# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=286

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 287

---

## [Restart a device on a different gateway within the network](https://forum.inductiveautomation.com/t/restart-a-device-on-a-different-gateway-within-the-network/103147)

<div class="topic-metadata">

**Author:** [@e.lark](https://forum.inductiveautomation.com/u/e.lark)\
**Replies:** 1\
**Last updated:** [March 3, 2025, 2:24pm UTC](https://forum.inductiveautomation.com/t/restart-a-device-on-a-different-gateway-within-the-network/103147 "2025-03-03T14:24:02Z")

</div>

system.device.restart() only reaches devices listed on the gateway the project is located. I would like to monitor devices across the gateway network and restart them if necessary.

---

## [How to understand the scale mode of a tag](https://forum.inductiveautomation.com/t/how-to-understand-the-scale-mode-of-a-tag/103125)

<div class="topic-metadata">

**Author:** [@Lion\_Sun](https://forum.inductiveautomation.com/u/Lion_Sun)\
**Replies:** 2\
**Last updated:** [March 3, 2025, 2:23pm UTC](https://forum.inductiveautomation.com/t/how-to-understand-the-scale-mode-of-a-tag/103125 "2025-03-03T14:23:33Z")

</div>

I‘m not fully understand what‘s the meaning of scale mode for a tag. In the user manual, it says the scale mode stands for “if and how the tag value will be scaled between the source, and what is reported for the tag.” …

---

## [Need help to validate the security certificates while calling the APIs to exchange the data between 2 different Ignition Gateways](https://forum.inductiveautomation.com/t/need-help-to-validate-the-security-certificates-while-calling-the-apis-to-exchange-the-data-between-2-different-ignition-gateways/103134)

<div class="topic-metadata">

**Author:** [@ravi.nimase](https://forum.inductiveautomation.com/u/ravi.nimase)\
**Replies:** 1\
**Last updated:** [March 3, 2025, 2:10pm UTC](https://forum.inductiveautomation.com/t/need-help-to-validate-the-security-certificates-while-calling-the-apis-to-exchange-the-data-between-2-different-ignition-gateways/103134 "2025-03-03T14:10:32Z")

</div>

I am facing issue when I am trying to validate the security certificate while calling the APIs using system function as shown in above image, currently I am using the bypass\_cert\_validation as True and it is working f…

---

## [OCPP protocol driver for Ignition](https://forum.inductiveautomation.com/t/ocpp-protocol-driver-for-ignition/63705)

<div class="topic-metadata">

**Author:** [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Replies:** 4\
**Last updated:** [March 3, 2025, 12:18pm UTC](https://forum.inductiveautomation.com/t/ocpp-protocol-driver-for-ignition/63705 "2025-03-03T12:18:33Z")

</div>

Does anyone know if someone has written an OCPP (Open Charge Point Protocol) driver for Ignition? https://www.openchargealliance.org/protocols/ocpp-201/

---

## [SQL Bridge Block Transaction to SQL View](https://forum.inductiveautomation.com/t/sql-bridge-block-transaction-to-sql-view/103037)

<div class="topic-metadata">

**Author:** [@callummacleod](https://forum.inductiveautomation.com/u/callummacleod)\
**Replies:** 6\
**Last updated:** [March 3, 2025, 11:20am UTC](https://forum.inductiveautomation.com/t/sql-bridge-block-transaction-to-sql-view/103037 "2025-03-03T11:20:43Z")

</div>

Morning All, I have been trying in vain for an hour or 2 now to create an SQL Bridge block transaction to read from an SQL view. I cannot figure this one out as it looks like SQL bridge needs to write back to the view b…

---

## [Issue while using stored Procedure group with PostgreSQL database](https://forum.inductiveautomation.com/t/issue-while-using-stored-procedure-group-with-postgresql-database/103129)

<div class="topic-metadata">

**Author:** [@Hari\_Mhasalekar](https://forum.inductiveautomation.com/u/Hari_Mhasalekar)\
**Replies:** 1\
**Last updated:** [March 3, 2025, 10:06am UTC](https://forum.inductiveautomation.com/t/issue-while-using-stored-procedure-group-with-postgresql-database/103129 "2025-03-03T10:06:33Z")

</div>

Hello Team, I have created a stored procedure transaction group to save my machine tags values into postgreSQL. but while execution of transaction group showing an error like "Error during group execution. Error regist…

---

## [Style Tree Items programmatically](https://forum.inductiveautomation.com/t/style-tree-items-programmatically/102894)

<div class="topic-metadata">

**Author:** [@Rene\_Ries](https://forum.inductiveautomation.com/u/Rene_Ries)\
**Replies:** 4\
**Last updated:** [March 3, 2025, 7:09am UTC](https://forum.inductiveautomation.com/t/style-tree-items-programmatically/102894 "2025-03-03T07:09:19Z")

</div>

Hello Forum, is it possible to style TreeView items via script, e.g. current orders should get a different icon or the font should be colored differently. Is there a possibility to read the CSS classes / ID's and to cha…

---

## [Help - running named queries](https://forum.inductiveautomation.com/t/help-running-named-queries/103109)

<div class="topic-metadata">

**Author:** [@Nicole\_McCormack](https://forum.inductiveautomation.com/u/Nicole_McCormack)\
**Replies:** 11\
**Last updated:** [March 3, 2025, 5:46am UTC](https://forum.inductiveautomation.com/t/help-running-named-queries/103109 "2025-03-03T05:46:54Z")

</div>

If I use system.db.runNamedQuery in a script when a button is pushed or if I do an event binding to the names query when the window opens (button will open next window) how do I know my gateway name query has finished? …

---

## [\[BUG?\]Internal IdP "Rememeber me" not working?](https://forum.inductiveautomation.com/t/bug-internal-idp-rememeber-me-not-working/103118)

<div class="topic-metadata">

**Author:** [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Replies:** 0\
**Last updated:** [March 3, 2025, 5:43am UTC](https://forum.inductiveautomation.com/t/bug-internal-idp-rememeber-me-not-working/103118 "2025-03-03T05:43:19Z")

</div>

This "remember me" checkbox doesn't seem to work on v8.1.45. I've launched a designer session checked it and logged in, then started another designer session but I still needed to log in again.

---

## [Popup Title Bar Look and Feel](https://forum.inductiveautomation.com/t/popup-title-bar-look-and-feel/68586)

<div class="topic-metadata">

**Author:** [@amarks](https://forum.inductiveautomation.com/u/amarks)\
**Replies:** 5\
**Last updated:** [March 3, 2025, 4:28am UTC](https://forum.inductiveautomation.com/t/popup-title-bar-look-and-feel/68586 "2025-03-03T04:28:51Z")

</div>

Is there a way to change the look and feel (style) of the popup title bar?

---

## [Console error wont resolve - MES production model error](https://forum.inductiveautomation.com/t/console-error-wont-resolve-mes-production-model-error/103016)

<div class="topic-metadata">

**Author:** [@garth1reynolds](https://forum.inductiveautomation.com/u/garth1reynolds)\
**Replies:** 2\
**Last updated:** [March 3, 2025, 3:55am UTC](https://forum.inductiveautomation.com/t/console-error-wont-resolve-mes-production-model-error/103016 "2025-03-03T03:55:14Z")

</div>

HI, IM using an earlier version of ignition (7.6.4) and V1 of Sepesoft MES. At some point our console fault log is continually peppered with production recorder error for an infeed counter in the MES it appears. Howev…

---

## [Licensing issue with Ignition Edge](https://forum.inductiveautomation.com/t/licensing-issue-with-ignition-edge/103065)

<div class="topic-metadata">

**Author:** [@Alex\_Jaffe](https://forum.inductiveautomation.com/u/Alex_Jaffe)\
**Replies:** 2\
**Last updated:** [March 2, 2025, 1:57pm UTC](https://forum.inductiveautomation.com/t/licensing-issue-with-ignition-edge/103065 "2025-03-02T13:57:41Z")

</div>

I am having issues with properly licensing our ignition edge. When i try and activate the License offline i upload the .ipl file and get the following message but we are still in the trial period with no license activat…

---

## [Arduino integration for Maker Edition](https://forum.inductiveautomation.com/t/arduino-integration-for-maker-edition/101261)

<div class="topic-metadata">

**Author:** [@Owen\_Chirstensen](https://forum.inductiveautomation.com/u/Owen_Chirstensen)\
**Replies:** 4\
**Last updated:** [March 2, 2025, 8:56pm UTC](https://forum.inductiveautomation.com/t/arduino-integration-for-maker-edition/101261 "2025-03-02T20:56:20Z")

</div>

Hello everyone, I have been learning ignition though your inductive university for the past few months and I feel like I have a good knowledge of the basics. I am now interested in using Maker Edition of ignition to cr…

---

## [Maker version still possible on Raspberry Pi (RPi)?](https://forum.inductiveautomation.com/t/maker-version-still-possible-on-raspberry-pi-rpi/90586)

<div class="topic-metadata">

**Author:** [@Peter\_NL](https://forum.inductiveautomation.com/u/Peter_NL)\
**Replies:** 5\
**Last updated:** [March 2, 2025, 8:46pm UTC](https://forum.inductiveautomation.com/t/maker-version-still-possible-on-raspberry-pi-rpi/90586 "2025-03-02T20:46:32Z")

</div>

Hello, I'm doing the course and use the Ignition Maker version. Is this Maker version still installable on the RPI? If so, specific requirements or suggestions regarding type of RPI and specs? Anyone here with good e…

---

## [Spanish Character Issue](https://forum.inductiveautomation.com/t/spanish-character-issue/103025)

<div class="topic-metadata">

**Author:** [@sharmaaman3](https://forum.inductiveautomation.com/u/sharmaaman3)\
**Replies:** 10\
**Last updated:** [March 2, 2025, 7:32am UTC](https://forum.inductiveautomation.com/t/spanish-character-issue/103025 "2025-03-02T07:32:37Z")

</div>

i am using this script in script console for handling spanish character but not working def transform(value): try: corrected\_text = value.encode('iso-8859-1').decode('utf-8') except Exception as e: corrected\_text = …

---

## [Editing Perspective Table Selected Field Using a Key](https://forum.inductiveautomation.com/t/editing-perspective-table-selected-field-using-a-key/103088)

<div class="topic-metadata">

**Author:** [@cristhian.rey](https://forum.inductiveautomation.com/u/cristhian.rey)\
**Replies:** 0\
**Last updated:** [March 2, 2025, 12:09am UTC](https://forum.inductiveautomation.com/t/editing-perspective-table-selected-field-using-a-key/103088 "2025-03-02T00:09:25Z")

</div>

Hi I have a perspective table where a user is filling data in. I put a code inside the onEditCellCommit Action to select the next right cell when the user press enter after inserting data. Even though the next cell is …

---

## [Creating expression tags with scripting console](https://forum.inductiveautomation.com/t/creating-expression-tags-with-scripting-console/103079)

<div class="topic-metadata">

**Author:** [@jacob.brenkendorff](https://forum.inductiveautomation.com/u/jacob.brenkendorff)\
**Replies:** 3\
**Last updated:** [March 1, 2025, 10:18pm UTC](https://forum.inductiveautomation.com/t/creating-expression-tags-with-scripting-console/103079 "2025-03-01T22:18:28Z")

</div>

Im trying to create a folder full of expression tags tags with the scripting console. each tag should have a different expression in it, one per hour 0-23. Chat GPT generated this for me, but it generates memory tags, n…

---

## [How to reverse a Simple Gauge?](https://forum.inductiveautomation.com/t/how-to-reverse-a-simple-gauge/103083)

<div class="topic-metadata">

**Author:** [@Filip\_Olsen1](https://forum.inductiveautomation.com/u/Filip_Olsen1)\
**Replies:** 1\
**Last updated:** [March 1, 2025, 12:31pm UTC](https://forum.inductiveautomation.com/t/how-to-reverse-a-simple-gauge/103083 "2025-03-01T12:31:07Z")

</div>

Hi I have visualized a water arc that is "jumping" from the nozzle. a simple way I did this was to use an Gauge, and animated it. Works fine, but when I turn it OFF, it goes back the same direction. Is it somehow pos…

---

## [Change Dock Menu Width](https://forum.inductiveautomation.com/t/change-dock-menu-width/103081)

<div class="topic-metadata">

**Author:** [@TechEnlive](https://forum.inductiveautomation.com/u/TechEnlive)\
**Replies:** 0\
**Last updated:** [March 1, 2025, 9:05am UTC](https://forum.inductiveautomation.com/t/change-dock-menu-width/103081 "2025-03-01T09:05:39Z")

</div>

Hi, on the button click i configured Dock Toggle dock menu and it closes the whole menu but i want to show the Menu Icon when it closes.

---

## [Spinner Increment Not Working](https://forum.inductiveautomation.com/t/spinner-increment-not-working/103042)

<div class="topic-metadata">

**Author:** [@hs130731](https://forum.inductiveautomation.com/u/hs130731)\
**Replies:** 2\
**Last updated:** [March 1, 2025, 6:44am UTC](https://forum.inductiveautomation.com/t/spinner-increment-not-working/103042 "2025-03-01T06:44:35Z")

</div>

I set the increment value in the spinner properties (e.g., 5), but the actual step change only increases or decreases by 1 Is there anything I might have missed? Or is the increment value fixed at 1 Thanks

---

## [Module Development In ignition for Focus protocol](https://forum.inductiveautomation.com/t/module-development-in-ignition-for-focus-protocol/103044)

<div class="topic-metadata">

**Author:** [@srinivasan\_s](https://forum.inductiveautomation.com/u/srinivasan_s)\
**Replies:** 2\
**Last updated:** [March 1, 2025, 6:31am UTC](https://forum.inductiveautomation.com/t/module-development-in-ignition-for-focus-protocol/103044 "2025-03-01T06:31:37Z")

</div>

We have data collector driver written in C language that will fetch the data tags from Fanuc devices via Focus protocol. Same that data collector service can be developed in ignition as Module .modl? in Java Kindly advi…

---

## [Accessing a Perspective Component on a View from within a popup](https://forum.inductiveautomation.com/t/accessing-a-perspective-component-on-a-view-from-within-a-popup/103066)

<div class="topic-metadata">

**Author:** [@MG3](https://forum.inductiveautomation.com/u/MG3)\
**Replies:** 5\
**Last updated:** [March 1, 2025, 1:57am UTC](https://forum.inductiveautomation.com/t/accessing-a-perspective-component-on-a-view-from-within-a-popup/103066 "2025-03-01T01:57:14Z")

</div>

Hi all, I am currently working on a project which requires a popup to be able to run a method on a component on another view (more specifically the map components flyTo() method). I was wondering if there is anyway of …

---

## [Perspective Popup vs view vs expand dock](https://forum.inductiveautomation.com/t/perspective-popup-vs-view-vs-expand-dock/103074)

<div class="topic-metadata">

**Author:** [@Eugene49](https://forum.inductiveautomation.com/u/Eugene49)\
**Replies:** 2\
**Last updated:** [March 1, 2025, 12:59am UTC](https://forum.inductiveautomation.com/t/perspective-popup-vs-view-vs-expand-dock/103074 "2025-03-01T00:59:43Z")

</div>

Hi, Say from overview screen, user would want to drill down, navigate to a more detailed screen. What would you provide and why? a popup view? a primary view? or expand a hidden dock? Hidden dock is cool, as its the…

---

## [Slow response, Ignition talking to M580 via ModbusTCP](https://forum.inductiveautomation.com/t/slow-response-ignition-talking-to-m580-via-modbustcp/69749)

<div class="topic-metadata">

**Author:** [@chaoliang](https://forum.inductiveautomation.com/u/chaoliang)\
**Replies:** 22\
**Last updated:** [February 28, 2025, 9:25pm UTC](https://forum.inductiveautomation.com/t/slow-response-ignition-talking-to-m580-via-modbustcp/69749 "2025-02-28T21:25:17Z")

</div>

Hi, We have a couple of projects using Schneider M580 PLC. There are all slow response when read/write tags from ignition, about 2-3 sec delay. Total number of tags configured is around 5-10k. It's using Modbus driver…

---

## [Insert Results of Named Query to Text Field](https://forum.inductiveautomation.com/t/insert-results-of-named-query-to-text-field/103046)

<div class="topic-metadata">

**Author:** [@Rich\_Knoll](https://forum.inductiveautomation.com/u/Rich_Knoll)\
**Replies:** 3\
**Last updated:** [February 28, 2025, 8:01pm UTC](https://forum.inductiveautomation.com/t/insert-results-of-named-query-to-text-field/103046 "2025-02-28T20:01:06Z")

</div>

Hello all, I think this one should be easy but I'm a bit stumped. I need to use a button to fire a named query which will return only one result and insert that result into a text field. I do not want to bind the text…

---

## [Expression Tag - runScript](https://forum.inductiveautomation.com/t/expression-tag-runscript/103050)

<div class="topic-metadata">

**Author:** [@Filarm27](https://forum.inductiveautomation.com/u/Filarm27)\
**Replies:** 9\
**Last updated:** [February 28, 2025, 7:40pm UTC](https://forum.inductiveautomation.com/t/expression-tag-runscript/103050 "2025-02-28T19:40:24Z")

</div>

Hi, I am trying to run a script placed inside the Project Library via an Expression Tag. The script is as follows: def MyPath(): ... example script ... The Expression Tag is set as follows: data Type: Fl…

---

## [Module generator exception during clean build](https://forum.inductiveautomation.com/t/module-generator-exception-during-clean-build/93244)

<div class="topic-metadata">

**Author:** [@abelew](https://forum.inductiveautomation.com/u/abelew)\
**Replies:** 13\
**Last updated:** [February 28, 2025, 7:21pm UTC](https://forum.inductiveautomation.com/t/module-generator-exception-during-clean-build/93244 "2025-02-28T19:21:10Z")

</div>

I'm following the getting started documents. running gradlew.bat clean build in ignition-module-tools\\generator throws the following exception. C:\\Users\\osk\\eclipse-workspace\\ignition-module-tools\\generator\>gradlew.bat …

---

## [Calling DNP3 experts - what devices do you use?](https://forum.inductiveautomation.com/t/calling-dnp3-experts-what-devices-do-you-use/62057)

<div class="topic-metadata">

**Author:** [@nathan.boeger](https://forum.inductiveautomation.com/u/nathan.boeger)\
**Replies:** 8\
**Last updated:** [February 28, 2025, 7:01pm UTC](https://forum.inductiveautomation.com/t/calling-dnp3-experts-what-devices-do-you-use/62057 "2025-02-28T19:01:46Z")

</div>

Calling DNP3 experts. Seeking to expand a testing lab with DNP3 representative devices. Feedback: SEL RTAC from @DSandy. Would a 3505 work? The 651R looks awesome, likely beyond scope of our lab. Previous Feedback: …

---

## [Ignition SCADA -Vision Client Web Browser Component issue](https://forum.inductiveautomation.com/t/ignition-scada-vision-client-web-browser-component-issue/102623)

<div class="topic-metadata">

**Author:** [@sagar\_chavan](https://forum.inductiveautomation.com/u/sagar_chavan)\
**Replies:** 7\
**Last updated:** [February 28, 2025, 6:56pm UTC](https://forum.inductiveautomation.com/t/ignition-scada-vision-client-web-browser-component-issue/102623 "2025-02-28T18:56:45Z")

</div>

we are facing an issue with Ignition SCADA Vision Client Web Browser component while displaying or loading the images associated with valid URL. Ignition Scada Version we are using is Version: 8.1.39 Web Browser 5.1.39…

---

## [Adding OPCUA device](https://forum.inductiveautomation.com/t/adding-opcua-device/103014)

<div class="topic-metadata">

**Author:** [@Marco\_Palomino](https://forum.inductiveautomation.com/u/Marco_Palomino)\
**Replies:** 3\
**Last updated:** [February 28, 2025, 6:39pm UTC](https://forum.inductiveautomation.com/t/adding-opcua-device/103014 "2025-02-28T18:39:42Z")

</div>

Hello guys, I am trying to add a UPCUA devices to my gateway. however, it is giving me and error my gateway IP is: 10.128.208.193. any ideas on how to solve this?

[Previous page](https://forum.inductiveautomation.com/latest.md?page=285)

[Next page](https://forum.inductiveautomation.com/latest.md?page=287)
