# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=328

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 329

---

## [Simulation Software with Ignition](https://forum.inductiveautomation.com/t/simulation-software-with-ignition/99431)

<div class="topic-metadata">

**Author:** [@Randolph\_Sewell](https://forum.inductiveautomation.com/u/Randolph_Sewell)\
**Replies:** 14\
**Last updated:** [December 28, 2024, 6:57pm UTC](https://forum.inductiveautomation.com/t/simulation-software-with-ignition/99431 "2024-12-28T18:57:20Z")

</div>

We can simulate any device values we want in the PLC and that reflects on the screen and changes the process accordingly (EX: pretending inlet flow is set at 100SCFM so the process runs like it was 100SCFM). This works g…

---

## [Power Chart \_ Database](https://forum.inductiveautomation.com/t/power-chart-database/99575)

<div class="topic-metadata">

**Author:** [@Filippos\_Onisiforou](https://forum.inductiveautomation.com/u/Filippos_Onisiforou)\
**Replies:** 1\
**Last updated:** [December 28, 2024, 4:40pm UTC](https://forum.inductiveautomation.com/t/power-chart-database/99575 "2024-12-28T16:40:58Z")

</div>

Hi Guys , i have these databases in red square and i want to remove them , because they were made by mistake and i want to delete them. These are the Logging Tags in the power Chart. thanks in advance

---

## [Ignition reporting Script: PyFloat cannot be cast to org.python.core.PySequence](https://forum.inductiveautomation.com/t/ignition-reporting-script-pyfloat-cannot-be-cast-to-org-python-core-pysequence/46173)

<div class="topic-metadata">

**Author:** [@dmiessner](https://forum.inductiveautomation.com/u/dmiessner)\
**Replies:** 5\
**Last updated:** [December 28, 2024, 8:02am UTC](https://forum.inductiveautomation.com/t/ignition-reporting-script-pyfloat-cannot-be-cast-to-org-python-core-pysequence/46173 "2024-12-28T08:02:17Z")

</div>

Hello everyone. As you can see from the title I’m having an issue with being unable to cast my data as I attempt to create a new dataset from some data that I modify from an existing dataset. Below is my code, it’s all…

---

## [Property from dataset](https://forum.inductiveautomation.com/t/property-from-dataset/100280)

<div class="topic-metadata">

**Author:** [@Nicole\_McCormack](https://forum.inductiveautomation.com/u/Nicole_McCormack)\
**Replies:** 3\
**Last updated:** [December 28, 2024, 3:08am UTC](https://forum.inductiveautomation.com/t/property-from-dataset/100280 "2024-12-28T03:08:08Z")

</div>

I assigned custom properties to my root container. I use one call to get a dataset via a named query. there are 10 columns in that dataset, I am retrieving one row of a database. I assigned additional custom properties …

---

## [NonBound data disappearing on screen changes](https://forum.inductiveautomation.com/t/nonbound-data-disappearing-on-screen-changes/100273)

<div class="topic-metadata">

**Author:** [@AUSDIV](https://forum.inductiveautomation.com/u/AUSDIV)\
**Replies:** 7\
**Last updated:** [December 27, 2024, 9:12pm UTC](https://forum.inductiveautomation.com/t/nonbound-data-disappearing-on-screen-changes/100273 "2024-12-27T21:12:05Z")

</div>

I've created a screen with a multi drop down that then prompts users to input some data. If I change screens, the drop-down selection is wiped, and any fields that had text entered into them clears out. Is there a strai…

---

## [Gateway Tag Change Script or Local Tag Change Script](https://forum.inductiveautomation.com/t/gateway-tag-change-script-or-local-tag-change-script/100275)

<div class="topic-metadata">

**Author:** [@Robert\_Thompson](https://forum.inductiveautomation.com/u/Robert_Thompson)\
**Replies:** 2\
**Last updated:** [December 27, 2024, 8:45pm UTC](https://forum.inductiveautomation.com/t/gateway-tag-change-script-or-local-tag-change-script/100275 "2024-12-27T20:45:17Z")

</div>

Is there any difference between the Gateway Event, Tag Change and the Script function on a tag for value change? I see the Gateway Event can be configured for several items including tag change. I'm just wondering if I…

---

## [On cell click possible in Perspective Table](https://forum.inductiveautomation.com/t/on-cell-click-possible-in-perspective-table/100254)

<div class="topic-metadata">

**Author:** [@Alejandro\_Alaco](https://forum.inductiveautomation.com/u/Alejandro_Alaco)\
**Replies:** 1\
**Last updated:** [December 27, 2024, 7:47pm UTC](https://forum.inductiveautomation.com/t/on-cell-click-possible-in-perspective-table/100254 "2024-12-27T19:47:33Z")

</div>

Hello! It is possible to do On Cell Click in Ignition Perspective? I want this to show a popup with data for that specific cell. If not would it be possbible do so with onRowClick combining row info and column info? C…

---

## [How to read the cell value from the table column, which has render type as view](https://forum.inductiveautomation.com/t/how-to-read-the-cell-value-from-the-table-column-which-has-render-type-as-view/99791)

<div class="topic-metadata">

**Author:** [@kavya\_shree](https://forum.inductiveautomation.com/u/kavya_shree)\
**Replies:** 19\
**Last updated:** [December 27, 2024, 3:39pm UTC](https://forum.inductiveautomation.com/t/how-to-read-the-cell-value-from-the-table-column-which-has-render-type-as-view/99791 "2024-12-27T15:39:53Z")

</div>

Hi Team, I have table of 3 columns with filled data, 4th column I added as pseudo column from named query(no data). I this 4th column I want to add CheckBox/Toggle in each row. User can operates on each row and and the…

---

## [Ignition secure connection with ssl/tls](https://forum.inductiveautomation.com/t/ignition-secure-connection-with-ssl-tls/100228)

<div class="topic-metadata">

**Author:** [@Ahmed\_badawi1](https://forum.inductiveautomation.com/u/Ahmed_badawi1)\
**Replies:** 3\
**Last updated:** [December 27, 2024, 2:02pm UTC](https://forum.inductiveautomation.com/t/ignition-secure-connection-with-ssl-tls/100228 "2024-12-27T14:02:32Z")

</div>

Hi, is it ok in ignition to generate my own ssl/tls certificate to use it in my gateway or i should have a CA to generate it

---

## [High Performance Historian](https://forum.inductiveautomation.com/t/high-performance-historian/100220)

<div class="topic-metadata">

**Author:** [@dtompkins](https://forum.inductiveautomation.com/u/dtompkins)\
**Replies:** 10\
**Last updated:** [December 27, 2024, 1:51pm UTC](https://forum.inductiveautomation.com/t/high-performance-historian/100220 "2024-12-27T13:51:22Z")

</div>

We are scaling out or ignition deployment. We have 650K tags and are on track for 2M in the next year, with about 5% historical. I am seeking advice on how best to organize the historian. My current thought is that mu…

---

## [Pass Array of Tag Paths to Template Repeater](https://forum.inductiveautomation.com/t/pass-array-of-tag-paths-to-template-repeater/100173)

<div class="topic-metadata">

**Author:** [@Jose\_Lino](https://forum.inductiveautomation.com/u/Jose_Lino)\
**Replies:** 10\
**Last updated:** [December 27, 2024, 1:15pm UTC](https://forum.inductiveautomation.com/t/pass-array-of-tag-paths-to-template-repeater/100173 "2024-12-27T13:15:08Z")

</div>

Hi everyone! I’m working on a project in Ignition and could use some advice. I have multiple screens with numerous setpoints, but instead of having the screens with all the setpoints, I’d like to create a popup that dyn…

---

## [Duplicate alarm being triggered and sent the same time](https://forum.inductiveautomation.com/t/duplicate-alarm-being-triggered-and-sent-the-same-time/100219)

<div class="topic-metadata">

**Author:** [@Zied\_Brahmi](https://forum.inductiveautomation.com/u/Zied_Brahmi)\
**Replies:** 2\
**Last updated:** [December 27, 2024, 11:49am UTC](https://forum.inductiveautomation.com/t/duplicate-alarm-being-triggered-and-sent-the-same-time/100219 "2024-12-27T11:49:31Z")

</div>

Hello forum, I m having weird behaviour, generally everything works well, alarm conditions triggers and an email will be sent through the pipeline, sometimes weirdly the same alarm triggers 3 alarms at the same time wi…

---

## [User menu privileges](https://forum.inductiveautomation.com/t/user-menu-privileges/100098)

<div class="topic-metadata">

**Author:** [@Alejandro\_Alaco](https://forum.inductiveautomation.com/u/Alejandro_Alaco)\
**Replies:** 2\
**Last updated:** [December 27, 2024, 9:58am UTC](https://forum.inductiveautomation.com/t/user-menu-privileges/100098 "2024-12-27T09:58:03Z")

</div>

Hello! At the moment when the user access the project is enabled to use some parts of the menu. so if not enable appear the prohibited icon on rollover I did it enabling those parts from numbers in the user note…

---

## [Numeric Entry Text Position and style format](https://forum.inductiveautomation.com/t/numeric-entry-text-position-and-style-format/48911)

<div class="topic-metadata">

**Author:** [@franklepkowski](https://forum.inductiveautomation.com/u/franklepkowski)\
**Replies:** 8\
**Last updated:** [December 27, 2024, 2:09am UTC](https://forum.inductiveautomation.com/t/numeric-entry-text-position-and-style-format/48911 "2024-12-27T02:09:54Z")

</div>

Hello All, A couple items on this. Why is there no center value in the enumuration for align for a numeric entry field? Why does the align not inherit from the style class assigned to the numeric entry field? Is there…

---

## [\[BUG -12995\] Not able to add templates to a vision Window](https://forum.inductiveautomation.com/t/bug-12995-not-able-to-add-templates-to-a-vision-window/23021)

<div class="topic-metadata">

**Author:** [@Sanderd17](https://forum.inductiveautomation.com/u/Sanderd17)\
**Replies:** 4\
**Last updated:** [December 26, 2024, 3:35pm UTC](https://forum.inductiveautomation.com/t/bug-12995-not-able-to-add-templates-to-a-vision-window/23021 "2024-12-26T15:35:26Z")

</div>

I just had some time to try a new version (on b2019030102 now), and apparently, I can’t add templates to the windows or other templates. I’ve tried it both on the “global” project and a specific project. When I drag-and…

---

## [Www.inductiveautomation.com is kinda slow](https://forum.inductiveautomation.com/t/www-inductiveautomation-com-is-kinda-slow/100132)

<div class="topic-metadata">

**Author:** [@bmusson](https://forum.inductiveautomation.com/u/bmusson)\
**Replies:** 3\
**Last updated:** [December 26, 2024, 12:53pm UTC](https://forum.inductiveautomation.com/t/www-inductiveautomation-com-is-kinda-slow/100132 "2024-12-26T12:53:54Z")

</div>

Moving around inductiveautomation.com is not a very fast experience. It takes about 5-10 seconds to load each page, and shows a white blank screen between each navigation event. 1Gbps Fiber (Altafiber ISP), Midwest USA …

---

## [Duplicate Alarm Notifications](https://forum.inductiveautomation.com/t/duplicate-alarm-notifications/53358)

<div class="topic-metadata">

**Author:** [@jacob.ramirez](https://forum.inductiveautomation.com/u/jacob.ramirez)\
**Replies:** 9\
**Last updated:** [December 26, 2024, 12:38pm UTC](https://forum.inductiveautomation.com/t/duplicate-alarm-notifications/53358 "2024-12-26T12:38:46Z")

</div>

Can anyone help point me where else to look as to why I am receiving 2 alarm notification emails instead of 1? I made sure that there is one notification block in the pipeline I’m only listed once on the roster I only …

---

## [Perspective Table binding](https://forum.inductiveautomation.com/t/perspective-table-binding/100206)

<div class="topic-metadata">

**Author:** [@Tokyo\_mht](https://forum.inductiveautomation.com/u/Tokyo_mht)\
**Replies:** 4\
**Last updated:** [December 26, 2024, 10:24am UTC](https://forum.inductiveautomation.com/t/perspective-table-binding/100206 "2024-12-26T10:24:03Z")

</div>

I have a table in a perspective view where i will be creating some data but asynchronously, which may take time. To ensure the table updates dynamically , I added Now() in the data binding and fetched table data usin…

---

## [Perspective Radio Button](https://forum.inductiveautomation.com/t/perspective-radio-button/100207)

<div class="topic-metadata">

**Author:** [@pkhoshroo](https://forum.inductiveautomation.com/u/pkhoshroo)\
**Replies:** 1\
**Last updated:** [December 25, 2024, 7:54pm UTC](https://forum.inductiveautomation.com/t/perspective-radio-button/100207 "2024-12-25T19:54:53Z")

</div>

Hello all I’m trying to use radio buttons in Perspective, but I’m running into some challenges. Here’s my setup: I have 8 string tags in my PLC. Each tag may or may not contain a string. The goal is to display a radio …

---

## [Authentication in Association of 61850 Client - Server Communication using weak password](https://forum.inductiveautomation.com/t/authentication-in-association-of-61850-client-server-communication-using-weak-password/100205)

<div class="topic-metadata">

**Author:** [@Raghuram\_Chundi](https://forum.inductiveautomation.com/u/Raghuram_Chundi)\
**Replies:** 0\
**Last updated:** [December 25, 2024, 1:52pm UTC](https://forum.inductiveautomation.com/t/authentication-in-association-of-61850-client-server-communication-using-weak-password/100205 "2024-12-25T13:52:43Z")

</div>

Hi All, I am looking for 61850 Client and Server connection establishment configuration support in both Client and Server. This I need using Weak Password. I am looking at the standards but didn't find how to set a pass…

---

## [Get all the vertices from a general path](https://forum.inductiveautomation.com/t/get-all-the-vertices-from-a-general-path/100184)

<div class="topic-metadata">

**Author:** [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\
**Replies:** 2\
**Last updated:** [December 25, 2024, 3:39am UTC](https://forum.inductiveautomation.com/t/get-all-the-vertices-from-a-general-path/100184 "2024-12-25T03:39:31Z")

</div>

I'm working with a PathBasedVisionShape. I want to get the coordinates for all of the points on the line. It doesn't matter if the coordinates are relative to the shape object or the container. I can get the general pat…

---

## [Occasional problems that occur when sending an email](https://forum.inductiveautomation.com/t/occasional-problems-that-occur-when-sending-an-email/100146)

<div class="topic-metadata">

**Author:** [@jchen](https://forum.inductiveautomation.com/u/jchen)\
**Replies:** 8\
**Last updated:** [December 25, 2024, 4:58am UTC](https://forum.inductiveautomation.com/t/occasional-problems-that-occur-when-sending-an-email/100146 "2024-12-25T04:58:20Z")

</div>

Hi there, I have a daily E-mail send by ignition every day, most time it works normal, but occasionally, there are the following alarms that cause the sending to fail. The server system status is below: Can anyon…

---

## [Designer Launcher could not load the project](https://forum.inductiveautomation.com/t/designer-launcher-could-not-load-the-project/100180)

<div class="topic-metadata">

**Author:** [@bb\_ss](https://forum.inductiveautomation.com/u/bb_ss)\
**Replies:** 9\
**Last updated:** [December 24, 2024, 7:40pm UTC](https://forum.inductiveautomation.com/t/designer-launcher-could-not-load-the-project/100180 "2024-12-24T19:40:54Z")

</div>

Need help! I could not open the ignition project with Designer Launcher, it always stop at 83%, restarted the laptop and it is the same. show "Download attempt #2 for file security-8.1.43.jar failed." in Launch\_error. …

---

## [Write Value into tag with if condition](https://forum.inductiveautomation.com/t/write-value-into-tag-with-if-condition/100157)

<div class="topic-metadata">

**Author:** [@Nicolas\_Glienke](https://forum.inductiveautomation.com/u/Nicolas_Glienke)\
**Replies:** 12\
**Last updated:** [December 24, 2024, 5:55pm UTC](https://forum.inductiveautomation.com/t/write-value-into-tag-with-if-condition/100157 "2024-12-24T17:55:37Z")

</div>

Hello all, I am trying to write the value of a tag into another tag if a condition is fulfilled. I cannot seem to get it to work. Background: I have 8 MQTT Brokers that send data with the same topic. To split their sig…

---

## [Size of DateTimeInput](https://forum.inductiveautomation.com/t/size-of-datetimeinput/80415)

<div class="topic-metadata">

**Author:** [@Vidar\_Hetlelid](https://forum.inductiveautomation.com/u/Vidar_Hetlelid)\
**Replies:** 11\
**Last updated:** [December 24, 2024, 5:23pm UTC](https://forum.inductiveautomation.com/t/size-of-datetimeinput/80415 "2024-12-24T17:23:48Z")

</div>

Hi there, Is it possible to change the size of DateTimeInput component?

---

## [Redundancy with Persistent Records](https://forum.inductiveautomation.com/t/redundancy-with-persistent-records/100194)

<div class="topic-metadata">

**Author:** [@e.sagnelonge](https://forum.inductiveautomation.com/u/e.sagnelonge)\
**Replies:** 1\
**Last updated:** [December 24, 2024, 2:00pm UTC](https://forum.inductiveautomation.com/t/redundancy-with-persistent-records/100194 "2024-12-24T14:00:08Z")

</div>

Hello, I am currently working on the redundancy of a module. In this module, I store data in a table within the internaldb (via persistent records). These records are editable from the client during operation (compone…

---

## [Dynamic reports using Ignition reporting module](https://forum.inductiveautomation.com/t/dynamic-reports-using-ignition-reporting-module/100166)

<div class="topic-metadata">

**Author:** [@dhananjay\_vichare](https://forum.inductiveautomation.com/u/dhananjay_vichare)\
**Replies:** 2\
**Last updated:** [December 24, 2024, 1:22pm UTC](https://forum.inductiveautomation.com/t/dynamic-reports-using-ignition-reporting-module/100166 "2024-12-24T13:22:51Z")

</div>

I would like to create dynamic report using Reporting module. Similar to the Ad-hoc chart, instead of chart component, I would like report table there. I am using 8.1.43. I have tag browser tree component from which I a…

---

## [How can add # user with role in usersource with 1 click?](https://forum.inductiveautomation.com/t/how-can-add-user-with-role-in-usersource-with-1-click/100193)

<div class="topic-metadata">

**Author:** [@chirag\_kotadiya](https://forum.inductiveautomation.com/u/chirag_kotadiya)\
**Replies:** 0\
**Last updated:** [December 24, 2024, 11:25am UTC](https://forum.inductiveautomation.com/t/how-can-add-user-with-role-in-usersource-with-1-click/100193 "2024-12-24T11:25:36Z")

</div>

Dear all, As per our current scenario, we have a two projects and two user sources, let me explain with an example for better understanding. Two projects \> 1) Project is – Gujarat and its user source is \> GUJ (via int…

---

## [Nudging shape vertices](https://forum.inductiveautomation.com/t/nudging-shape-vertices/33192)

<div class="topic-metadata">

**Author:** [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Replies:** 1\
**Last updated:** [December 24, 2024, 3:21am UTC](https://forum.inductiveautomation.com/t/nudging-shape-vertices/33192 "2024-12-24T03:21:31Z")

</div>

It would be great if we could use the keyboard arrows to nudge shape vertices rather than having to use the mouse. It’s nearly impossible (if not impossible) to get your points exactly lined up. It would also be nice to …

---

## [Select PIN from database?](https://forum.inductiveautomation.com/t/select-pin-from-database/100181)

<div class="topic-metadata">

**Author:** [@JVeldt](https://forum.inductiveautomation.com/u/JVeldt)\
**Replies:** 2\
**Last updated:** [December 24, 2024, 12:57am UTC](https://forum.inductiveautomation.com/t/select-pin-from-database/100181 "2024-12-24T00:57:42Z")

</div>

Hello, I have a database with a table that has PIN numbers as one of the columns. I'm trying to have it so when an employee enters a pin number on a keypad they are granted access to a door. I have an OPC tag for acces…

[Previous page](https://forum.inductiveautomation.com/latest.md?page=327)

[Next page](https://forum.inductiveautomation.com/latest.md?page=329)
