# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=256

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 257

---

## [Perspective Audio component](https://forum.inductiveautomation.com/t/perspective-audio-component/62558)

<div class="topic-metadata">

**Author:** [@bwirth](https://forum.inductiveautomation.com/u/bwirth)\
**Replies:** 39\
**Last updated:** [April 10, 2025, 3:27am UTC](https://forum.inductiveautomation.com/t/perspective-audio-component/62558 "2025-04-10T03:27:30Z")

</div>

Looking through the file compatibilities for the Perspective Audio component, I don’t see compatibility for .wav files. I’m assuming wav is not supported. Also, which browser compatibility would I use for Perspective Wo…

---

## [Button Enabled Property Bug](https://forum.inductiveautomation.com/t/button-enabled-property-bug/104928)

<div class="topic-metadata">

**Author:** [@Alaa\_Soulaiman](https://forum.inductiveautomation.com/u/Alaa_Soulaiman)\
**Replies:** 2\
**Last updated:** [April 10, 2025, 1:20am UTC](https://forum.inductiveautomation.com/t/button-enabled-property-bug/104928 "2025-04-10T01:20:20Z")

</div>

Hello All, I have a push button that does the following: if button enable property is set to true, pressing the button sets a bit to 1 that is binded to an indirect tag which is to send to the plc. if button is disabl…

---

## [Gateway Network Load Balancing](https://forum.inductiveautomation.com/t/gateway-network-load-balancing/104906)

<div class="topic-metadata">

**Author:** [@Leor\_Fishman](https://forum.inductiveautomation.com/u/Leor_Fishman)\
**Replies:** 10\
**Last updated:** [April 10, 2025, 12:45am UTC](https://forum.inductiveautomation.com/t/gateway-network-load-balancing/104906 "2025-04-10T00:45:01Z")

</div>

Gateway Network question: if I have 2 gateways, A and B, that are cloned from a gateway backup and have the same name, UUID, and cert keystore, if I put them behind a load balancer (such that gateway A receives requests …

---

## [OPC Connection Data Types](https://forum.inductiveautomation.com/t/opc-connection-data-types/104333)

<div class="topic-metadata">

**Author:** [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Replies:** 16\
**Last updated:** [April 9, 2025, 11:49pm UTC](https://forum.inductiveautomation.com/t/opc-connection-data-types/104333 "2025-04-09T23:49:23Z")

</div>

I've noticed that OPC connections in v8.3 will not coerce java Long values (from jython int) to any unsigned OPC UA types, like UInt32. Is this deliberate? W \[c.i.i.g.o.c.c.OpcUaConnection \] \[20:20:00.647\]: write faile…

---

## [Configuration of Alarm Journal](https://forum.inductiveautomation.com/t/configuration-of-alarm-journal/94304)

<div class="topic-metadata">

**Author:** [@spm](https://forum.inductiveautomation.com/u/spm)\
**Replies:** 15\
**Last updated:** [April 9, 2025, 9:59pm UTC](https://forum.inductiveautomation.com/t/configuration-of-alarm-journal/94304 "2025-04-09T21:59:54Z")

</div>

Hello, I have a couple of customers on my Ignition 8.1 system. I have a separate database for each customer, so for alarms, I setup separate alarm journals for each customer. I used the Source field to only put alarms…

---

## [Scanner: Zebra Scanner using Perspective App](https://forum.inductiveautomation.com/t/scanner-zebra-scanner-using-perspective-app/99461)

<div class="topic-metadata">

**Author:** [@Rohit\_Mehar1](https://forum.inductiveautomation.com/u/Rohit_Mehar1)\
**Replies:** 12\
**Last updated:** [April 9, 2025, 9:57pm UTC](https://forum.inductiveautomation.com/t/scanner-zebra-scanner-using-perspective-app/99461 "2025-04-09T21:57:25Z")

</div>

I am going to use Zebra Scanner (TC26AK-21A222-) in my project. As its android one, will install Perspective app for Scanning application. Zebra scanner doesn't have inbuilt camera so I will not be able to use Perspecti…

---

## [Ignition to EtherNet/IP without a PLC](https://forum.inductiveautomation.com/t/ignition-to-ethernet-ip-without-a-plc/26536)

<div class="topic-metadata">

**Author:** [@rzrbacks](https://forum.inductiveautomation.com/u/rzrbacks)\
**Replies:** 20\
**Last updated:** [April 9, 2025, 9:57pm UTC](https://forum.inductiveautomation.com/t/ignition-to-ethernet-ip-without-a-plc/26536 "2025-04-09T21:57:00Z")

</div>

Is it possible for Ignition to talk directly to a device that talks EtherNet/IP without a PLC in between? Kepware or some other software/hardware?

---

## [AD/Internal Hybrid User contact info not updating from AD](https://forum.inductiveautomation.com/t/ad-internal-hybrid-user-contact-info-not-updating-from-ad/95892)

<div class="topic-metadata">

**Author:** [@DavidO](https://forum.inductiveautomation.com/u/DavidO)\
**Replies:** 10\
**Last updated:** [April 9, 2025, 8:39pm UTC](https://forum.inductiveautomation.com/t/ad-internal-hybrid-user-contact-info-not-updating-from-ad/95892 "2025-04-09T20:39:13Z")

</div>

Need some help on AD/Internal Hybrid user source. I cannot get some user source contact info to update from AD. The users SMS-nr is used to send SMS-alarms so it is vital that updating in the AD takes effect in the Use…

---

## [Error MessageHandlerManager is null in ScriptConfig!](https://forum.inductiveautomation.com/t/error-messagehandlermanager-is-null-in-scriptconfig/104920)

<div class="topic-metadata">

**Author:** [@mazeyrat](https://forum.inductiveautomation.com/u/mazeyrat)\
**Replies:** 4\
**Last updated:** [April 9, 2025, 7:59pm UTC](https://forum.inductiveautomation.com/t/error-messagehandlermanager-is-null-in-scriptconfig/104920 "2025-04-09T19:59:03Z")

</div>

I have a module with a ProjectListener. on Project update I send a gateway message handled by a gateway script message handler @Override public void projectUpdated(String project) { if (enabled && filterProjectUpdated…

---

## [ApexCharts Legend Coloring](https://forum.inductiveautomation.com/t/apexcharts-legend-coloring/104922)

<div class="topic-metadata">

**Author:** [@richhull](https://forum.inductiveautomation.com/u/richhull)\
**Replies:** 0\
**Last updated:** [April 9, 2025, 7:32pm UTC](https://forum.inductiveautomation.com/t/apexcharts-legend-coloring/104922 "2025-04-09T19:32:56Z")

</div>

I originally had my legend working where I had a split color for one of the values. However, since I switched to the newer version 1.0.22, I have been un able to achieve the same results. I originally accomplished this u…

---

## [Max Tags Per Tag Group?](https://forum.inductiveautomation.com/t/max-tags-per-tag-group/104767)

<div class="topic-metadata">

**Author:** [@Yangorang](https://forum.inductiveautomation.com/u/Yangorang)\
**Replies:** 14\
**Last updated:** [April 9, 2025, 6:46pm UTC](https://forum.inductiveautomation.com/t/max-tags-per-tag-group/104767 "2025-04-09T18:46:02Z")

</div>

Is there any sort of known upper limit for the maximum number of tags you can assign to a single tag group? The system integrator onsite is saying that with a 3s poll rate and some 30k+ tags assigned to a single tag gro…

---

## [Interesting finds in pylib, but how to use?](https://forum.inductiveautomation.com/t/interesting-finds-in-pylib-but-how-to-use/104912)

<div class="topic-metadata">

**Author:** [@slacasse1](https://forum.inductiveautomation.com/u/slacasse1)\
**Replies:** 4\
**Last updated:** [April 9, 2025, 5:12pm UTC](https://forum.inductiveautomation.com/t/interesting-finds-in-pylib-but-how-to-use/104912 "2025-04-09T17:12:34Z")

</div>

Hello, As I was exploring user-lib/pylib, I've seen SocketServer.py containing classes to build a simple server. So I was thinking, maybe it's possible to send network messages (or commands), but I'm not sure how this …

---

## [Report with Script Datasource that takes a long time to run](https://forum.inductiveautomation.com/t/report-with-script-datasource-that-takes-a-long-time-to-run/104803)

<div class="topic-metadata">

**Author:** [@downerczx](https://forum.inductiveautomation.com/u/downerczx)\
**Replies:** 4\
**Last updated:** [April 9, 2025, 4:39pm UTC](https://forum.inductiveautomation.com/t/report-with-script-datasource-that-takes-a-long-time-to-run/104803 "2025-04-09T16:39:03Z")

</div>

I have a report with a script datasource. The script can take up to 15 minutes to run. It times out the reporting engine. Is there a way to let the report module just let the script finish before panicking and abandoning…

---

## [Connecting a Allen Bradley Micro850 to Ignition 7.9.9](https://forum.inductiveautomation.com/t/connecting-a-allen-bradley-micro850-to-ignition-7-9-9/104911)

<div class="topic-metadata">

**Author:** [@jhenderson](https://forum.inductiveautomation.com/u/jhenderson)\
**Replies:** 1\
**Last updated:** [April 9, 2025, 4:26pm UTC](https://forum.inductiveautomation.com/t/connecting-a-allen-bradley-micro850-to-ignition-7-9-9/104911 "2025-04-09T16:26:00Z")

</div>

Needing to connect a Allen Bradley Micro850. I know that in Ignition 8.1.39 has a module for it but the current Ignition version is 7.9.9 and not sure they are willing to get it updated to the latest version. Looking f…

---

## [system.tag.queryTagHistory - Ignoring bad values & needing last known value](https://forum.inductiveautomation.com/t/system-tag-querytaghistory-ignoring-bad-values-needing-last-known-value/104909)

<div class="topic-metadata">

**Author:** [@r123](https://forum.inductiveautomation.com/u/r123)\
**Replies:** 0\
**Last updated:** [April 9, 2025, 4:20pm UTC](https://forum.inductiveautomation.com/t/system-tag-querytaghistory-ignoring-bad-values-needing-last-known-value/104909 "2025-04-09T16:20:09Z")

</div>

We don't want the values with bad quality to be added to the chunk\_history. We also need to return a value for all tags even if it's the last known value outside the start and end dates. We use includeBoundingValues=True …

---

## [Rockwell PLC5 OSS Driver - protocols](https://forum.inductiveautomation.com/t/rockwell-plc5-oss-driver-protocols/104883)

<div class="topic-metadata">

**Author:** [@Jakub\_Zwolinski](https://forum.inductiveautomation.com/u/Jakub_Zwolinski)\
**Replies:** 8\
**Last updated:** [April 9, 2025, 4:14pm UTC](https://forum.inductiveautomation.com/t/rockwell-plc5-oss-driver-protocols/104883 "2025-04-09T16:14:14Z")

</div>

Hello! I am using Rockwell PLC5, Ignition and Tofino firewall. I have unlocked ports 44818 and 2222 but communication is not going.. when i reset firewall to defaults - it is going.. The driver gets locked on - determin…

---

## [Creating a button to be disabled based on a bool value?](https://forum.inductiveautomation.com/t/creating-a-button-to-be-disabled-based-on-a-bool-value/104894)

<div class="topic-metadata">

**Author:** [@sergio\_valencia](https://forum.inductiveautomation.com/u/sergio_valencia)\
**Replies:** 5\
**Last updated:** [April 9, 2025, 3:59pm UTC](https://forum.inductiveautomation.com/t/creating-a-button-to-be-disabled-based-on-a-bool-value/104894 "2025-04-09T15:59:17Z")

</div>

This button is to a Pop Up Window. I would like for this to be disabled if a bool value = 0 and enabled if that same bool value = 1 The problem is the button always enables the Pop Up Window no matter the bools status..…

---

## [Custom Datasets Efficiency](https://forum.inductiveautomation.com/t/custom-datasets-efficiency/104899)

<div class="topic-metadata">

**Author:** [@arice](https://forum.inductiveautomation.com/u/arice)\
**Replies:** 6\
**Last updated:** [April 9, 2025, 3:57pm UTC](https://forum.inductiveautomation.com/t/custom-datasets-efficiency/104899 "2025-04-09T15:57:37Z")

</div>

I am curious as to the most efficient way to accomplish creating a custom dataset created from a UDT that comes from OPC. Currently I have created this script in a project library: def createTable(dryer\_data): # Renam…

---

## [Ignition Storage Usage Alarm Alerts](https://forum.inductiveautomation.com/t/ignition-storage-usage-alarm-alerts/104896)

<div class="topic-metadata">

**Author:** [@Randolph\_Sewell](https://forum.inductiveautomation.com/u/Randolph_Sewell)\
**Replies:** 1\
**Last updated:** [April 9, 2025, 2:38pm UTC](https://forum.inductiveautomation.com/t/ignition-storage-usage-alarm-alerts/104896 "2025-04-09T14:38:54Z")

</div>

We would like to receive alerts when the disk usage on the ignition gateway reaches a certain point and when the store and forward cache starts getting full. Does anyone have any ideas on how this can be achieved? I was …

---

## [Fixed Column Layout in Flex Repeater Across All Viewports in Ignition Perspective](https://forum.inductiveautomation.com/t/fixed-column-layout-in-flex-repeater-across-all-viewports-in-ignition-perspective/104817)

<div class="topic-metadata">

**Author:** [@ARIFRAHUMAN\_A](https://forum.inductiveautomation.com/u/ARIFRAHUMAN_A)\
**Replies:** 6\
**Last updated:** [April 9, 2025, 2:15pm UTC](https://forum.inductiveautomation.com/t/fixed-column-layout-in-flex-repeater-across-all-viewports-in-ignition-perspective/104817 "2025-04-09T14:15:59Z")

</div>

I am using a Flex Repeater in Ignition Perspective. Inside it, I dynamically pass the instances and set the mode to wrap. I was able to adjust the horizontal (width) gap, but I'm having trouble adjusting the vertical (…

---

## [Named Query Description metadata missing](https://forum.inductiveautomation.com/t/named-query-description-metadata-missing/77311)

<div class="topic-metadata">

**Author:** [@drojas](https://forum.inductiveautomation.com/u/drojas)\
**Replies:** 6\
**Last updated:** [April 9, 2025, 2:07pm UTC](https://forum.inductiveautomation.com/t/named-query-description-metadata-missing/77311 "2025-04-09T14:07:11Z")

</div>

Does anyone know where or why the "Description" section is missing from newer updates of Ignition? Seems helpful since sometimes in-line comments in the actual SQL Query doesn't always work. This is 8.1.3 This is 8…

---

## [Allen Bradley 1783-NATR, Network Address Translation Router](https://forum.inductiveautomation.com/t/allen-bradley-1783-natr-network-address-translation-router/14515)

<div class="topic-metadata">

**Author:** [@andrea.minu](https://forum.inductiveautomation.com/u/andrea.minu)\
**Replies:** 8\
**Last updated:** [April 9, 2025, 2:01pm UTC](https://forum.inductiveautomation.com/t/allen-bradley-1783-natr-network-address-translation-router/14515 "2025-04-09T14:01:33Z")

</div>

Hello Has anyone connected Ignition a Allen Bradley PLC ( SLC and Controllogix) using a 1783-NATR I have between Ignition and PLC the 1783-NATR, it is correctly configurated , I can ping the PLCs and I can connect to…

---

## [Connecting PLC to Ignition through 1783-NATR](https://forum.inductiveautomation.com/t/connecting-plc-to-ignition-through-1783-natr/97027)

<div class="topic-metadata">

**Author:** [@Zachary\_Guess](https://forum.inductiveautomation.com/u/Zachary_Guess)\
**Replies:** 7\
**Last updated:** [April 9, 2025, 1:57pm UTC](https://forum.inductiveautomation.com/t/connecting-plc-to-ignition-through-1783-natr/97027 "2025-04-09T13:57:39Z")

</div>

Attempting to connect a PLC (192.168.0.1) to Ignition through a 1783-NATR using a rule. The Rule has public IP address of 172.29.1.81 to private IP address 192.168.0.1. I'm able to connect but I'm not seeing the normal o…

---

## [Ignition Gateway Internal Error](https://forum.inductiveautomation.com/t/ignition-gateway-internal-error/58614)

<div class="topic-metadata">

**Author:** [@vinayakulhas.m](https://forum.inductiveautomation.com/u/vinayakulhas.m)\
**Replies:** 5\
**Last updated:** [April 9, 2025, 1:45pm UTC](https://forum.inductiveautomation.com/t/ignition-gateway-internal-error/58614 "2025-04-09T13:45:53Z")

</div>

Hi, I installed the batch procedure module. The status says “New” (Neither faulted nor running ). Tried to restart the module but it goes into error. Any solution to this? Log from Wrapper below INFO | jvm 1 |…

---

## [Siemens OPC-UA or Ignition Siemens Driver with direct addressing?](https://forum.inductiveautomation.com/t/siemens-opc-ua-or-ignition-siemens-driver-with-direct-addressing/59938)

<div class="topic-metadata">

**Author:** [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Replies:** 17\
**Last updated:** [April 9, 2025, 1:33pm UTC](https://forum.inductiveautomation.com/t/siemens-opc-ua-or-ignition-siemens-driver-with-direct-addressing/59938 "2025-04-09T13:33:06Z")

</div>

I’m asking for a colleague, but also interested in the answer. We have a new greenfield project using Siemens PLCs and I’m wondering which way to go in terms of comms to them in Ignition. Should we use the onboard OPC-…

---

## [Using Badging to Switch Users in Vision](https://forum.inductiveautomation.com/t/using-badging-to-switch-users-in-vision/104807)

<div class="topic-metadata">

**Author:** [@Mark\_Flaugh](https://forum.inductiveautomation.com/u/Mark_Flaugh)\
**Replies:** 3\
**Last updated:** [April 9, 2025, 1:10pm UTC](https://forum.inductiveautomation.com/t/using-badging-to-switch-users-in-vision/104807 "2025-04-09T13:10:30Z")

</div>

I am looking to switch users during runtime preferably with badging. The RFID badge reader is currently setup to be a keyboard wedge, which I could use as the entry to a password field to obscure the characters. Howeve…

---

## [Switching Users or Elevating Roles using Identity Providers with Vision](https://forum.inductiveautomation.com/t/switching-users-or-elevating-roles-using-identity-providers-with-vision/79426)

<div class="topic-metadata">

**Author:** [@dbailey](https://forum.inductiveautomation.com/u/dbailey)\
**Replies:** 1\
**Last updated:** [April 9, 2025, 12:57pm UTC](https://forum.inductiveautomation.com/t/switching-users-or-elevating-roles-using-identity-providers-with-vision/79426 "2025-04-09T12:57:38Z")

</div>

I am working on an application that wants to be able to use badge readers, along with Active Directory (DB Hybrid). As I understand, Ignition needs to use the database + Identity Provider authentication method for badge…

---

## [\<user\_function\>.func\_code exists for user Python functions but not IA functions from \`system\`?](https://forum.inductiveautomation.com/t/user-function-func-code-exists-for-user-python-functions-but-not-ia-functions-from-system/104879)

<div class="topic-metadata">

**Author:** [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Replies:** 1\
**Last updated:** [April 9, 2025, 12:03pm UTC](https://forum.inductiveautomation.com/t/user-function-func-code-exists-for-user-python-functions-but-not-ia-functions-from-system/104879 "2025-04-09T12:03:18Z")

</div>

I recently discovered that I can get the module path to a user function by using Java's func\_code (e.g. shared.user\_function\_name.func\_code.co\_filename \>\> \<module:shared.user\_function\_name\>), however when I tried this on…

---

## [Template repeater not passing parameters to popup](https://forum.inductiveautomation.com/t/template-repeater-not-passing-parameters-to-popup/104031)

<div class="topic-metadata">

**Author:** [@GaryL](https://forum.inductiveautomation.com/u/GaryL)\
**Replies:** 2\
**Last updated:** [April 9, 2025, 11:02am UTC](https://forum.inductiveautomation.com/t/template-repeater-not-passing-parameters-to-popup/104031 "2025-04-09T11:02:02Z")

</div>

Hello, im attempting to pass the parameters from a template repeater using dataset mode into a popup however it seems that none of the custom properties are being passed from the repeater template on click into the popup…

---

## [Group more images](https://forum.inductiveautomation.com/t/group-more-images/104887)

<div class="topic-metadata">

**Author:** [@TechEnlive](https://forum.inductiveautomation.com/u/TechEnlive)\
**Replies:** 3\
**Last updated:** [April 9, 2025, 9:24am UTC](https://forum.inductiveautomation.com/t/group-more-images/104887 "2025-04-09T09:24:49Z")

</div>

Hi, I have two images and i want to group them all as a single image. How can I do this? perspective

[Previous page](https://forum.inductiveautomation.com/latest.md?page=255)

[Next page](https://forum.inductiveautomation.com/latest.md?page=257)
