791)

<div class="topic-metadata">

**Author:** [@Zachary\_Kacel1](https://forum.inductiveautomation.com/u/Zachary_Kacel1)\
**Replies:** 4\
**Last updated:** [May 1, 2025, 6:53pm UTC](https://forum.inductiveautomation.com/t/flow-totalizer-on-15-min-increments/105791 "2025-05-01T18:53:50Z")

</div>

I am trying to build a totalizer I have never built one before. Engineering only needs 15min resolution so I am summing up the GAL used every 15min then incrementing a counter to trigger ignition to save the value to SQ…

---

## [Dataset & daylight saving](https://forum.inductiveautomation.com/t/dataset-daylight-saving/105794)

<div class="topic-metadata">

**Author:** [@Giuseppe\_Giammo](https://forum.inductiveautomation.com/u/Giuseppe_Giammo)\
**Replies:** 0\
**Last updated:** [May 1, 2025, 6:23pm UTC](https://forum.inductiveautomation.com/t/dataset-daylight-saving/105794 "2025-05-01T18:23:10Z")

</div>

Hi everyone. I am observing a very strange behavior with data sets for charts. look at the image below.. the system is advancing the daylight saving time creating duplicate . The strange thing is that the original q…

---

## [Publish Edge to a specific coordinate](https://forum.inductiveautomation.com/t/publish-edge-to-a-specific-coordinate/105426)

<div class="topic-metadata">

**Author:** [@automation](https://forum.inductiveautomation.com/u/automation)\
**Replies:** 6\
**Last updated:** [May 1, 2025, 6:19pm UTC](https://forum.inductiveautomation.com/t/publish-edge-to-a-specific-coordinate/105426 "2025-05-01T18:19:28Z")

</div>

Hi there, I have multiple monitors and I need to run an edge application at specific monitor coordinate. Is that possible? If so, could you help out? Thanks, Musab

---

## [Is there a way to have Tag History insert into a specific table instead of creating its own?](https://forum.inductiveautomation.com/t/is-there-a-way-to-have-tag-history-insert-into-a-specific-table-instead-of-creating-its-own/105743)

<div class="topic-metadata">

**Author:** [@kraigen94](https://forum.inductiveautomation.com/u/kraigen94)\
**Replies:** 9\
**Last updated:** [May 1, 2025, 6:17pm UTC](https://forum.inductiveautomation.com/t/is-there-a-way-to-have-tag-history-insert-into-a-specific-table-instead-of-creating-its-own/105743 "2025-05-01T18:17:19Z")

</div>

I have a value I want to historize, however, I want to be able to insert the value into a previously created table on my db, instead of having it create a new table. If this is not possible, is there a way to change the …

---

## [Change password of a user since Vision Client](https://forum.inductiveautomation.com/t/change-password-of-a-user-since-vision-client/105729)

<div class="topic-metadata">

**Author:** [@kennethandrad](https://forum.inductiveautomation.com/u/kennethandrad)\
**Replies:** 2\
**Last updated:** [May 1, 2025, 5:34pm UTC](https://forum.inductiveautomation.com/t/change-password-of-a-user-since-vision-client/105729 "2025-05-01T17:34:05Z")

</div>

Hi, is there any form to change the password with my actual password in vision client? Something like this ? userSource = "default" username = system.security.getUsername() oldPassword = event.source.parent.getCompon…

---

## [Transform Map Expression Not working properly](https://forum.inductiveautomation.com/t/transform-map-expression-not-working-properly/105780)

<div class="topic-metadata">

**Author:** [@Paulo\_Custodio](https://forum.inductiveautomation.com/u/Paulo_Custodio)\
**Replies:** 4\
**Last updated:** [May 1, 2025, 5:20pm UTC](https://forum.inductiveautomation.com/t/transform-map-expression-not-working-properly/105780 "2025-05-01T17:20:40Z")

</div>

Can anyone help me here? Wasn't this supposed to return red instead of black?

[Previous page](https://forum.inductiveautomation.com/latest.md?page=242)

[Next page](https://forum.inductiveautomation.com/latest.md?page=244)
