# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=386

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 387

---

## [S7-400 UDT STRING addressing](https://forum.inductiveautomation.com/t/s7-400-udt-string-addressing/96375)

<div class="topic-metadata">

**Author:** [@Attila\_Lazok](https://forum.inductiveautomation.com/u/Attila_Lazok)\
**Replies:** 4\
**Last updated:** [September 25, 2024, 10:14pm UTC](https://forum.inductiveautomation.com/t/s7-400-udt-string-addressing/96375 "2024-09-25T22:14:26Z")

</div>

Hello all, I am addressing a UDT in a Siemens S7-400 PLC. My Ignition UDT is working great with all other type of tags, but I am having Issues with getting a STRING tag to work. The Siemens UDT looks like this: The …

---

## [Any experience with connecting SEL to Ignition](https://forum.inductiveautomation.com/t/any-experience-with-connecting-sel-to-ignition/96441)

<div class="topic-metadata">

**Author:** [@Brian\_McClure](https://forum.inductiveautomation.com/u/Brian_McClure)\
**Replies:** 5\
**Last updated:** [September 25, 2024, 9:03pm UTC](https://forum.inductiveautomation.com/t/any-experience-with-connecting-sel-to-ignition/96441 "2024-09-25T21:03:13Z")

</div>

We are looking into switching vendors for our scada system and Ignition is high on our list. I am actually going through the intro course that is online just to get my feet wet. The DNP 3 section was very limited, and th…

---

## [Security levels and zone in new project](https://forum.inductiveautomation.com/t/security-levels-and-zone-in-new-project/96454)

<div class="topic-metadata">

**Author:** [@Aiasa21](https://forum.inductiveautomation.com/u/Aiasa21)\
**Replies:** 0\
**Last updated:** [September 25, 2024, 7:08pm UTC](https://forum.inductiveautomation.com/t/security-levels-and-zone-in-new-project/96454 "2024-09-25T19:08:04Z")

</div>

Good morning, I would kindly like some clarification regarding security levels and security zone to understand the feasibility of what I would like to implement. After reading and watching the videos, I still don’t have…

---

## [Where to find the .modl file for the IIoT Module](https://forum.inductiveautomation.com/t/where-to-find-the-modl-file-for-the-iiot-module/96443)

<div class="topic-metadata">

**Author:** [@face\_plant](https://forum.inductiveautomation.com/u/face_plant)\
**Replies:** 8\
**Last updated:** [September 25, 2024, 6:59pm UTC](https://forum.inductiveautomation.com/t/where-to-find-the-modl-file-for-the-iiot-module/96443 "2024-09-25T18:59:21Z")

</div>

Hello! I have an ignition edge instance that I would like to install the IIoT Module on. If I go into the Config tab and look at the Overview section, it says that the Ignition Edge IIoT module is available I then pr…

---

## [Vison Tab Strip does not navigate to the previously opened window](https://forum.inductiveautomation.com/t/vison-tab-strip-does-not-navigate-to-the-previously-opened-window/96447)

<div class="topic-metadata">

**Author:** [@cbanzet](https://forum.inductiveautomation.com/u/cbanzet)\
**Replies:** 7\
**Last updated:** [September 25, 2024, 6:22pm UTC](https://forum.inductiveautomation.com/t/vison-tab-strip-does-not-navigate-to-the-previously-opened-window/96447 "2024-09-25T18:22:08Z")

</div>

I am now on v8.1.43 having recently upgraded from v8.1.24. This was one of the issues I had hoped the upgrade would fix, but it didn't. My tab strip is set up in the traditional "Navigation North" way. It's on a docke…

---

## [Converting the values of a dataset to a JSON string in WebDev](https://forum.inductiveautomation.com/t/converting-the-values-of-a-dataset-to-a-json-string-in-webdev/96448)

<div class="topic-metadata">

**Author:** [@Noah\_Steele](https://forum.inductiveautomation.com/u/Noah_Steele)\
**Replies:** 1\
**Last updated:** [September 25, 2024, 6:08pm UTC](https://forum.inductiveautomation.com/t/converting-the-values-of-a-dataset-to-a-json-string-in-webdev/96448 "2024-09-25T18:08:26Z")

</div>

Hi there! I have a query tag that is querying a DB table and putting the values into a dataset, and I need to be able to convert this dataset to a JSON string so that I can make it accessible through WebDev via http doGe…

---

## [Failover Backup Gateway SSL Certificates](https://forum.inductiveautomation.com/t/failover-backup-gateway-ssl-certificates/96250)

<div class="topic-metadata">

**Author:** [@M.O](https://forum.inductiveautomation.com/u/M.O)\
**Replies:** 5\
**Last updated:** [September 25, 2024, 6:07pm UTC](https://forum.inductiveautomation.com/t/failover-backup-gateway-ssl-certificates/96250 "2024-09-25T18:07:12Z")

</div>

Ignition 8.1, issue is with mobile application but we have not been able to test this scenario with just a browser yet. We have installed SSL certificates on our Master gateway and Backup gateway. When connecting from t…

---

## [MariaDB NewConnection](https://forum.inductiveautomation.com/t/mariadb-newconnection/96446)

<div class="topic-metadata">

**Author:** [@Ha99](https://forum.inductiveautomation.com/u/Ha99)\
**Replies:** 3\
**Last updated:** [September 25, 2024, 5:41pm UTC](https://forum.inductiveautomation.com/t/mariadb-newconnection/96446 "2024-09-25T17:41:13Z")

</div>

Hi, I just installed the latest version of MariaDB 11.4.3 and I followed the procedure to update the jdbc driver JDBC Drivers and Translators | Ignition User Manual, except that I got an error, my connection is faulted: …

---

## [Is it possible to allow a user to select which table columns are shown?](https://forum.inductiveautomation.com/t/is-it-possible-to-allow-a-user-to-select-which-table-columns-are-shown/96325)

<div class="topic-metadata">

**Author:** [@mdemaris](https://forum.inductiveautomation.com/u/mdemaris)\
**Replies:** 15\
**Last updated:** [September 25, 2024, 5:32pm UTC](https://forum.inductiveautomation.com/t/is-it-possible-to-allow-a-user-to-select-which-table-columns-are-shown/96325 "2024-09-25T17:32:55Z")

</div>

This is a standard Vision table. I would like to allow users to select what columns they would like to see. By default I would like to have a handful, but if they need more information, they could select a few more. I…

---

## [Duplicate Tag](https://forum.inductiveautomation.com/t/duplicate-tag/3582)

<div class="topic-metadata">

**Author:** [@jay](https://forum.inductiveautomation.com/u/jay)\
**Replies:** 2\
**Last updated:** [September 25, 2024, 5:05pm UTC](https://forum.inductiveautomation.com/t/duplicate-tag/3582 "2024-09-25T17:05:29Z")

</div>

I would like a context menu option when right-clicking a tag in the SQLTags browser that duplicates a tag. This would make a copy of the selected tag AND automatically open the edit window. The tag would not be saved…

---

## [Random Lines on vision chart](https://forum.inductiveautomation.com/t/random-lines-on-vision-chart/96438)

<div class="topic-metadata">

**Author:** [@Brennan\_Joles](https://forum.inductiveautomation.com/u/Brennan_Joles)\
**Replies:** 4\
**Last updated:** [September 25, 2024, 5:05pm UTC](https://forum.inductiveautomation.com/t/random-lines-on-vision-chart/96438 "2024-09-25T17:05:17Z")

</div>

I am having an issue with some of my vision charts having random lines across the data. The data itself is correct but not being displayed properly. I have 12 charts on a screen, and they all have the same formatting on …

---

## [SQL Tag not an option](https://forum.inductiveautomation.com/t/sql-tag-not-an-option/96442)

<div class="topic-metadata">

**Author:** [@Elmer\_Sanchez](https://forum.inductiveautomation.com/u/Elmer_Sanchez)\
**Replies:** 2\
**Last updated:** [September 25, 2024, 5:01pm UTC](https://forum.inductiveautomation.com/t/sql-tag-not-an-option/96442 "2024-09-25T17:01:58Z")

</div>

Hello, I am trying to pull tags/data from a database but "SQL Tag" isn't an option in the tag browser. Is this an add-on that I have to purchase? The module is installed and I'm connected to the database. It actually s…

---

## [User roles mapping for an AD / Database user source](https://forum.inductiveautomation.com/t/user-roles-mapping-for-an-ad-database-user-source/96430)

<div class="topic-metadata">

**Author:** [@YF129701](https://forum.inductiveautomation.com/u/YF129701)\
**Replies:** 5\
**Last updated:** [September 25, 2024, 4:36pm UTC](https://forum.inductiveautomation.com/t/user-roles-mapping-for-an-ad-database-user-source/96430 "2024-09-25T16:36:48Z")

</div>

I'm trying to understand what the process is for saving user roles against an AD user. I have a fully fledged database model built out and tested for a Database user source that we've been using. Its very similar to what…

---

## [Remoting into pcs for TVs for Ignition](https://forum.inductiveautomation.com/t/remoting-into-pcs-for-tvs-for-ignition/96434)

<div class="topic-metadata">

**Author:** [@Zach\_Larson](https://forum.inductiveautomation.com/u/Zach_Larson)\
**Replies:** 2\
**Last updated:** [September 25, 2024, 4:31pm UTC](https://forum.inductiveautomation.com/t/remoting-into-pcs-for-tvs-for-ignition/96434 "2024-09-25T16:31:13Z")

</div>

Is there a nice software to manage the pcs we remote to for our pages we display on TVs across sites, or is regular remote desktop the best way still? Also, I saw Intel compute sticks from 9 years ago just now for like …

---

## [Perspective PowerChart doesn't show dots but line (display type scatter)](https://forum.inductiveautomation.com/t/perspective-powerchart-doesnt-show-dots-but-line-display-type-scatter/95625)

<div class="topic-metadata">

**Author:** [@tecnoeletronic](https://forum.inductiveautomation.com/u/tecnoeletronic)\
**Replies:** 6\
**Last updated:** [September 25, 2024, 4:29pm UTC](https://forum.inductiveautomation.com/t/perspective-powerchart-doesnt-show-dots-but-line-display-type-scatter/95625 "2024-09-25T16:29:39Z")

</div>

Hi, In a Perspective PowerChart how can I show only points (dots) without interpolation between them? I tried all the settings in Pen-Display, but I couldn't find a way to achieve this.

---

## [Gateway connection dropping out](https://forum.inductiveautomation.com/t/gateway-connection-dropping-out/96432)

<div class="topic-metadata">

**Author:** [@Adam\_Lyon](https://forum.inductiveautomation.com/u/Adam_Lyon)\
**Replies:** 12\
**Last updated:** [September 25, 2024, 4:13pm UTC](https://forum.inductiveautomation.com/t/gateway-connection-dropping-out/96432 "2024-09-25T16:13:25Z")

</div>

Our connection to the gateway keeps temporarily dropping out. In the designer, at the lower right corner, notifications that the gateway connection is lost, then restored are popping up about once a minute, sometimes mo…

---

## [Order views load and eliminating shadow embeds](https://forum.inductiveautomation.com/t/order-views-load-and-eliminating-shadow-embeds/96433)

<div class="topic-metadata">

**Author:** [@Zach\_Larson](https://forum.inductiveautomation.com/u/Zach_Larson)\
**Replies:** 1\
**Last updated:** [September 25, 2024, 4:12pm UTC](https://forum.inductiveautomation.com/t/order-views-load-and-eliminating-shadow-embeds/96433 "2024-09-25T16:12:04Z")

</div>

When using embeds, how do you eliminate components from being drawn before they are switched to the intended view appearance the best? I have some pages with embeds. They have expressions to determine which widgets wil…

---

## [Project Backup Compare Tool?](https://forum.inductiveautomation.com/t/project-backup-compare-tool/96431)

<div class="topic-metadata">

**Author:** [@Tracy\_Toth](https://forum.inductiveautomation.com/u/Tracy_Toth)\
**Replies:** 1\
**Last updated:** [September 25, 2024, 3:35pm UTC](https://forum.inductiveautomation.com/t/project-backup-compare-tool/96431 "2024-09-25T15:35:43Z")

</div>

I have a project file that will be used by multiple people to make changes. Each person will make their change, create a backup, and put the back up in our shared folder system. Some of the changes may be just to tags,…

---

## [PackedHistoricalTagValue uses Deprecated TagPath](https://forum.inductiveautomation.com/t/packedhistoricaltagvalue-uses-deprecated-tagpath/96364)

<div class="topic-metadata">

**Author:** [@Cole\_Townsend](https://forum.inductiveautomation.com/u/Cole_Townsend)\
**Replies:** 4\
**Last updated:** [September 25, 2024, 3:08pm UTC](https://forum.inductiveautomation.com/t/packedhistoricaltagvalue-uses-deprecated-tagpath/96364 "2024-09-25T15:08:16Z")

</div>

The docs for PackedHistoricalTagValue show a constructor that uses a TagPath Object. I'm trying to store data in the tag historian tables using 'virtual' tags to use the pre-existing Power Chart component to display dat…

---

## [Questions about Inline frame](https://forum.inductiveautomation.com/t/questions-about-inline-frame/96347)

<div class="topic-metadata">

**Author:** [@Senthee\_Wu](https://forum.inductiveautomation.com/u/Senthee_Wu)\
**Replies:** 8\
**Last updated:** [September 25, 2024, 3:00pm UTC](https://forum.inductiveautomation.com/t/questions-about-inline-frame/96347 "2024-09-25T15:00:44Z")

</div>

Hi everyone, I'm having problems with Inline Frame, I've looked through the forums and haven't found anyone sharing a similar problem to mine. I put a frontend interface A on Inline Frame, after saving the project and o…

---

## [Allen-Bradley Logix Driver Read single Bit](https://forum.inductiveautomation.com/t/allen-bradley-logix-driver-read-single-bit/96419)

<div class="topic-metadata">

**Author:** [@andrea.parola](https://forum.inductiveautomation.com/u/andrea.parola)\
**Replies:** 2\
**Last updated:** [September 25, 2024, 2:31pm UTC](https://forum.inductiveautomation.com/t/allen-bradley-logix-driver-read-single-bit/96419 "2024-09-25T14:31:48Z")

</div>

Hello, I have an Allen-Bradley Logix Driver and I was wondering how to read a single bit of a dword, but I haven't found a way to do it so far. my tag at the moment looks like the following one, but what I need to read…

---

## [Converting table row data into a graph](https://forum.inductiveautomation.com/t/converting-table-row-data-into-a-graph/96412)

<div class="topic-metadata">

**Author:** [@Alejandro\_Alaco](https://forum.inductiveautomation.com/u/Alejandro_Alaco)\
**Replies:** 5\
**Last updated:** [September 25, 2024, 2:12pm UTC](https://forum.inductiveautomation.com/t/converting-table-row-data-into-a-graph/96412 "2024-09-25T14:12:26Z")

</div>

Hello! I would like to show a graph in a Power Chart when I click on a row from a table. Something like: what I got now is a onRowClick event like: def runAction(self, event): if self.props.data is None or s…

---

## [Gateway Timer Scripts Not Running After DB Disconnect](https://forum.inductiveautomation.com/t/gateway-timer-scripts-not-running-after-db-disconnect/96400)

<div class="topic-metadata">

**Author:** [@jwieringa70](https://forum.inductiveautomation.com/u/jwieringa70)\
**Replies:** 3\
**Last updated:** [September 25, 2024, 2:10pm UTC](https://forum.inductiveautomation.com/t/gateway-timer-scripts-not-running-after-db-disconnect/96400 "2024-09-25T14:10:34Z")

</div>

Problem: When a gateway timer script is running in the project and connectivity with the SQL Server is lost, the running script(s) “hang up” and will not restart or run again at the configured time. The time “Last Exec…

---

## [Numeric entry field and zooming in](https://forum.inductiveautomation.com/t/numeric-entry-field-and-zooming-in/96123)

<div class="topic-metadata">

**Author:** [@drewdin](https://forum.inductiveautomation.com/u/drewdin)\
**Replies:** 5\
**Last updated:** [September 25, 2024, 2:10pm UTC](https://forum.inductiveautomation.com/t/numeric-entry-field-and-zooming-in/96123 "2024-09-25T14:10:24Z")

</div>

I created a small application for an iphone, it has a few numeric entry fields for data entry. When you click on the numeric entry field, the app kind of zooms in a bit on the entry you clicked, after you put the number…

---

## [Omron OPC UA Server rejects Ignition Client Certificate](https://forum.inductiveautomation.com/t/omron-opc-ua-server-rejects-ignition-client-certificate/96415)

<div class="topic-metadata">

**Author:** [@Eskil\_Holum](https://forum.inductiveautomation.com/u/Eskil_Holum)\
**Replies:** 8\
**Last updated:** [September 25, 2024, 1:22pm UTC](https://forum.inductiveautomation.com/t/omron-opc-ua-server-rejects-ignition-client-certificate/96415 "2024-09-25T13:22:57Z")

</div>

Hi, we are having trouble with connecting to an Omron OPC server from Igntion. We have tested the connection with UA Expert, and know that it is working, but when we try to connect with igntion OPC client we get this e…

---

## [Accessing Tag EngUnit in Alarm Display Path Expression](https://forum.inductiveautomation.com/t/accessing-tag-engunit-in-alarm-display-path-expression/96405)

<div class="topic-metadata">

**Author:** [@nader.chinichian](https://forum.inductiveautomation.com/u/nader.chinichian)\
**Replies:** 2\
**Last updated:** [September 25, 2024, 12:08pm UTC](https://forum.inductiveautomation.com/t/accessing-tag-engunit-in-alarm-display-path-expression/96405 "2024-09-25T12:08:44Z")

</div>

I try following the expression in the Alarm Display Path to get the tag Eng Unit metadata but the tag() function returns nothing: {PathToParentFolder} + " Critical Range " + {value} + " " + tag({PathToTag} + ".EngUnit…

---

## [How to Create a Sequence of Events view in Perspective](https://forum.inductiveautomation.com/t/how-to-create-a-sequence-of-events-view-in-perspective/96293)

<div class="topic-metadata">

**Author:** [@Aaron\_Stinson](https://forum.inductiveautomation.com/u/Aaron_Stinson)\
**Replies:** 16\
**Last updated:** [September 25, 2024, 9:12am UTC](https://forum.inductiveautomation.com/t/how-to-create-a-sequence-of-events-view-in-perspective/96293 "2024-09-25T09:12:49Z")

</div>

Is it possible to make a view that will display the most recently updated tags in order of when they were updated?

---

## [How to determine if you have write permissions on a tag?](https://forum.inductiveautomation.com/t/how-to-determine-if-you-have-write-permissions-on-a-tag/52855)

<div class="topic-metadata">

**Author:** [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Replies:** 3\
**Last updated:** [September 25, 2024, 2:51am UTC](https://forum.inductiveautomation.com/t/how-to-determine-if-you-have-write-permissions-on-a-tag/52855 "2024-09-25T02:51:49Z")

</div>

Disclaimer: I haven’t looked into this at all… a colleague just asked. How can you determine if the current user has write access to a tag that has security permission defined on it? He wants to display to the user tha…

---

## [How SVG Single Line Diagram](https://forum.inductiveautomation.com/t/how-svg-single-line-diagram/94168)

<div class="topic-metadata">

**Author:** [@Eugene49](https://forum.inductiveautomation.com/u/Eugene49)\
**Replies:** 26\
**Last updated:** [September 25, 2024, 1:11am UTC](https://forum.inductiveautomation.com/t/how-svg-single-line-diagram/94168 "2024-09-25T01:11:51Z")

</div>

Given the diagram below: With Pipes, Pumps, Valves, Vessels. - each of this should be clickable and can change state. What is the strategy? In SVG Editor, should I create Same size tile for each devices, and stitch…

---

## [Missing data in transaction group](https://forum.inductiveautomation.com/t/missing-data-in-transaction-group/17889)

<div class="topic-metadata">

**Author:** [@atay](https://forum.inductiveautomation.com/u/atay)\
**Replies:** 8\
**Last updated:** [September 24, 2024, 11:48pm UTC](https://forum.inductiveautomation.com/t/missing-data-in-transaction-group/17889 "2024-09-24T23:48:16Z")

</div>

Hello all, BLUF: Transaction groups sporadically fails to update a couple cell values, despite “Always store NULL for bad quality items” being unchecked. I am trying to catch 4 events regarding an operation cycle and…

[Previous page](https://forum.inductiveautomation.com/latest.md?page=385)

[Next page](https://forum.inductiveautomation.com/latest.md?page=387)
