# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=47

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 48

---

## [Ignition installation via script](https://forum.inductiveautomation.com/t/ignition-installation-via-script/115701)

<div class="topic-metadata">

**Author:** [@lovro.sibenik](https://forum.inductiveautomation.com/u/lovro.sibenik)\
**Replies:** 0\
**Last updated:** [May 26, 2026, 6:10am UTC](https://forum.inductiveautomation.com/t/ignition-installation-via-script/115701 "2026-05-26T06:10:35Z")

</div>

I need to prepare a setup script that will be transferred to an industrial PC (IPC) using a USB drive, together with all required files for an offline installation. The script must perform the following tasks: Instal…

---

## [Emergency Support Number](https://forum.inductiveautomation.com/t/emergency-support-number/115691)

<div class="topic-metadata">

**Author:** [@william.hull](https://forum.inductiveautomation.com/u/william.hull)\
**Replies:** 1\
**Last updated:** [May 25, 2026, 6:31pm UTC](https://forum.inductiveautomation.com/t/emergency-support-number/115691 "2026-05-25T18:31:57Z")

</div>

We had a major power failure last night and our ignition servers have been going off the wall since. I have contacted inductive automation via 1(800)266-7798, 1(888)730-9655, and 1(877)730-9655. We have the correct tier …

---

## [Expression for checking between two values](https://forum.inductiveautomation.com/t/expression-for-checking-between-two-values/115682)

<div class="topic-metadata">

**Author:** [@drewdin](https://forum.inductiveautomation.com/u/drewdin)\
**Replies:** 6\
**Last updated:** [May 25, 2026, 5:49pm UTC](https://forum.inductiveautomation.com/t/expression-for-checking-between-two-values/115682 "2026-05-25T17:49:57Z")

</div>

I am using an expression transform, to consolidate the simple math for a status tag. The expression below is always 0, even though the value is 50 and the ideal min is 60. I was assuming that since that's false, it woul…

---

## [Third Party Module Redundancy](https://forum.inductiveautomation.com/t/third-party-module-redundancy/115690)

<div class="topic-metadata">

**Author:** [@aaronrai24](https://forum.inductiveautomation.com/u/aaronrai24)\
**Replies:** 2\
**Last updated:** [May 25, 2026, 4:50pm UTC](https://forum.inductiveautomation.com/t/third-party-module-redundancy/115690 "2026-05-25T16:50:49Z")

</div>

I have a third party module that requires a tag provider and database connection to startup, so when setting up redundancy, I create these manually on the backup gateway and restart it. I then follow the steps of setting…

---

## [How to execute a script via time or/and via update?](https://forum.inductiveautomation.com/t/how-to-execute-a-script-via-time-or-and-via-update/115687)

<div class="topic-metadata">

**Author:** [@danielps1818](https://forum.inductiveautomation.com/u/danielps1818)\
**Replies:** 1\
**Last updated:** [May 25, 2026, 2:55pm UTC](https://forum.inductiveautomation.com/t/how-to-execute-a-script-via-time-or-and-via-update/115687 "2026-05-25T14:55:32Z")

</div>

Hi! I have a tag that changes. I don't know when it's going to change. It's dependedant on a machine. I have an script that executes whenever the tag changes. However, because the tag could be more than 30 seconds with…

---

## [User Manual - Incorrect steps in creating SVG libraries](https://forum.inductiveautomation.com/t/user-manual-incorrect-steps-in-creating-svg-libraries/115688)

<div class="topic-metadata">

**Author:** [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Replies:** 0\
**Last updated:** [May 25, 2026, 2:35pm UTC](https://forum.inductiveautomation.com/t/user-manual-incorrect-steps-in-creating-svg-libraries/115688 "2026-05-25T14:35:20Z")

</div>

Step 2 is incorrect: Save the file in the Ignition directory: C:\\Program Files\\Inductive Automation\\Ignition\\data\\config\\resources\\core\\com.inductiveautomation.perspective\\icons This directory is incorrect. You m…

---

## [How to Quickly Batch-Modify Ignition Tags' Addresses and Associated Displays via OPC](https://forum.inductiveautomation.com/t/how-to-quickly-batch-modify-ignition-tags-addresses-and-associated-displays-via-opc/115461)

<div class="topic-metadata">

**Author:** [@251240187](https://forum.inductiveautomation.com/u/251240187)\
**Replies:** 13\
**Last updated:** [May 25, 2026, 2:48am UTC](https://forum.inductiveautomation.com/t/how-to-quickly-batch-modify-ignition-tags-addresses-and-associated-displays-via-opc/115461 "2026-05-25T02:48:49Z")

</div>

After modifying the variable names in a Siemens DB block, how do you quickly batch-modify the corresponding tag addresses and linked screens in Ignition when using an OPC connection?

---

## [Charts: is there a way to rotate the axis name?](https://forum.inductiveautomation.com/t/charts-is-there-a-way-to-rotate-the-axis-name/115679)

<div class="topic-metadata">

**Author:** [@ajangula](https://forum.inductiveautomation.com/u/ajangula)\
**Replies:** 1\
**Last updated:** [May 24, 2026, 9:04pm UTC](https://forum.inductiveautomation.com/t/charts-is-there-a-way-to-rotate-the-axis-name/115679 "2026-05-24T21:04:44Z")

</div>

Hi, In charts, is there a way to rotate the axis name?

---

## [Access UDT root custom property inside a Tag Expression](https://forum.inductiveautomation.com/t/access-udt-root-custom-property-inside-a-tag-expression/115361)

<div class="topic-metadata">

**Author:** [@nader.chinichian](https://forum.inductiveautomation.com/u/nader.chinichian)\
**Replies:** 20\
**Last updated:** [May 24, 2026, 3:45pm UTC](https://forum.inductiveautomation.com/t/access-udt-root-custom-property-inside-a-tag-expression/115361 "2026-05-24T15:45:17Z")

</div>

Hi I have a UDT that has custom property at root level and inside UDT I have some tags inside a folder. I want those tags access root custom property in expression. What is the correct syntax? In following code the fi…

---

## [Ignition 8.1.16, Multi-Monitor Layout Causes Pop-Up Calendar Position Issues](https://forum.inductiveautomation.com/t/ignition-8-1-16-multi-monitor-layout-causes-pop-up-calendar-position-issues/115680)

<div class="topic-metadata">

**Author:** [@brandon7716](https://forum.inductiveautomation.com/u/brandon7716)\
**Replies:** 1\
**Last updated:** [May 24, 2026, 3:21pm UTC](https://forum.inductiveautomation.com/t/ignition-8-1-16-multi-monitor-layout-causes-pop-up-calendar-position-issues/115680 "2026-05-24T15:21:00Z")

</div>

When using the pop-up calendar component in the multi-monitor setup described below, the calendar behaves inconsistently depending on which monitor the client is running on. On Monitor 1, the pop-up calendar displays …

---

## [Updated from 8.1.42 to 8.1.53, now getting the can't deserialize view](https://forum.inductiveautomation.com/t/updated-from-8-1-42-to-8-1-53-now-getting-the-cant-deserialize-view/115676)

<div class="topic-metadata">

**Author:** [@Zach\_Larson](https://forum.inductiveautomation.com/u/Zach_Larson)\
**Replies:** 4\
**Last updated:** [May 24, 2026, 2:56am UTC](https://forum.inductiveautomation.com/t/updated-from-8-1-42-to-8-1-53-now-getting-the-cant-deserialize-view/115676 "2026-05-24T02:56:58Z")

</div>

I need to open these views. And I am unable to do so. "NavigationException: Failed to load resource: ABORTED Ignition v8.1.53 (b2026032414) Java: Azul Systems, Inc. 17.0.18 "

---

## [Gatway tag change script, getting id from db best practice](https://forum.inductiveautomation.com/t/gatway-tag-change-script-getting-id-from-db-best-practice/115677)

<div class="topic-metadata">

**Author:** [@drewdin](https://forum.inductiveautomation.com/u/drewdin)\
**Replies:** 5\
**Last updated:** [May 23, 2026, 7:55pm UTC](https://forum.inductiveautomation.com/t/gatway-tag-change-script-getting-id-from-db-best-practice/115677 "2026-05-23T19:55:57Z")

</div>

I have a bunch of variable names in a database by id, then I read the database and create the tags in a folder. no udt, its just singular values, they only change once a week so not high frequency of change. I have a ta…

---

## [How to reference UDT Properties like Parameters in Gateway Event Tag Change Scripts](https://forum.inductiveautomation.com/t/how-to-reference-udt-properties-like-parameters-in-gateway-event-tag-change-scripts/89004)

<div class="topic-metadata">

**Author:** [@framebuilder](https://forum.inductiveautomation.com/u/framebuilder)\
**Replies:** 2\
**Last updated:** [April 18, 2024, 2:14pm UTC](https://forum.inductiveautomation.com/t/how-to-reference-udt-properties-like-parameters-in-gateway-event-tag-change-scripts/89004 "2024-04-18T14:14:36Z")

</div>

We know how to reference UDT Properties like parameters in Tag Event Scripts like this: paramValue = tag\['parameters'\]\['myParam'\] But is there a way to reference them in Gateway Event Tag Change Scripts? I've seen peo…

---

## [Buffering Data in a PLC --\> Ignition --\> SQL](https://forum.inductiveautomation.com/t/buffering-data-in-a-plc-ignition-sql/115678)

<div class="topic-metadata">

**Author:** [@Seth\_Kahle](https://forum.inductiveautomation.com/u/Seth_Kahle)\
**Replies:** 2\
**Last updated:** [May 23, 2026, 6:21pm UTC](https://forum.inductiveautomation.com/t/buffering-data-in-a-plc-ignition-sql/115678 "2026-05-23T18:21:20Z")

</div>

Looking for approach advice on a use-case I have not handled before. I've got a remote PLC that has an pretty unstable network connection. This PLC collects serial data and aggregates it into a 1D-Array of UDT / Struc…

---

## [Ignition Pricing](https://forum.inductiveautomation.com/t/ignition-pricing/115660)

<div class="topic-metadata">

**Author:** [@geoffreydeschl35](https://forum.inductiveautomation.com/u/geoffreydeschl35)\
**Replies:** 6\
**Last updated:** [May 23, 2026, 3:52am UTC](https://forum.inductiveautomation.com/t/ignition-pricing/115660 "2026-05-23T03:52:42Z")

</div>

Hello Folks, I am a student from a University in Denmark and I'm currently working together with a production company. They want to improve their On-Time-Delivery performance and they had a digitalization plan in mind. …

---

## [Designer and Persective Workstation Apps not running on Linux](https://forum.inductiveautomation.com/t/designer-and-persective-workstation-apps-not-running-on-linux/83641)

<div class="topic-metadata">

**Author:** [@BlocIoT](https://forum.inductiveautomation.com/u/BlocIoT)\
**Replies:** 28\
**Last updated:** [May 23, 2026, 12:33am UTC](https://forum.inductiveautomation.com/t/designer-and-persective-workstation-apps-not-running-on-linux/83641 "2026-05-23T00:33:49Z")

</div>

Hello, I''m having issues in running the designer app on an Ubuntu 22.04.3 LTS x86\_64 machine. I noticed someone had the same issue on Mint back in 2019, but the workarounds didn't work for me. I tried both .desktop an…

---

## [(8.3) ProjectResourceListener Replacement](https://forum.inductiveautomation.com/t/8-3-projectresourcelistener-replacement/115673)

<div class="topic-metadata">

**Author:** [@bmusson](https://forum.inductiveautomation.com/u/bmusson)\
**Replies:** 2\
**Last updated:** [May 22, 2026, 9:01pm UTC](https://forum.inductiveautomation.com/t/8-3-projectresourcelistener-replacement/115673 "2026-05-22T21:01:50Z")

</div>

In 8.1, I'm using a ProjectResourceListener with a filter to listen for changes to my project resources. How should I handle this in 8.3? I see that I can register a ResourceCollectionListener with ProjectManager::addL…

---

## [\[IGN-4808\] Closing all open popups](https://forum.inductiveautomation.com/t/ign-4808-closing-all-open-popups/24291)

<div class="topic-metadata">

**Author:** [@nburt](https://forum.inductiveautomation.com/u/nburt)\
**Replies:** 14\
**Last updated:** [May 22, 2026, 8:12pm UTC](https://forum.inductiveautomation.com/t/ign-4808-closing-all-open-popups/24291 "2026-05-22T20:12:59Z")

</div>

My use case is, when a user opens a popup they are still able to resize the web browser which can cause Views to be reloaded if the container size grows or shrinks past its breakpoint. If this happens, I would like to cl…

---

## [Navigation Tab - Tier 2](https://forum.inductiveautomation.com/t/navigation-tab-tier-2/115672)

<div class="topic-metadata">

**Author:** [@patricia.leon](https://forum.inductiveautomation.com/u/patricia.leon)\
**Replies:** 1\
**Last updated:** [May 22, 2026, 7:49pm UTC](https://forum.inductiveautomation.com/t/navigation-tab-tier-2/115672 "2026-05-22T19:49:25Z")

</div>

Hi all, I have been trying to add a new tab to my Tier 2 Navigation Tab. I was able to add it to the top-level tabs, but when I try to configure the Tier 2 navigation, the subtabs that are supposed to appear when I clic…

---

## [How to prevent touch screen from trying to scroll inner containers or embedded views instead of parent container](https://forum.inductiveautomation.com/t/how-to-prevent-touch-screen-from-trying-to-scroll-inner-containers-or-embedded-views-instead-of-parent-container/115642)

<div class="topic-metadata">

**Author:** [@Nol](https://forum.inductiveautomation.com/u/Nol)\
**Replies:** 5\
**Last updated:** [May 22, 2026, 7:38pm UTC](https://forum.inductiveautomation.com/t/how-to-prevent-touch-screen-from-trying-to-scroll-inner-containers-or-embedded-views-instead-of-parent-container/115642 "2026-05-22T19:38:13Z")

</div>

I'm trying to troubleshoot a nuisance bug specific to touch screens / perspective mobile app. I have a layout where I have a tab container and views embedded within it. Each of those views is a coordinate container as t…

---

## [How to select an entire stacked column (all series) in a Perspective XY Chart?](https://forum.inductiveautomation.com/t/how-to-select-an-entire-stacked-column-all-series-in-a-perspective-xy-chart/115671)

<div class="topic-metadata">

**Author:** [@Farhan\_Basheer](https://forum.inductiveautomation.com/u/Farhan_Basheer)\
**Replies:** 0\
**Last updated:** [May 22, 2026, 7:00pm UTC](https://forum.inductiveautomation.com/t/how-to-select-an-entire-stacked-column-all-series-in-a-perspective-xy-chart/115671 "2026-05-22T19:00:09Z")

</div>

Hello all, I have a situation with a Perspective XY Chart where multiple series are stacked on top of each other to form a bar chart. The current behavior is that clicking on a bar only selects that individual series' …

---

## [Alarm Pipeline Switch Block Expressions](https://forum.inductiveautomation.com/t/alarm-pipeline-switch-block-expressions/115670)

<div class="topic-metadata">

**Author:** [@Frank-Nelson](https://forum.inductiveautomation.com/u/Frank-Nelson)\
**Replies:** 0\
**Last updated:** [May 22, 2026, 5:23pm UTC](https://forum.inductiveautomation.com/t/alarm-pipeline-switch-block-expressions/115670 "2026-05-22T17:23:32Z")

</div>

Hello, I am relatively new to Ignition and I have gone through the Induction University, I am currently working on the Ignition Design Challenge and I am at the Alarm Notification Pipeline section of the challenge. I am…

---

## [system.device.addDevice() - Advanced Modbus](https://forum.inductiveautomation.com/t/system-device-adddevice-advanced-modbus/115663)

<div class="topic-metadata">

**Author:** [@jespinmartin1](https://forum.inductiveautomation.com/u/jespinmartin1)\
**Replies:** 3\
**Last updated:** [May 22, 2026, 5:21pm UTC](https://forum.inductiveautomation.com/t/system-device-adddevice-advanced-modbus/115663 "2026-05-22T17:21:48Z")

</div>

We are trying to create a device using the module Advanced Modbus with system.device.addDevice. On every try I get ▶ Traceback The script I'm running is: system.device.addDevice(deviceType = "ModbusClient", deviceName =…

---

## [Perspective Workstation On-screen Keyboard/Keypad (OSK)](https://forum.inductiveautomation.com/t/perspective-workstation-on-screen-keyboard-keypad-osk/70702)

<div class="topic-metadata">

**Author:** [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Replies:** 28\
**Last updated:** [May 22, 2026, 5:05pm UTC](https://forum.inductiveautomation.com/t/perspective-workstation-on-screen-keyboard-keypad-osk/70702 "2026-05-22T17:05:21Z")

</div>

v8.1.25 OS: Windows 10 Touch panel: Advantech TPC1551WP-E3AE (note: I wouldn't recommend this HMI for anything other than to someone who likes to drink a lot of coffee, as an HMI with an Atom processor with ~400 CPU p…

---

## [Transitioning from Java Development to SCADA Engineering – Seeking Real-Time Industrial Experience](https://forum.inductiveautomation.com/t/transitioning-from-java-development-to-scada-engineering-seeking-real-time-industrial-experience/115666)

<div class="topic-metadata">

**Author:** [@saikirannani91534](https://forum.inductiveautomation.com/u/saikirannani91534)\
**Replies:** 1\
**Last updated:** [May 22, 2026, 5:00pm UTC](https://forum.inductiveautomation.com/t/transitioning-from-java-development-to-scada-engineering-seeking-real-time-industrial-experience/115666 "2026-05-22T17:00:50Z")

</div>

Hello Everyone, I come from an Electrical & Electronics Engineering background with a Master’s degree in Data Analytics. I am currently learning Ignition SCADA 8.1 through Inductive University, and I have completed arou…

---

## [Copy sql table data](https://forum.inductiveautomation.com/t/copy-sql-table-data/115589)

<div class="topic-metadata">

**Author:** [@ricardo.linares](https://forum.inductiveautomation.com/u/ricardo.linares)\
**Replies:** 11\
**Last updated:** [May 22, 2026, 5:00pm UTC](https://forum.inductiveautomation.com/t/copy-sql-table-data/115589 "2026-05-22T17:00:50Z")

</div>

Hello, new to this forum and to ignition but learning my way around. Need advice on or guidance to documentation to accomplish the following: I have a SQL table called recipenames and three other tables recipe1, recipe…

---

## [VIDEO starter kit for Ignition Vision and Perspective 8.1 / 8.3](https://forum.inductiveautomation.com/t/video-starter-kit-for-ignition-vision-and-perspective-8-1-8-3/66190)

<div class="topic-metadata">

**Author:** [@mazeyrat](https://forum.inductiveautomation.com/u/mazeyrat)\
**Replies:** 22\
**Last updated:** [May 22, 2026, 4:30pm UTC](https://forum.inductiveautomation.com/t/video-starter-kit-for-ignition-vision-and-perspective-8-1-8-3/66190 "2026-05-22T16:30:23Z")

</div>

:new: VIDEO starter kit for Ignition Vision and Perspective 8.1 :video\_camera: ! 3 use case: A standalone video wall Ignition Vision project A video wall Ignition Vision Project with the choices of the cameras driven by…

---

## [Issues syncing Tag History from Ignition Edge to Standard Gateway (History Sync)](https://forum.inductiveautomation.com/t/issues-syncing-tag-history-from-ignition-edge-to-standard-gateway-history-sync/115532)

<div class="topic-metadata">

**Author:** [@bsantaella](https://forum.inductiveautomation.com/u/bsantaella)\
**Replies:** 4\
**Last updated:** [May 22, 2026, 4:07pm UTC](https://forum.inductiveautomation.com/t/issues-syncing-tag-history-from-ignition-edge-to-standard-gateway-history-sync/115532 "2026-05-22T16:07:08Z")

</div>

Hi everyone, I'm having trouble synchronizing tag history from an Ignition Edge (v8.3.1) to a central Ignition Standard Gateway. Current Architecture: Edge Gateway: Has a local historian named edHistorian. Standa…

---

## [Perspective Session or Module ISSUE](https://forum.inductiveautomation.com/t/perspective-session-or-module-issue/115668)

<div class="topic-metadata">

**Author:** [@Jesus\_Paz\_Gonzalez](https://forum.inductiveautomation.com/u/Jesus_Paz_Gonzalez)\
**Replies:** 1\
**Last updated:** [May 22, 2026, 3:04pm UTC](https://forum.inductiveautomation.com/t/perspective-session-or-module-issue/115668 "2026-05-22T15:04:55Z")

</div>

Greetings to everyone. I have a problem with the Perspective Module within the Designer. I have tried practically everything recommended on this forum and really everything has been useless (the Perspective icon I need t…

---

## [Camera in Ignition](https://forum.inductiveautomation.com/t/camera-in-ignition/115659)

<div class="topic-metadata">

**Author:** [@jverbruggen](https://forum.inductiveautomation.com/u/jverbruggen)\
**Replies:** 2\
**Last updated:** [May 22, 2026, 1:04pm UTC](https://forum.inductiveautomation.com/t/camera-in-ignition/115659 "2026-05-22T13:04:31Z")

</div>

Hi, I'm working for Sabert in EU and we are planning to install Ignition also in our EU plants. For the moment only our US colleagues are working with ignition. So I am trying to have a camera on the plant in Ignition …

[Previous page](https://forum.inductiveautomation.com/latest.md?page=46)

[Next page](https://forum.inductiveautomation.com/latest.md?page=48)
