# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=262

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 263

---

## [Modbus TCP Socket Connection Closed, DriverState was Connected](https://forum.inductiveautomation.com/t/modbus-tcp-socket-connection-closed-driverstate-was-connected/104592)

<div class="topic-metadata">

**Author:** [@Sanjiv\_Anto](https://forum.inductiveautomation.com/u/Sanjiv_Anto)\
**Replies:** 2\
**Last updated:** [April 2, 2025, 5:00pm UTC](https://forum.inductiveautomation.com/t/modbus-tcp-socket-connection-closed-driverstate-was-connected/104592 "2025-04-02T17:00:23Z")

</div>

I have an Ignition v8.1.1 system that has been running smoothly for the past few years. This morning, customer reported that none of the tags are connected to the PLC. Upon chceking, I found that the device appears to be…

---

## [What's the guidlines for when to use a flex and when to use coordinate](https://forum.inductiveautomation.com/t/whats-the-guidlines-for-when-to-use-a-flex-and-when-to-use-coordinate/39879)

<div class="topic-metadata">

**Author:** [@codersmurf](https://forum.inductiveautomation.com/u/codersmurf)\
**Replies:** 16\
**Last updated:** [April 2, 2025, 4:56pm UTC](https://forum.inductiveautomation.com/t/whats-the-guidlines-for-when-to-use-a-flex-and-when-to-use-coordinate/39879 "2025-04-02T16:56:24Z")

</div>

I’m probably just using them wrong, but when is it appropriate to use flex and coordinate views with an interface that will be used for both mobile and desktop? I have weird issues where the flex views stretch and such …

---

## [Un-Acknowledged alarm question](https://forum.inductiveautomation.com/t/un-acknowledged-alarm-question/104554)

<div class="topic-metadata">

**Author:** [@josborn](https://forum.inductiveautomation.com/u/josborn)\
**Replies:** 5\
**Last updated:** [April 2, 2025, 4:41pm UTC](https://forum.inductiveautomation.com/t/un-acknowledged-alarm-question/104554 "2025-04-02T16:41:00Z")

</div>

I am working on a conversion from an old RsView project where they have some tags that are alarmed, but they also have an "acknowledge" tag that only gets set back to False once the corresponding alarm has been acknowled…

---

## [Alarms: Strange behavior when activating/clearing](https://forum.inductiveautomation.com/t/alarms-strange-behavior-when-activating-clearing/104468)

<div class="topic-metadata">

**Author:** [@Brian\_Stilson](https://forum.inductiveautomation.com/u/Brian_Stilson)\
**Replies:** 2\
**Last updated:** [April 2, 2025, 4:37pm UTC](https://forum.inductiveautomation.com/t/alarms-strange-behavior-when-activating-clearing/104468 "2025-04-02T16:37:46Z")

</div>

I have a bunch of alarms set up on a Gateway. On my alarm history table, I'm seeing some unexpected results whenever I activate an alarm to test it out: What's happening is I toggle the alarm bit on. When that happen…

---

## [amCharts to Perspective XYChart Properties Reference](https://forum.inductiveautomation.com/t/amcharts-to-perspective-xychart-properties-reference/104596)

<div class="topic-metadata">

**Author:** [@Richard\_Foley](https://forum.inductiveautomation.com/u/Richard_Foley)\
**Replies:** 0\
**Last updated:** [April 2, 2025, 4:18pm UTC](https://forum.inductiveautomation.com/t/amcharts-to-perspective-xychart-properties-reference/104596 "2025-04-02T16:18:08Z")

</div>

I've found myself needing more control of the built-in charts and have read in other threads that the charts in Perspective are from the amCharts library. My current issue is trying to turn off the text in a horizontal …

---

## [Direct Modbus Write/Reads (HC900)](https://forum.inductiveautomation.com/t/direct-modbus-write-reads-hc900/104589)

<div class="topic-metadata">

**Author:** [@jacob.leonard](https://forum.inductiveautomation.com/u/jacob.leonard)\
**Replies:** 1\
**Last updated:** [April 2, 2025, 3:02pm UTC](https://forum.inductiveautomation.com/t/direct-modbus-write-reads-hc900/104589 "2025-04-02T15:02:52Z")

</div>

TLDR: I want to make direct Modbus Writes/Reads without using tags. Is this possible through scripting? Details: Using a Honeywell HC900-C50 Furnace Controller, I would like to be able to download new heat treat profi…

---

## [How to access individual bits of a ControlLogix DINT in Tag Browser?](https://forum.inductiveautomation.com/t/how-to-access-individual-bits-of-a-controllogix-dint-in-tag-browser/104541)

<div class="topic-metadata">

**Author:** [@tracy.mckeown](https://forum.inductiveautomation.com/u/tracy.mckeown)\
**Replies:** 5\
**Last updated:** [April 2, 2025, 2:41pm UTC](https://forum.inductiveautomation.com/t/how-to-access-individual-bits-of-a-controllogix-dint-in-tag-browser/104541 "2025-04-02T14:41:40Z")

</div>

I have 26 DINT tags in my Controllogix PLC (832) induvial bits. Each bit represents a possible fault condition thus the use of the DINT to reduce number of tags to be created. In tag browser of Ignition I cannot see to…

---

## [My project is laddle tracking system in simense s7 1200 but i need this project in ignition](https://forum.inductiveautomation.com/t/my-project-is-laddle-tracking-system-in-simense-s7-1200-but-i-need-this-project-in-ignition/104587)

<div class="topic-metadata">

**Author:** [@akshaydate](https://forum.inductiveautomation.com/u/akshaydate)\
**Replies:** 1\
**Last updated:** [April 2, 2025, 2:31pm UTC](https://forum.inductiveautomation.com/t/my-project-is-laddle-tracking-system-in-simense-s7-1200-but-i-need-this-project-in-ignition/104587 "2025-04-02T14:31:08Z")

</div>

My project is laddle tracking system in simense s7 1200 but i need this project in ignition

---

## [Question about Ignition 8.3 Alarm Properties](https://forum.inductiveautomation.com/t/question-about-ignition-8-3-alarm-properties/104511)

<div class="topic-metadata">

**Author:** [@Steve\_Laubach](https://forum.inductiveautomation.com/u/Steve_Laubach)\
**Replies:** 8\
**Last updated:** [April 2, 2025, 2:28pm UTC](https://forum.inductiveautomation.com/t/question-about-ignition-8-3-alarm-properties/104511 "2025-04-02T14:28:16Z")

</div>

I understand that there will be new properties on folders that tell you information about alarms within a folder. Does this allow us to totalize active alarms by priority and acknowledge state? I'm working on a system …

---

## [Perspective Power Chart Pen Table Height](https://forum.inductiveautomation.com/t/perspective-power-chart-pen-table-height/50647)

<div class="topic-metadata">

**Author:** [@nicholas.robinson](https://forum.inductiveautomation.com/u/nicholas.robinson)\
**Replies:** 9\
**Last updated:** [April 2, 2025, 2:26pm UTC](https://forum.inductiveautomation.com/t/perspective-power-chart-pen-table-height/50647 "2025-04-02T14:26:14Z")

</div>

When using the perspective power chart, is there any way to give the the pen table more room so that scroll bars don’t appear? There are 4 pens but no matter how tall I make the view, it always makes me scroll down to s…

---

## [Designer doesn't update resource documentation field when importing](https://forum.inductiveautomation.com/t/designer-doesnt-update-resource-documentation-field-when-importing/104528)

<div class="topic-metadata">

**Author:** [@RLmason](https://forum.inductiveautomation.com/u/RLmason)\
**Replies:** 2\
**Last updated:** [April 2, 2025, 2:24pm UTC](https://forum.inductiveautomation.com/t/designer-doesnt-update-resource-documentation-field-when-importing/104528 "2025-04-02T14:24:23Z")

</div>

When importing a resource from a file, e.g., a Vision window, Designer doesn't update the "resource documentation" field during the save. Although the resource.json "Documentation" value matches the imported resource, De…

---

## [XY Chart doesn't clear dataset](https://forum.inductiveautomation.com/t/xy-chart-doesnt-clear-dataset/49474)

<div class="topic-metadata">

**Author:** [@tim.schultz](https://forum.inductiveautomation.com/u/tim.schultz)\
**Replies:** 17\
**Last updated:** [April 2, 2025, 1:23pm UTC](https://forum.inductiveautomation.com/t/xy-chart-doesnt-clear-dataset/49474 "2025-04-02T13:23:52Z")

</div>

Using Ignition 8.1.7, in Perspective. I'm using an XY chart with a dataset bound to a named query that refreshes every 10 seconds. After a couple of refreshes, my chart looks wonky: Any suggestions?

---

## [Vision Dropdown Dynamic Update](https://forum.inductiveautomation.com/t/vision-dropdown-dynamic-update/104582)

<div class="topic-metadata">

**Author:** [@Mitchell\_Gerber](https://forum.inductiveautomation.com/u/Mitchell_Gerber)\
**Replies:** 1\
**Last updated:** [April 2, 2025, 11:58am UTC](https://forum.inductiveautomation.com/t/vision-dropdown-dynamic-update/104582 "2025-04-02T11:58:55Z")

</div>

Is there a way for the operator to add a row to the dropdown while the program is running? I had an operator request this because as of now they have to come to an engineer to get the dropdown list updated. Thanks!

---

## [Read data from TCP Printer](https://forum.inductiveautomation.com/t/read-data-from-tcp-printer/104583)

<div class="topic-metadata">

**Author:** [@Dharani\_T](https://forum.inductiveautomation.com/u/Dharani_T)\
**Replies:** 2\
**Last updated:** [April 2, 2025, 11:50am UTC](https://forum.inductiveautomation.com/t/read-data-from-tcp-printer/104583 "2025-04-02T11:50:35Z")

</div>

Hi, I am trying to read data from a TCP-connected printer. The connection has been verified using PowerShell, and the printer is reachable. However, when attempting to communicate via Python or from Ignition, the connec…

---

## [\[Bug-13619\] View crashing - 'Unable to deserialize resource'](https://forum.inductiveautomation.com/t/bug-13619-view-crashing-unable-to-deserialize-resource/24241)

<div class="topic-metadata">

**Author:** [@alan\_pereira](https://forum.inductiveautomation.com/u/alan_pereira)\
**Replies:** 7\
**Last updated:** [April 2, 2025, 11:23am UTC](https://forum.inductiveautomation.com/t/bug-13619-view-crashing-unable-to-deserialize-resource/24241 "2025-04-02T11:23:54Z")

</div>

Today I spent hours remaking a view because something was crashing it. The bad thing is that once it crashed, I couldn't open it again, regardless of saving it, restarting, etc. Once it's saved, it won't parse the file a…

---

## [Advanced Stylesheet CSS using Media Queries, And More](https://forum.inductiveautomation.com/t/advanced-stylesheet-css-using-media-queries-and-more/104249)

<div class="topic-metadata">

**Author:** [@Zachary\_Sturgeon](https://forum.inductiveautomation.com/u/Zachary_Sturgeon)\
**Replies:** 2\
**Last updated:** [April 2, 2025, 10:39am UTC](https://forum.inductiveautomation.com/t/advanced-stylesheet-css-using-media-queries-and-more/104249 "2025-04-02T10:39:24Z")

</div>

Hello everyone, long time viewer, first time caller. I have become pretty versed in making Perspective applications in a manner that replicates how one would make the same project in Vision; large, inflexible facility m…

---

## [How to get the Scrollbar position and value?](https://forum.inductiveautomation.com/t/how-to-get-the-scrollbar-position-and-value/103313)

<div class="topic-metadata">

**Author:** [@MUNIYANDI\_D](https://forum.inductiveautomation.com/u/MUNIYANDI_D)\
**Replies:** 6\
**Last updated:** [April 2, 2025, 10:29am UTC](https://forum.inductiveautomation.com/t/how-to-get-the-scrollbar-position-and-value/103313 "2025-04-02T10:29:41Z")

</div>

Hi all, i hope everyone is well. I have doubts about the vision power table. I need to take the position of the vertical scrollbar position. Now, I can take the vertical scrollbar's position while scrolling with my mouse…

---

## [Lack of tag historian values](https://forum.inductiveautomation.com/t/lack-of-tag-historian-values/104536)

<div class="topic-metadata">

**Author:** [@Jose\_Hervas\_Chico](https://forum.inductiveautomation.com/u/Jose_Hervas_Chico)\
**Replies:** 2\
**Last updated:** [April 2, 2025, 9:54am UTC](https://forum.inductiveautomation.com/t/lack-of-tag-historian-values/104536 "2025-04-02T09:54:02Z")

</div>

Good evening, I have a historized tag like follows: It should be registering the values every second (the value is changing continuously). But when I try to retrieve the values of the last 50 seconds, I find only f…

---

## [Reading data from GUI AlarmStatusTable to check Cell Style](https://forum.inductiveautomation.com/t/reading-data-from-gui-alarmstatustable-to-check-cell-style/102930)

<div class="topic-metadata">

**Author:** [@iwan.tolboom](https://forum.inductiveautomation.com/u/iwan.tolboom)\
**Replies:** 2\
**Last updated:** [April 2, 2025, 9:44am UTC](https://forum.inductiveautomation.com/t/reading-data-from-gui-alarmstatustable-to-check-cell-style/102930 "2025-04-02T09:44:54Z")

</div>

Based on the code in this topic Customizing Alarm Status Table we want to read the rows displayed in the AlarmStatusTable to check if the styling (color and font) of each row is correct(values of cells would be a plus). …

---

## [Wrap text in Alarm Status Table component](https://forum.inductiveautomation.com/t/wrap-text-in-alarm-status-table-component/100918)

<div class="topic-metadata">

**Author:** [@Filarm27](https://forum.inductiveautomation.com/u/Filarm27)\
**Replies:** 1\
**Last updated:** [April 2, 2025, 9:38am UTC](https://forum.inductiveautomation.com/t/wrap-text-in-alarm-status-table-component/100918 "2025-04-02T09:38:57Z")

</div>

Hello everyone, I am looking for a way to wrap the text of a long alarm description so that it can be fully displayed in the Alarm Status Table. I’m already aware of the HTML breakline method, but in this particular si…

---

## [Change Border color DateTime Input](https://forum.inductiveautomation.com/t/change-border-color-datetime-input/104575)

<div class="topic-metadata">

**Author:** [@dario.cappuccio](https://forum.inductiveautomation.com/u/dario.cappuccio)\
**Replies:** 2\
**Last updated:** [April 2, 2025, 8:41am UTC](https://forum.inductiveautomation.com/t/change-border-color-datetime-input/104575 "2025-04-02T08:41:48Z")

</div>

Hi, I want to change the boarder color of a date time input after the user select a date? I try using in the binding of the property boarder color but doesn't work. Any suggests?? Thanks if({this.props.value} = "" || {…

---

## [Limit Characters in a Textbox when Typing](https://forum.inductiveautomation.com/t/limit-characters-in-a-textbox-when-typing/29372)

<div class="topic-metadata">

**Author:** [@boyergary](https://forum.inductiveautomation.com/u/boyergary)\
**Replies:** 6\
**Last updated:** [April 2, 2025, 8:21am UTC](https://forum.inductiveautomation.com/t/limit-characters-in-a-textbox-when-typing/29372 "2025-04-02T08:21:42Z")

</div>

I simply want to set a maximum length on a textbox so that when the user gets to that point, they cannot type any more. Evidently, the Maximum Characters property doesn't actually prevent someone from continuing to type …

---

## [\[IGN-1485\] Component Handles Change in Percent vs Fixed Mode in Coordinate Container](https://forum.inductiveautomation.com/t/ign-1485-component-handles-change-in-percent-vs-fixed-mode-in-coordinate-container/83952)

<div class="topic-metadata">

**Author:** [@dberry](https://forum.inductiveautomation.com/u/dberry)\
**Replies:** 6\
**Last updated:** [April 2, 2025, 6:58am UTC](https://forum.inductiveautomation.com/t/ign-1485-component-handles-change-in-percent-vs-fixed-mode-in-coordinate-container/83952 "2025-04-02T06:58:17Z")

</div>

I am working with nested containers in Perspective to try to achieve a desired layout and scaling behavior, and trying to understand why component handles are moving relative to the component when switching between fixed…

---

## [User report data selection](https://forum.inductiveautomation.com/t/user-report-data-selection/104556)

<div class="topic-metadata">

**Author:** [@jkocbekmalepa](https://forum.inductiveautomation.com/u/jkocbekmalepa)\
**Replies:** 2\
**Last updated:** [April 2, 2025, 5:50am UTC](https://forum.inductiveautomation.com/t/user-report-data-selection/104556 "2025-04-02T05:50:16Z")

</div>

What is the best way to allow users to select which report pages to print? For example, I have 5 sensors each with their own report page containing related data e.g. page 1 for sensor 1, page 2 for sensor 2 etc. I want t…

---

## [I am not able to create a new view](https://forum.inductiveautomation.com/t/i-am-not-able-to-create-a-new-view/104497)

<div class="topic-metadata">

**Author:** [@babi6d](https://forum.inductiveautomation.com/u/babi6d)\
**Replies:** 10\
**Last updated:** [April 2, 2025, 5:10am UTC](https://forum.inductiveautomation.com/t/i-am-not-able-to-create-a-new-view/104497 "2025-04-02T05:10:39Z")

</div>

When I click on the "create new view" I am getting this error. I saw that the issue was present in 2019. Designer Launcher version: 1.1.43 expanded error: \[AWT-EventQueue-0\] ERROR com.inductiveautomation.ignition.cl…

---

## [Open on startup issues Perspective Workstation -](https://forum.inductiveautomation.com/t/open-on-startup-issues-perspective-workstation/104566)

<div class="topic-metadata">

**Author:** [@MAYUR\_GHUGE](https://forum.inductiveautomation.com/u/MAYUR_GHUGE)\
**Replies:** 0\
**Last updated:** [April 2, 2025, 3:08am UTC](https://forum.inductiveautomation.com/t/open-on-startup-issues-perspective-workstation/104566 "2025-04-02T03:08:55Z")

</div>

I created a Perspective workstation shortcut file and placed it in the shell:common startup folder. After restarting my PC, the runtime file opens, but I can't control or operate the SCADA; basically, the SCADA runtime i…

---

## [Issue with TabContainer and EmbeddedView Parameter Loading](https://forum.inductiveautomation.com/t/issue-with-tabcontainer-and-embeddedview-parameter-loading/104486)

<div class="topic-metadata">

**Author:** [@Lina\_Su](https://forum.inductiveautomation.com/u/Lina_Su)\
**Replies:** 4\
**Last updated:** [April 2, 2025, 3:08am UTC](https://forum.inductiveautomation.com/t/issue-with-tabcontainer-and-embeddedview-parameter-loading/104486 "2025-04-02T03:08:24Z")

</div>

Hi everyone, I'm currently working on a project where I have a TabContainer, and each tab contains an EmbeddedView. Inside each EmbeddedView, there is a FlexContainer, and within each FlexContainer, there are additional…

---

## [Issue with Dashboard Objects Rendering and not Scrolling](https://forum.inductiveautomation.com/t/issue-with-dashboard-objects-rendering-and-not-scrolling/104564)

<div class="topic-metadata">

**Author:** [@tebright1](https://forum.inductiveautomation.com/u/tebright1)\
**Replies:** 0\
**Last updated:** [April 2, 2025, 12:32am UTC](https://forum.inductiveautomation.com/t/issue-with-dashboard-objects-rendering-and-not-scrolling/104564 "2025-04-02T00:32:01Z")

</div>

I'm having two issues that are on the same view. My setup is a main view, with a tabbed view inside it. In that tabbed view is a dashboard object. With many repeated items. 1st issue. I'm unable to scroll from my phone…

---

## [Unable to connect to OPC UA server from outside the gateway](https://forum.inductiveautomation.com/t/unable-to-connect-to-opc-ua-server-from-outside-the-gateway/104561)

<div class="topic-metadata">

**Author:** [@patrick](https://forum.inductiveautomation.com/u/patrick)\
**Replies:** 5\
**Last updated:** [April 1, 2025, 11:04pm UTC](https://forum.inductiveautomation.com/t/unable-to-connect-to-opc-ua-server-from-outside-the-gateway/104561 "2025-04-01T23:04:03Z")

</div>

Hi there, I'm using Ignition Edge Panel 8.1.21 and I'm unable to connect to the OPC UA sever from a machine other than the gateway itself. (localhost connections, including the built-in "loopback" connection from the ga…

---

## [Multi-Instance Wizard Help](https://forum.inductiveautomation.com/t/multi-instance-wizard-help/104553)

<div class="topic-metadata">

**Author:** [@amarks](https://forum.inductiveautomation.com/u/amarks)\
**Replies:** 8\
**Last updated:** [April 1, 2025, 10:07pm UTC](https://forum.inductiveautomation.com/t/multi-instance-wizard-help/104553 "2025-04-01T22:07:31Z")

</div>

I have a UDT that I need to make 20 instances of and I'd like the name and a handful of parameters to increment. I've found the manual documentation on this to be a little lacking. Instance names should "AF1", "AF2"…

[Previous page](https://forum.inductiveautomation.com/latest.md?page=261)

[Next page](https://forum.inductiveautomation.com/latest.md?page=263)
