# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=308

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 309

---

## [Design Launcher using IP for backup](https://forum.inductiveautomation.com/t/design-launcher-using-ip-for-backup/101656)

<div class="topic-metadata">

**Author:** [@Jonathan](https://forum.inductiveautomation.com/u/Jonathan)\
**Replies:** 1\
**Last updated:** [January 31, 2025, 12:43am UTC](https://forum.inductiveautomation.com/t/design-launcher-using-ip-for-backup/101656 "2025-01-31T00:43:13Z")

</div>

I am trying to setup new redundant pair gateway instance using 8.1.45. I have them both setup to use self signed SSL certificates. When I try to add the gateway to the designer launcher it first trusts the masters gatewa…

---

## [Power Chart Annotation with derived Pen Source](https://forum.inductiveautomation.com/t/power-chart-annotation-with-derived-pen-source/90650)

<div class="topic-metadata">

**Author:** [@Craig\_Rathbone](https://forum.inductiveautomation.com/u/Craig_Rathbone)\
**Replies:** 3\
**Last updated:** [January 30, 2025, 11:08pm UTC](https://forum.inductiveautomation.com/t/power-chart-annotation-with-derived-pen-source/90650 "2025-01-30T23:08:49Z")

</div>

Here's a fun one, probably not enough for me to raise a support ticket, but interesting to see if it's just me: I have a PowerChart, and I have set it up to be dynamic depending on a few parameters and custom values (UR…

---

## [\[BUG\] Setting SVG meta.visible False does not hide elements with visibility: visible](https://forum.inductiveautomation.com/t/bug-setting-svg-meta-visible-false-does-not-hide-elements-with-visibility-visible/101594)

<div class="topic-metadata">

**Author:** [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Replies:** 3\
**Last updated:** [January 30, 2025, 10:22pm UTC](https://forum.inductiveautomation.com/t/bug-setting-svg-meta-visible-false-does-not-hide-elements-with-visibility-visible/101594 "2025-01-30T22:22:38Z")

</div>

v8.1.43 I found a weird bug where I have an SVG with bindings on some elements which sets their visibility prop between hidden and visible. However, I also have a binding on the meta.visible prop as well which should hi…

---

## [Ignition and OPC DA with ABB - E\_NOINTERFACE](https://forum.inductiveautomation.com/t/ignition-and-opc-da-with-abb-e-nointerface/97628)

<div class="topic-metadata">

**Author:** [@Richard\_Giske](https://forum.inductiveautomation.com/u/Richard_Giske)\
**Replies:** 1\
**Last updated:** [January 30, 2025, 9:28pm UTC](https://forum.inductiveautomation.com/t/ignition-and-opc-da-with-abb-e-nointerface/97628 "2025-01-30T21:28:28Z")

</div>

I have a ignition gateway V8.1.43, connecting to an ABB AC800M PLC via the ABB's OPC DA server. The OPC DA server is running on the same gateway as the Ignition GW. I'm getting the connection up and running, I can brow…

---

## [Ignition Scripting API now available via pypi](https://forum.inductiveautomation.com/t/ignition-scripting-api-now-available-via-pypi/50800)

<div class="topic-metadata">

**Author:** [@cesrom](https://forum.inductiveautomation.com/u/cesrom)\
**Replies:** 18\
**Last updated:** [January 30, 2025, 8:35pm UTC](https://forum.inductiveautomation.com/t/ignition-scripting-api-now-available-via-pypi/50800 "2025-01-30T20:35:26Z")

</div>

In the past I have shared with this community the Ignition repo I maintain at GitHub: And inspired by a comment made by @kgamble and someone’s fork, I created the ignition-api package available to anyone interested. …

---

## [Vision Launcher Launch Older Gateway Projects](https://forum.inductiveautomation.com/t/vision-launcher-launch-older-gateway-projects/101644)

<div class="topic-metadata">

**Author:** [@amarks](https://forum.inductiveautomation.com/u/amarks)\
**Replies:** 2\
**Last updated:** [January 30, 2025, 8:31pm UTC](https://forum.inductiveautomation.com/t/vision-launcher-launch-older-gateway-projects/101644 "2025-01-30T20:31:03Z")

</div>

If I download the latest vision client launcher, what's the oldest gateway version for projects that the launcher would be able to open? I have a v7.7 gateway and I just don't remember exactly how to add a new client la…

---

## [Tag Security in MQTT Engine](https://forum.inductiveautomation.com/t/tag-security-in-mqtt-engine/101643)

<div class="topic-metadata">

**Author:** [@Sean\_Glantz](https://forum.inductiveautomation.com/u/Sean_Glantz)\
**Replies:** 1\
**Last updated:** [January 30, 2025, 8:15pm UTC](https://forum.inductiveautomation.com/t/tag-security-in-mqtt-engine/101643 "2025-01-30T20:15:14Z")

</div>

Our project has multiple edge devices with common UDTs publishing to our cloud gateway running MQTT distributor and engine. Our clients on the edge access the project using perspective. I want to restrict our clients to…

---

## [Issues with writing to DB](https://forum.inductiveautomation.com/t/issues-with-writing-to-db/101039)

<div class="topic-metadata">

**Author:** [@Nicholas\_Hunnell](https://forum.inductiveautomation.com/u/Nicholas_Hunnell)\
**Replies:** 5\
**Last updated:** [January 30, 2025, 7:40pm UTC](https://forum.inductiveautomation.com/t/issues-with-writing-to-db/101039 "2025-01-30T19:40:33Z")

</div>

Hello, all my named queries work in the designer both in testing and when running specific views on the designer. But when I spin up the project nothing is going through and it is now giving me a web socket disconnection…

---

## [Auto log-out in perspective](https://forum.inductiveautomation.com/t/auto-log-out-in-perspective/101615)

<div class="topic-metadata">

**Author:** [@Kain\_Denon](https://forum.inductiveautomation.com/u/Kain_Denon)\
**Replies:** 4\
**Last updated:** [January 30, 2025, 7:28pm UTC](https://forum.inductiveautomation.com/t/auto-log-out-in-perspective/101615 "2025-01-30T19:28:40Z")

</div>

While working on a project, I want to introduce the functionality that users get automatically logged out after x amount of time inactivity. I have introduced a logout button with the script "system.perspective.logout()"…

---

## [Ignition Edge Perspective - Getting the Project Title into the project as a value](https://forum.inductiveautomation.com/t/ignition-edge-perspective-getting-the-project-title-into-the-project-as-a-value/101639)

<div class="topic-metadata">

**Author:** [@Brian\_Stilson](https://forum.inductiveautomation.com/u/Brian_Stilson)\
**Replies:** 1\
**Last updated:** [January 30, 2025, 7:06pm UTC](https://forum.inductiveautomation.com/t/ignition-edge-perspective-getting-the-project-title-into-the-project-as-a-value/101639 "2025-01-30T19:06:58Z")

</div>

Since it's Perspective, the Client/System/ProjectTitle tag is not accessible by the project. Since it's Edge, my Project title will always be "Edge", so system.util.getProjectName() is out, too. Is there any way I can ge…

---

## [Tracking Perspective stats](https://forum.inductiveautomation.com/t/tracking-perspective-stats/101632)

<div class="topic-metadata">

**Author:** [@justin.brzozoski](https://forum.inductiveautomation.com/u/justin.brzozoski)\
**Replies:** 1\
**Last updated:** [January 30, 2025, 6:36pm UTC](https://forum.inductiveautomation.com/t/tracking-perspective-stats/101632 "2025-01-30T18:36:15Z")

</div>

I'm not seeing any informative system tags for Perspective like there are for DB or MQTT connections. If I wanted to track the number of active sessions historically, is my best option to make a timed script that uses s…

---

## [Gateway Event Scripts Window Missing Events](https://forum.inductiveautomation.com/t/gateway-event-scripts-window-missing-events/101581)

<div class="topic-metadata">

**Author:** [@bfeas](https://forum.inductiveautomation.com/u/bfeas)\
**Replies:** 2\
**Last updated:** [January 30, 2025, 5:51pm UTC](https://forum.inductiveautomation.com/t/gateway-event-scripts-window-missing-events/101581 "2025-01-30T17:51:39Z")

</div>

Does anyone know what would cause the gateway event scripts window to open with all the events missing? This has happened numerous times and the only way I found to fix it is to re-open the project.

---

## [Which webserver does ignition perspective use?](https://forum.inductiveautomation.com/t/which-webserver-does-ignition-perspective-use/101634)

<div class="topic-metadata">

**Author:** [@ftuquabo](https://forum.inductiveautomation.com/u/ftuquabo)\
**Replies:** 2\
**Last updated:** [January 30, 2025, 5:34pm UTC](https://forum.inductiveautomation.com/t/which-webserver-does-ignition-perspective-use/101634 "2025-01-30T17:34:59Z")

</div>

Which webserver does Ignition Perspective Use? If it doesn't use Apache, what would be the equivalent?

---

## [Best way to tie active directory roles to Ignition roles](https://forum.inductiveautomation.com/t/best-way-to-tie-active-directory-roles-to-ignition-roles/101571)

<div class="topic-metadata">

**Author:** [@atsm26](https://forum.inductiveautomation.com/u/atsm26)\
**Replies:** 3\
**Last updated:** [January 30, 2025, 5:31pm UTC](https://forum.inductiveautomation.com/t/best-way-to-tie-active-directory-roles-to-ignition-roles/101571 "2025-01-30T17:31:22Z")

</div>

Our end goal is that we want to create Active Directory groups and use that for how people login to Ignition/perspective projects. Right now, we have an Identity Provider set up and that is how we login to a gateway/pro…

---

## [Open/Swap button action](https://forum.inductiveautomation.com/t/open-swap-button-action/101628)

<div class="topic-metadata">

**Author:** [@Dustin\_VanKeuren](https://forum.inductiveautomation.com/u/Dustin_VanKeuren)\
**Replies:** 2\
**Last updated:** [January 30, 2025, 5:04pm UTC](https://forum.inductiveautomation.com/t/open-swap-button-action/101628 "2025-01-30T17:04:21Z")

</div>

We have a docked window that has a set of buttons for navigation. Sometimes when navigating to a screen and then navigating back to the screen you just came from the button that takes you back to that previous screen do…

---

## [TextField won't accept the first "1"](https://forum.inductiveautomation.com/t/textfield-wont-accept-the-first-1/101614)

<div class="topic-metadata">

**Author:** [@Lynn\_Martineau](https://forum.inductiveautomation.com/u/Lynn_Martineau)\
**Replies:** 2\
**Last updated:** [January 30, 2025, 4:22pm UTC](https://forum.inductiveautomation.com/t/textfield-wont-accept-the-first-1/101614 "2025-01-30T16:22:45Z")

</div>

I'm using a TextField in a Perspective 8.1.33 view. If the user enters data into the text field that starts with the number "1", it is always ignored until they type it a 2nd time. No other digit or alpha character beh…

---

## [Motion arrow 0 to 90 degrees](https://forum.inductiveautomation.com/t/motion-arrow-0-to-90-degrees/101622)

<div class="topic-metadata">

**Author:** [@marco\_boccagni](https://forum.inductiveautomation.com/u/marco_boccagni)\
**Replies:** 2\
**Last updated:** [January 30, 2025, 3:43pm UTC](https://forum.inductiveautomation.com/t/motion-arrow-0-to-90-degrees/101622 "2025-01-30T15:43:21Z")

</div>

I need to change the position of an arrow from 0° to 90 ° from a value of a tag . Like a hand of a clock . the variation of the arrow angle must pivot on the end and not starting from the center. (as shown in the photo) …

---

## [Perspective Input cannot handle ~ (tilde) character](https://forum.inductiveautomation.com/t/perspective-input-cannot-handle-tilde-character/101563)

<div class="topic-metadata">

**Author:** [@Julian\_Islic](https://forum.inductiveautomation.com/u/Julian_Islic)\
**Replies:** 6\
**Last updated:** [January 30, 2025, 3:29pm UTC](https://forum.inductiveautomation.com/t/perspective-input-cannot-handle-tilde-character/101563 "2025-01-30T15:29:26Z")

</div>

Ignition perspective Text Input doesn't seem to except the ~ (tilde) character in any text input field. We are using a barcode scanner that emulates a keyboard (no prefix or suffix) and are trying to paste into in input…

---

## [Alarm Status table and acknowledge button](https://forum.inductiveautomation.com/t/alarm-status-table-and-acknowledge-button/101617)

<div class="topic-metadata">

**Author:** [@mahsasalimi](https://forum.inductiveautomation.com/u/mahsasalimi)\
**Replies:** 1\
**Last updated:** [January 30, 2025, 3:07pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-and-acknowledge-button/101617 "2025-01-30T15:07:40Z")

</div>

Hi , I am using the alarm status table for my alarm list. my question is why the acknowledge button show up at all , if my alarm is already acknowledged? is this a known issue? I am using 8.1.44

---

## [Ignition Perspective Loads to White Screen Need Help](https://forum.inductiveautomation.com/t/ignition-perspective-loads-to-white-screen-need-help/101604)

<div class="topic-metadata">

**Author:** [@tekid\_ap](https://forum.inductiveautomation.com/u/tekid_ap)\
**Replies:** 3\
**Last updated:** [January 30, 2025, 2:49pm UTC](https://forum.inductiveautomation.com/t/ignition-perspective-loads-to-white-screen-need-help/101604 "2025-01-30T14:49:55Z")

</div>

Hi everyone, Iam facing an issue where my Ignition Perspective client loads but only shows a white screen, with no interface or content. The gateway is running fine, and other clients are working properly, but this spe…

---

## [Socket communication: Sometimes I received long messages in parts](https://forum.inductiveautomation.com/t/socket-communication-sometimes-i-received-long-messages-in-parts/101582)

<div class="topic-metadata">

**Author:** [@Leonel](https://forum.inductiveautomation.com/u/Leonel)\
**Replies:** 4\
**Last updated:** [January 30, 2025, 2:42pm UTC](https://forum.inductiveautomation.com/t/socket-communication-sometimes-i-received-long-messages-in-parts/101582 "2025-01-30T14:42:17Z")

</div>

Hi! I am working on a project with several Atlas Copco controllers and I control all those Atlases with socket communication in Ignition.. I send and receive several messages from those Atlas (communication enable, pro…

---

## [Deselect Item in XY Chart](https://forum.inductiveautomation.com/t/deselect-item-in-xy-chart/101549)

<div class="topic-metadata">

**Author:** [@Alexander\_Waizmann](https://forum.inductiveautomation.com/u/Alexander_Waizmann)\
**Replies:** 5\
**Last updated:** [January 30, 2025, 1:32pm UTC](https://forum.inductiveautomation.com/t/deselect-item-in-xy-chart/101549 "2025-01-30T13:32:46Z")

</div>

Hi! I am creating a system in Perspective where a user can click on a bullet data point on an XY chart, which launches a popup to edit that data, and then closes and is supposed to deselect the point on the XY chart. Ho…

---

## [Ignition Perspective table Virtualized and Pager explanations](https://forum.inductiveautomation.com/t/ignition-perspective-table-virtualized-and-pager-explanations/101605)

<div class="topic-metadata">

**Author:** [@davee\_s](https://forum.inductiveautomation.com/u/davee_s)\
**Replies:** 3\
**Last updated:** [January 30, 2025, 1:10pm UTC](https://forum.inductiveautomation.com/t/ignition-perspective-table-virtualized-and-pager-explanations/101605 "2025-01-30T13:10:31Z")

</div>

Hello guys, Ignition 8.1.45 Perspective I want to know the differences in fact of performance and behavior in a Perspective table when using properties "Virtualized" and "Pager". I need to display tables with a large d…

---

## [Ignition v8.1 perspective project CPU overload issue](https://forum.inductiveautomation.com/t/ignition-v8-1-perspective-project-cpu-overload-issue/101598)

<div class="topic-metadata">

**Author:** [@zhetao\_miao](https://forum.inductiveautomation.com/u/zhetao_miao)\
**Replies:** 2\
**Last updated:** [January 30, 2025, 12:52pm UTC](https://forum.inductiveautomation.com/t/ignition-v8-1-perspective-project-cpu-overload-issue/101598 "2025-01-30T12:52:49Z")

</div>

Recently I met a strange issue on Ignition V8.1 perspective project，the CPU usage is extremely high and achieve 98%，current is 4 cores and 16GB memory, I also put screenshot in there(10 sessions at this time) May I a…

---

## [Delta AS218RX-A PLC with JMC IHSV42-40-07-24 Servo Motor - No Motion Issue](https://forum.inductiveautomation.com/t/delta-as218rx-a-plc-with-jmc-ihsv42-40-07-24-servo-motor-no-motion-issue/101607)

<div class="topic-metadata">

**Author:** [@tanas\_tanas](https://forum.inductiveautomation.com/u/tanas_tanas)\
**Replies:** 0\
**Last updated:** [January 30, 2025, 12:01pm UTC](https://forum.inductiveautomation.com/t/delta-as218rx-a-plc-with-jmc-ihsv42-40-07-24-servo-motor-no-motion-issue/101607 "2025-01-30T12:01:22Z")

</div>

I am trying to integrate a Delta AS218RX-A PLC with a JMC IHSV42-40-07-24 Integrated AC Servo Motor using ISPSoft, but I am facing issues getting the motor to move using pulse/direction control. Setup: PLC Model: Delta…

---

## [Issue with dynamic dock behavior](https://forum.inductiveautomation.com/t/issue-with-dynamic-dock-behavior/101294)

<div class="topic-metadata">

**Author:** [@Aiasa21](https://forum.inductiveautomation.com/u/Aiasa21)\
**Replies:** 6\
**Last updated:** [January 30, 2025, 12:00pm UTC](https://forum.inductiveautomation.com/t/issue-with-dynamic-dock-behavior/101294 "2025-01-30T12:00:40Z")

</div>

Good morning everyone, I am trying to implement a dynamic dock on the project I am developing. To do this, I followed suggestions from some videos and topics I found online to modify the stylesheet.css as follows: .doc…

---

## [Stratix Switch Integration](https://forum.inductiveautomation.com/t/stratix-switch-integration/45139)

<div class="topic-metadata">

**Author:** [@Dillon.lee](https://forum.inductiveautomation.com/u/Dillon.lee)\
**Replies:** 5\
**Last updated:** [January 30, 2025, 1:49am UTC](https://forum.inductiveautomation.com/t/stratix-switch-integration/45139 "2025-01-30T01:49:22Z")

</div>

My skids are running Stratix 5700 and will be moving to the Stratix 5800 shortly, however for now we can ingest them as a native device into the device tree on our Compactlogix, and I was wondering if anyone has had any …

---

## [How to Turn SQL Database Columns into Dropdown Menus in Ignition Perspective?](https://forum.inductiveautomation.com/t/how-to-turn-sql-database-columns-into-dropdown-menus-in-ignition-perspective/101531)

<div class="topic-metadata">

**Author:** [@Akshat\_P](https://forum.inductiveautomation.com/u/Akshat_P)\
**Replies:** 6\
**Last updated:** [January 29, 2025, 10:46pm UTC](https://forum.inductiveautomation.com/t/how-to-turn-sql-database-columns-into-dropdown-menus-in-ignition-perspective/101531 "2025-01-29T22:46:34Z")

</div>

I'm working with Ignition Platform 8.1.37 (b2024013011) and seeking guidance on implementing recipe management through SQL Database integration. While I've successfully implemented transactional groups for Loading and Sa…

---

## [Questions about asych calls and threads](https://forum.inductiveautomation.com/t/questions-about-asych-calls-and-threads/97633)

<div class="topic-metadata">

**Author:** [@David.Reed.Schmidt](https://forum.inductiveautomation.com/u/David.Reed.Schmidt)\
**Replies:** 9\
**Last updated:** [January 29, 2025, 10:25pm UTC](https://forum.inductiveautomation.com/t/questions-about-asych-calls-and-threads/97633 "2025-01-29T22:25:21Z")

</div>

Is there a comprehensive guide on how to maximize asynchronous calls and thread management in Ignition? I make a lot of asynchronous calls because my code crunches a lot of SQL data which can take a bit of time. I realiz…

---

## [Float Tag Rounding](https://forum.inductiveautomation.com/t/float-tag-rounding/101579)

<div class="topic-metadata">

**Author:** [@Pico\_Sankari](https://forum.inductiveautomation.com/u/Pico_Sankari)\
**Replies:** 4\
**Last updated:** [January 29, 2025, 9:46pm UTC](https://forum.inductiveautomation.com/t/float-tag-rounding/101579 "2025-01-29T21:46:18Z")

</div>

I have various query tags set up that have alarms on them. The data type is currently set to float. In my query, I round the results to 2 decimal places. However the values get stored as long slightly inaccurate floats: …

[Previous page](https://forum.inductiveautomation.com/latest.md?page=307)

[Next page](https://forum.inductiveautomation.com/latest.md?page=309)
