# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=337

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 338

---

## [Animate Fill Level On Irregular Shaped Component](https://forum.inductiveautomation.com/t/animate-fill-level-on-irregular-shaped-component/15740)

<div class="topic-metadata">

**Author:** [@Bob\_O](https://forum.inductiveautomation.com/u/Bob_O)\
**Replies:** 6\
**Last updated:** [December 9, 2024, 10:40pm UTC](https://forum.inductiveautomation.com/t/animate-fill-level-on-irregular-shaped-component/15740 "2024-12-09T22:40:23Z")

</div>

Just started to work with IA and have a simple question. I have an irregular shaped component that is representing multiple level lift station. I'm wanting to animate the fill color to show water level based on the value…

---

## [Transaction Group Trigger](https://forum.inductiveautomation.com/t/transaction-group-trigger/85707)

<div class="topic-metadata">

**Author:** [@jmr](https://forum.inductiveautomation.com/u/jmr)\
**Replies:** 6\
**Last updated:** [December 9, 2024, 6:07pm UTC](https://forum.inductiveautomation.com/t/transaction-group-trigger/85707 "2024-12-09T18:07:02Z")

</div>

Issue with duplicate writes to database and triggered tag has not changed. I am monitoring production benders and want to write the partno, Cycle time, and a few other variables to the database when the part count incre…

---

## [CA Signed Ignition Module - Says it is self signed](https://forum.inductiveautomation.com/t/ca-signed-ignition-module-says-it-is-self-signed/99609)

<div class="topic-metadata">

**Author:** [@j.israelsen](https://forum.inductiveautomation.com/u/j.israelsen)\
**Replies:** 1\
**Last updated:** [December 9, 2024, 10:21pm UTC](https://forum.inductiveautomation.com/t/ca-signed-ignition-module-says-it-is-self-signed/99609 "2024-12-09T22:21:58Z")

</div>

This post is similar to one previous, namely: CA Signed Module Says Self Signed Here is where I am at: I followed the steps for signing as outlined here: Signing with HSM I was able to successfully sign the modul…

---

## [Perspective component get dropdown props from gateway](https://forum.inductiveautomation.com/t/perspective-component-get-dropdown-props-from-gateway/99606)

<div class="topic-metadata">

**Author:** [@Grace\_Gan](https://forum.inductiveautomation.com/u/Grace_Gan)\
**Replies:** 5\
**Last updated:** [December 9, 2024, 9:37pm UTC](https://forum.inductiveautomation.com/t/perspective-component-get-dropdown-props-from-gateway/99606 "2024-12-09T21:37:38Z")

</div>

Hi, I want to create a perspective component with a input\_datapoint\_id property which a list of items will be provided as dropdown to select a single value. If my dropdown list is fixed I can do this { "type": "obje…

---

## [Perspective Workstation Performance](https://forum.inductiveautomation.com/t/perspective-workstation-performance/89332)

<div class="topic-metadata">

**Author:** [@William\_Coffey](https://forum.inductiveautomation.com/u/William_Coffey)\
**Replies:** 4\
**Last updated:** [December 9, 2024, 8:49pm UTC](https://forum.inductiveautomation.com/t/perspective-workstation-performance/89332 "2024-12-09T20:49:12Z")

</div>

Hi gurus, I've been working on a fairly large Ignition Perspective project for a customer of ours and I am now in the testing phase. To date I have been working in the designer and Chrome Browser and i am happy with the…

---

## [TimeSeries Chart not live updating with dataset from Gateway tag?](https://forum.inductiveautomation.com/t/timeseries-chart-not-live-updating-with-dataset-from-gateway-tag/99601)

<div class="topic-metadata">

**Author:** [@bkarabinchak.psi](https://forum.inductiveautomation.com/u/bkarabinchak.psi)\
**Replies:** 1\
**Last updated:** [December 9, 2024, 9:14pm UTC](https://forum.inductiveautomation.com/t/timeseries-chart-not-live-updating-with-dataset-from-gateway-tag/99601 "2024-12-09T21:14:22Z")

</div>

Using 8.1.43. I have a gateway dataset query tag that runs every 30 seconds. It queries all my data but I only want to show one plot at a time (since the ranges vary differently I can't plot it all together). I have t…

---

## [Tab "x" button while in run mode](https://forum.inductiveautomation.com/t/tab-x-button-while-in-run-mode/99604)

<div class="topic-metadata">

**Author:** [@Farhan\_Basheer](https://forum.inductiveautomation.com/u/Farhan_Basheer)\
**Replies:** 1\
**Last updated:** [December 9, 2024, 8:47pm UTC](https://forum.inductiveautomation.com/t/tab-x-button-while-in-run-mode/99604 "2024-12-09T20:47:10Z")

</div>

How can I get this "x" button on tab in the run mode. Currently I can only see it in design mode not in run mode.

---

## [Script seems to run both if and else statements](https://forum.inductiveautomation.com/t/script-seems-to-run-both-if-and-else-statements/99541)

<div class="topic-metadata">

**Author:** [@Daniel\_Berven](https://forum.inductiveautomation.com/u/Daniel_Berven)\
**Replies:** 5\
**Last updated:** [December 9, 2024, 8:45pm UTC](https://forum.inductiveautomation.com/t/script-seems-to-run-both-if-and-else-statements/99541 "2024-12-09T20:45:50Z")

</div>

I have a script that is supposed to take a work order number and check whether it already exists in an SQL table. If it doesn't, it performs an insert query. Otherwise, it sets some tags that create a pop up warning on a…

---

## [Perspective component not interactive on Designer View](https://forum.inductiveautomation.com/t/perspective-component-not-interactive-on-designer-view/99603)

<div class="topic-metadata">

**Author:** [@Grace\_Gan](https://forum.inductiveautomation.com/u/Grace_Gan)\
**Replies:** 4\
**Last updated:** [December 9, 2024, 8:28pm UTC](https://forum.inductiveautomation.com/t/perspective-component-not-interactive-on-designer-view/99603 "2024-12-09T20:28:25Z")

</div>

Hi, I have a relatively simple custom perspective component that consist of a dropdown at the moment. However, once I drag the component to a view, even though it gets added, it's not interactive at all, i.e. i can't se…

---

## [Import ignition tag directly from plc and still showing as bad](https://forum.inductiveautomation.com/t/import-ignition-tag-directly-from-plc-and-still-showing-as-bad/99598)

<div class="topic-metadata">

**Author:** [@michael.black](https://forum.inductiveautomation.com/u/michael.black)\
**Replies:** 15\
**Last updated:** [December 9, 2024, 8:00pm UTC](https://forum.inductiveautomation.com/t/import-ignition-tag-directly-from-plc-and-still-showing-as-bad/99598 "2024-12-09T20:00:02Z")

</div>

I have four tags which I have added. They are all Boolean tags. The values of all of them show up as Bad in red. The quality also shows Bad but its in black. When I hover over the quality the popup actually shows Goo…

---

## [If you could attend an Ignition Training in any time zone, or in any language, what would you choose?](https://forum.inductiveautomation.com/t/if-you-could-attend-an-ignition-training-in-any-time-zone-or-in-any-language-what-would-you-choose/99602)

<div class="topic-metadata">

**Author:** [@kvane](https://forum.inductiveautomation.com/u/kvane)\
**Replies:** 0\
**Last updated:** [December 9, 2024, 7:54pm UTC](https://forum.inductiveautomation.com/t/if-you-could-attend-an-ignition-training-in-any-time-zone-or-in-any-language-what-would-you-choose/99602 "2024-12-09T19:54:25Z")

</div>

Hey Ignition Nation, Currently Inductive Automation teaches training classes in-person and virtually out of Folsom, California (and virtually out of Brisbane for Australia) meaning the majority of Ignition training is i…

---

## [User definable function](https://forum.inductiveautomation.com/t/user-definable-function/99547)

<div class="topic-metadata">

**Author:** [@dick.willis](https://forum.inductiveautomation.com/u/dick.willis)\
**Replies:** 3\
**Last updated:** [December 9, 2024, 7:25pm UTC](https://forum.inductiveautomation.com/t/user-definable-function/99547 "2024-12-09T19:25:29Z")

</div>

We are trying to build a self-serve tool for form-building. We are starting with the Forms project from the Exchange. We want the person who is the form-designer to be able to create a list of questions, and then for e…

---

## [Couldn't find any versions for "@inductiveautomation/perspective-drawing-common" that matches "2.1.99"](https://forum.inductiveautomation.com/t/couldnt-find-any-versions-for-inductiveautomation-perspective-drawing-common-that-matches-2-1-99/99571)

<div class="topic-metadata">

**Author:** [@Grace\_Gan](https://forum.inductiveautomation.com/u/Grace_Gan)\
**Replies:** 2\
**Last updated:** [December 9, 2024, 7:01pm UTC](https://forum.inductiveautomation.com/t/couldnt-find-any-versions-for-inductiveautomation-perspective-drawing-common-that-matches-2-1-99/99571 "2024-12-09T19:01:13Z")

</div>

Hi, I cloned the ignition-sdk-example and build the perspective-component example and everything worked fine. I then created my own module that attempt to register a simple perspective component. What i did is pretty mu…

---

## [Named query parameter's string limit](https://forum.inductiveautomation.com/t/named-query-parameters-string-limit/99586)

<div class="topic-metadata">

**Author:** [@vrautomation](https://forum.inductiveautomation.com/u/vrautomation)\
**Replies:** 8\
**Last updated:** [December 9, 2024, 6:47pm UTC](https://forum.inductiveautomation.com/t/named-query-parameters-string-limit/99586 "2024-12-09T18:47:29Z")

</div>

Hello everyone, We use a named query to store data in a SQL Server table. We store a JSON containing multiple values in varchar(max) field. At some point, the json is truncated. Since a varchar(max) have a limit of 2 G…

---

## [Long last stored procedure execution in ignition](https://forum.inductiveautomation.com/t/long-last-stored-procedure-execution-in-ignition/99569)

<div class="topic-metadata">

**Author:** [@apimente](https://forum.inductiveautomation.com/u/apimente)\
**Replies:** 3\
**Last updated:** [December 9, 2024, 6:04pm UTC](https://forum.inductiveautomation.com/t/long-last-stored-procedure-execution-in-ignition/99569 "2024-12-09T18:04:19Z")

</div>

Hi everyone, I need to execute a stored procedure that takes approximately 30 minutes to complete. I'm looking for the best approach to handle this while avoiding system hang-ups. One option I’m considering is creating…

---

## [Search for "%/%" doesn't work](https://forum.inductiveautomation.com/t/search-for-doesnt-work/99596)

<div class="topic-metadata">

**Author:** [@Ryan\_Deardorff](https://forum.inductiveautomation.com/u/Ryan_Deardorff)\
**Replies:** 3\
**Last updated:** [December 9, 2024, 5:46pm UTC](https://forum.inductiveautomation.com/t/search-for-doesnt-work/99596 "2024-12-09T17:46:15Z")

</div>

I'm trying to find instances of the string "%/%" in a project, but those % seem to be treated like a wildcard. I tried escaping with \\ but that doesn't work. How can I find instances of that character?

---

## [Troubleshooting Modbus Timeout](https://forum.inductiveautomation.com/t/troubleshooting-modbus-timeout/99595)

<div class="topic-metadata">

**Author:** [@Marshall\_Tickner](https://forum.inductiveautomation.com/u/Marshall_Tickner)\
**Replies:** 1\
**Last updated:** [December 9, 2024, 5:19pm UTC](https://forum.inductiveautomation.com/t/troubleshooting-modbus-timeout/99595 "2024-12-09T17:19:26Z")

</div>

Any advice for chasing down warnings like the ones here? The device reads data fine most of the time but occasionally will throw one of these warnings.

---

## [Dynamic Alarm Setpoint not Updating Quickly](https://forum.inductiveautomation.com/t/dynamic-alarm-setpoint-not-updating-quickly/99494)

<div class="topic-metadata">

**Author:** [@andytimc](https://forum.inductiveautomation.com/u/andytimc)\
**Replies:** 10\
**Last updated:** [December 9, 2024, 3:02pm UTC](https://forum.inductiveautomation.com/t/dynamic-alarm-setpoint-not-updating-quickly/99494 "2024-12-09T15:02:51Z")

</div>

I am trying to use a Dynamic Setpoint to Trigger an Alarm and it does not update the setpoint as quick as I need it to. Below is what i am doing. I have a UDT for a Flow Meter and a UDT for a Combustor. If the combust…

---

## [Integrating Ignition with Triangle Microworks Scada Data Gateway](https://forum.inductiveautomation.com/t/integrating-ignition-with-triangle-microworks-scada-data-gateway/99583)

<div class="topic-metadata">

**Author:** [@Marshall\_Tickner](https://forum.inductiveautomation.com/u/Marshall_Tickner)\
**Replies:** 1\
**Last updated:** [December 9, 2024, 2:40pm UTC](https://forum.inductiveautomation.com/t/integrating-ignition-with-triangle-microworks-scada-data-gateway/99583 "2024-12-09T14:40:23Z")

</div>

Has anyone had experience using Triangle Microworks SCADA Data Gateway? We are currently using an Ignition edge gateway to communicate with a SISCO server in order to communicate to ISOs over ICCP. According to what I ha…

---

## [\[IGN-4521, IGN-4522\] Login "fails" when using Auth0 IDP...but not when you retry](https://forum.inductiveautomation.com/t/ign-4521-ign-4522-login-fails-when-using-auth0-idp-but-not-when-you-retry/46920)

<div class="topic-metadata">

**Author:** [@dpitzer](https://forum.inductiveautomation.com/u/dpitzer)\
**Replies:** 10\
**Last updated:** [December 9, 2024, 1:27pm UTC](https://forum.inductiveautomation.com/t/ign-4521-ign-4522-login-fails-when-using-auth0-idp-but-not-when-you-retry/46920 "2024-12-09T13:27:12Z")

</div>

I am using Auth0 as my IDP. Most of the time, when logging in to the Gateway, Designer, or a project, I am successfully redirected to Auth0 where I can successfully log in and am redirected back to Ignition. However, whe…

---

## [Leased Tag - Need slower OPC UA Subscription Interval when lease is inactive](https://forum.inductiveautomation.com/t/leased-tag-need-slower-opc-ua-subscription-interval-when-lease-is-inactive/99184)

<div class="topic-metadata">

**Author:** [@Trond\_Iversen](https://forum.inductiveautomation.com/u/Trond_Iversen)\
**Replies:** 26\
**Last updated:** [December 9, 2024, 12:56pm UTC](https://forum.inductiveautomation.com/t/leased-tag-need-slower-opc-ua-subscription-interval-when-lease-is-inactive/99184 "2024-12-09T12:56:34Z")

</div>

Dear All, In tag Group Editor, using OPC UA "Publishing Interval" default value of -1.0 for a Leased tag results in the interval being limited upwards to 1000ms, which is too fast for my needs. Specifically what happen…

---

## [Can you define a tag DataType by a paramter in a UDT?](https://forum.inductiveautomation.com/t/can-you-define-a-tag-datatype-by-a-paramter-in-a-udt/99577)

<div class="topic-metadata">

**Author:** [@danielps1818](https://forum.inductiveautomation.com/u/danielps1818)\
**Replies:** 6\
**Last updated:** [December 9, 2024, 12:27pm UTC](https://forum.inductiveautomation.com/t/can-you-define-a-tag-datatype-by-a-paramter-in-a-udt/99577 "2024-12-09T12:27:15Z")

</div>

I have an UDT. Alarm CurrentValue ActivateValue isActive I need that same UDT with type Boolean, Integer and Double for CurrentValue and ActivateValue. Could I usa a parameter to define that datatype? Th…

---

## [Write to UDT Instance parameter through GW network](https://forum.inductiveautomation.com/t/write-to-udt-instance-parameter-through-gw-network/99526)

<div class="topic-metadata">

**Author:** [@andreas](https://forum.inductiveautomation.com/u/andreas)\
**Replies:** 2\
**Last updated:** [December 9, 2024, 7:48am UTC](https://forum.inductiveautomation.com/t/write-to-udt-instance-parameter-through-gw-network/99526 "2024-12-09T07:48:29Z")

</div>

Hi, We have a test environment with a standard Ignition GW and an Edge GW connected through a GW network. When trying to write to a UDT Instance parameter on the Edge GW from the standard Gateway, we just get \[Bad\_Acce…

---

## [FTP Client Speed via Scripting](https://forum.inductiveautomation.com/t/ftp-client-speed-via-scripting/26620)

<div class="topic-metadata">

**Author:** [@r.huisken](https://forum.inductiveautomation.com/u/r.huisken)\
**Replies:** 12\
**Last updated:** [December 9, 2024, 4:34am UTC](https://forum.inductiveautomation.com/t/ftp-client-speed-via-scripting/26620 "2024-12-09T04:34:13Z")

</div>

I am connecting to HMI’s and robots using python ftplib. I am able to upload/download files. The files are typically less than 10KB, the biggest is about 150KB. The problem I have is it takes about 4.5 seconds per ftp re…

---

## [Warning message in CONSOLE](https://forum.inductiveautomation.com/t/warning-message-in-console/10511)

<div class="topic-metadata">

**Author:** [@Fabrice\_CHAVEROT](https://forum.inductiveautomation.com/u/Fabrice_CHAVEROT)\
**Replies:** 4\
**Last updated:** [December 8, 2024, 11:53pm UTC](https://forum.inductiveautomation.com/t/warning-message-in-console/10511 "2024-12-08T23:53:46Z")

</div>

I have this message in the console each time the scan class linked with my OPC DA server: 15:10:11 COMSubscription \[\_READWRITESUB\_\] Failed to add 1 items to the subscription- error codes were returned from the OPC se…

---

## [SQL Queries and Time Differences](https://forum.inductiveautomation.com/t/sql-queries-and-time-differences/99392)

<div class="topic-metadata">

**Author:** [@WildeKurt](https://forum.inductiveautomation.com/u/WildeKurt)\
**Replies:** 1\
**Last updated:** [December 8, 2024, 11:42am UTC](https://forum.inductiveautomation.com/t/sql-queries-and-time-differences/99392 "2024-12-08T11:42:08Z")

</div>

A particular gateway I'm working with is giving odd results when returning queries that contain a time type. When I make the query in SSMS (this is MS SQL) the times retuned are correct although they have a date compone…

---

## [Encoding German characters calling a REST API](https://forum.inductiveautomation.com/t/encoding-german-characters-calling-a-rest-api/99554)

<div class="topic-metadata">

**Author:** [@Rene\_Ries](https://forum.inductiveautomation.com/u/Rene_Ries)\
**Replies:** 4\
**Last updated:** [December 8, 2024, 10:58am UTC](https://forum.inductiveautomation.com/t/encoding-german-characters-calling-a-rest-api/99554 "2024-12-08T10:58:13Z")

</div>

Hi, I'm brandnew to Ignition Perspective and I'm testing requirements we had before using Android programming. I try to send data to a REST API hosted on a OPC-Router. I use system.net.httpPost like you can see in my …

---

## [Component META Name Binding Issues](https://forum.inductiveautomation.com/t/component-meta-name-binding-issues/99448)

<div class="topic-metadata">

**Author:** [@Emmanuel\_Dupart](https://forum.inductiveautomation.com/u/Emmanuel_Dupart)\
**Replies:** 1\
**Last updated:** [December 7, 2024, 10:25pm UTC](https://forum.inductiveautomation.com/t/component-meta-name-binding-issues/99448 "2024-12-07T22:25:34Z")

</div>

I'm using Expression to bind the META name of various components on my screen to the ".labelDisplay" property of the label that component is associated (along w/ additional text). However, for some reason, whenever I re…

---

## [Where can I learn how to use Basic drawing like lines, squares and etc.?](https://forum.inductiveautomation.com/t/where-can-i-learn-how-to-use-basic-drawing-like-lines-squares-and-etc/99557)

<div class="topic-metadata">

**Author:** [@Farzad\_Soudbakhsh](https://forum.inductiveautomation.com/u/Farzad_Soudbakhsh)\
**Replies:** 3\
**Last updated:** [December 7, 2024, 7:52pm UTC](https://forum.inductiveautomation.com/t/where-can-i-learn-how-to-use-basic-drawing-like-lines-squares-and-etc/99557 "2024-12-07T19:52:11Z")

</div>

Hello, I can't see basic drawings in the Ignition Designer. Please let me know if using basic drawing in Ignition Designer is possible. If it is, please direct me to a video or instructions on how to do it. Thank you

---

## [Same Gateway, different Server - DRV table entry?](https://forum.inductiveautomation.com/t/same-gateway-different-server-drv-table-entry/99534)

<div class="topic-metadata">

**Author:** [@justin.huggins](https://forum.inductiveautomation.com/u/justin.huggins)\
**Replies:** 2\
**Last updated:** [December 7, 2024, 5:04pm UTC](https://forum.inductiveautomation.com/t/same-gateway-different-server-drv-table-entry/99534 "2024-12-07T17:04:33Z")

</div>

We are currently going to a new OS for our Windows Server. Our process is building out a brand new gateway on the new server and once ready, we are going to power down the old server then power up the server. We have p…

[Previous page](https://forum.inductiveautomation.com/latest.md?page=336)

[Next page](https://forum.inductiveautomation.com/latest.md?page=338)
