# Latest

**URL:** https://forum.inductiveautomation.com/latest.md?page=72

[Latest](https://forum.inductiveautomation.com/latest.md) · [Categories](https://forum.inductiveautomation.com/categories.md) · [Tags](https://forum.inductiveautomation.com/tags.md)

**Page:** 73

---

## [Pressco connection with OPC-UA](https://forum.inductiveautomation.com/t/pressco-connection-with-opc-ua/114647)

<div class="topic-metadata">

**Author:** [@amontelongo](https://forum.inductiveautomation.com/u/amontelongo)\
**Replies:** 1\
**Last updated:** [March 24, 2026, 6:53pm UTC](https://forum.inductiveautomation.com/t/pressco-connection-with-opc-ua/114647 "2026-03-24T18:53:52Z")

</div>

I would like to use Ignition 7.9.12 to connect to a Pressco Vision system using OPC-UA. When i make the connection and the status goes to connected, i can not browse the Pressco system for the tags that i am looking for…

---

## [MQTT Connection](https://forum.inductiveautomation.com/t/mqtt-connection/101014)

<div class="topic-metadata">

**Author:** [@Chintan\_Patel](https://forum.inductiveautomation.com/u/Chintan_Patel)\
**Replies:** 6\
**Last updated:** [March 24, 2026, 6:49pm UTC](https://forum.inductiveautomation.com/t/mqtt-connection/101014 "2026-03-24T18:49:05Z")

</div>

I would like to connect to an MQTT broker from Ignition using the MQTT Engine. I have the server certificate, and TLS is enabled. I am using port 8883. I also enabled TLS under the MQTT Distributor settings. I uploaded …

---

## [\[SAML\] 403 Error with Designer while gateway SSO works!](https://forum.inductiveautomation.com/t/saml-403-error-with-designer-while-gateway-sso-works/114646)

<div class="topic-metadata">

**Author:** [@TimeLordship](https://forum.inductiveautomation.com/u/TimeLordship)\
**Replies:** 0\
**Last updated:** [March 24, 2026, 4:42pm UTC](https://forum.inductiveautomation.com/t/saml-403-error-with-designer-while-gateway-sso-works/114646 "2026-03-24T16:42:50Z")

</div>

Hi, Following up to this specific post: SSO Login for Designer Session - #6 by TimeLordship I can login via gateway, but saml redirects incorrectly on Designer. Why is the behavior for Designer different than the gat…

---

## [TagHistoryQueryParams aggregation mode now required in Ignition 8.3.4?](https://forum.inductiveautomation.com/t/taghistoryqueryparams-aggregation-mode-now-required-in-ignition-8-3-4/114377)

<div class="topic-metadata">

**Author:** [@mpderbec](https://forum.inductiveautomation.com/u/mpderbec)\
**Replies:** 8\
**Last updated:** [March 24, 2026, 3:40pm UTC](https://forum.inductiveautomation.com/t/taghistoryqueryparams-aggregation-mode-now-required-in-ignition-8-3-4/114377 "2026-03-24T15:40:20Z")

</div>

Something changed between Ignition 8.3.0 and 8.3.4 such that the AggregationModes passed by TagHistoryQueryParams to TagHistoryManager.queryHistory() can no longer be null (an exception is thrown now). I don’t want any …

---

## [Historian Warning sqlth\_drv already exists](https://forum.inductiveautomation.com/t/historian-warning-sqlth-drv-already-exists/114414)

<div class="topic-metadata">

**Author:** [@y.parashchuk](https://forum.inductiveautomation.com/u/y.parashchuk)\
**Replies:** 10\
**Last updated:** [March 24, 2026, 3:23pm UTC](https://forum.inductiveautomation.com/t/historian-warning-sqlth-drv-already-exists/114414 "2026-03-24T15:23:02Z")

</div>

Hi all I having issue with Ignition and PostgreSQL DB as historian DB. Ignition generates waring each 1 minute that sqlth\_drv table is already exists - and indeed it exists, and has data inside which was added there by…

---

## [Perspective Symbols State Manipulation](https://forum.inductiveautomation.com/t/perspective-symbols-state-manipulation/114589)

<div class="topic-metadata">

**Author:** [@ethan.faraday](https://forum.inductiveautomation.com/u/ethan.faraday)\
**Replies:** 3\
**Last updated:** [March 24, 2026, 3:12pm UTC](https://forum.inductiveautomation.com/t/perspective-symbols-state-manipulation/114589 "2026-03-24T15:12:52Z")

</div>

Hi there, I’m developing a popup for a project in perspective, I’ve got separate popups for various valve and pump components. For the pump state, I went to Project Properties → Perspective → Symbols and added new stat…

---

## [Core Historian - Realtime glitch?](https://forum.inductiveautomation.com/t/core-historian-realtime-glitch/114632)

<div class="topic-metadata">

**Author:** [@tgarrison](https://forum.inductiveautomation.com/u/tgarrison)\
**Replies:** 3\
**Last updated:** [March 24, 2026, 12:30pm UTC](https://forum.inductiveautomation.com/t/core-historian-realtime-glitch/114632 "2026-03-24T12:30:13Z")

</div>

Anyone else seen this? Is it an issue with the Core Historian? Or with the XY Chart? Ignition 8.3.4 All 4 graphs are showing the same tag, realtime, 1hr. XY Chart's tag history config is set to "Prevent Interpolation" …

---

## [Property binding not working](https://forum.inductiveautomation.com/t/property-binding-not-working/114634)

<div class="topic-metadata">

**Author:** [@casian](https://forum.inductiveautomation.com/u/casian)\
**Replies:** 2\
**Last updated:** [March 24, 2026, 12:14pm UTC](https://forum.inductiveautomation.com/t/property-binding-not-working/114634 "2026-03-24T12:14:31Z")

</div>

hi, In Perspective, I’m trying to enable a button with 2 conditions and wrote an expression that works directly with the PLC tags: {\[PLC\]Valves/Valve1/Manual\_Mode.value} & {\[PLC\]Valves/Valve1/Manual\_Interlock.value} B…

---

## [Get View Coordinates to Open Pop-up](https://forum.inductiveautomation.com/t/get-view-coordinates-to-open-pop-up/114621)

<div class="topic-metadata">

**Author:** [@automator591](https://forum.inductiveautomation.com/u/automator591)\
**Replies:** 6\
**Last updated:** [March 24, 2026, 11:17am UTC](https://forum.inductiveautomation.com/t/get-view-coordinates-to-open-pop-up/114621 "2026-03-24T11:17:59Z")

</div>

I need to open pop-ups in a specific location when selecting a pushbutton. I need the x and y coordinates of the view I want to use as a location. How can I find those parameters? Also, if the user opens multiple pop-u…

---

## [Paste binding using script](https://forum.inductiveautomation.com/t/paste-binding-using-script/114610)

<div class="topic-metadata">

**Author:** [@Cose\_Peter1](https://forum.inductiveautomation.com/u/Cose_Peter1)\
**Replies:** 11\
**Last updated:** [March 24, 2026, 4:16am UTC](https://forum.inductiveautomation.com/t/paste-binding-using-script/114610 "2026-03-24T04:16:13Z")

</div>

Hi, I have few flex repeaters that have almost 44 instances on each of them. I created these instances and their related parameters by using a script and assigning them to the instance property of the flex repeater. Bu…

---

## [DateTime Input Component customization](https://forum.inductiveautomation.com/t/datetime-input-component-customization/114619)

<div class="topic-metadata">

**Author:** [@sayantachatterjee](https://forum.inductiveautomation.com/u/sayantachatterjee)\
**Replies:** 4\
**Last updated:** [March 24, 2026, 3:19am UTC](https://forum.inductiveautomation.com/t/datetime-input-component-customization/114619 "2026-03-24T03:19:09Z")

</div>

Can we customize the DATE TIME INPUT component to make Monday as the First Day in the calendar view & also is it possible to edit the Day/Month/Year without opening the calendar?

---

## [SSL certificate with Let's Encrypt for Windows Server](https://forum.inductiveautomation.com/t/ssl-certificate-with-lets-encrypt-for-windows-server/97019)

<div class="topic-metadata">

**Author:** [@Pyrak](https://forum.inductiveautomation.com/u/Pyrak)\
**Replies:** 10\
**Last updated:** [March 23, 2026, 11:14pm UTC](https://forum.inductiveautomation.com/t/ssl-certificate-with-lets-encrypt-for-windows-server/97019 "2026-03-23T23:14:34Z")

</div>

Hi everyone, For those who have been able to setup SSL/TLS with letsencrypt on their Ignition servers running in windows, how did you go about the process. I have been stuck on this for some time now.

---

## [Redundancy failover based on PLC communication loss and recovery](https://forum.inductiveautomation.com/t/redundancy-failover-based-on-plc-communication-loss-and-recovery/114629)

<div class="topic-metadata">

**Author:** [@a.moutska](https://forum.inductiveautomation.com/u/a.moutska)\
**Replies:** 3\
**Last updated:** [March 23, 2026, 9:11pm UTC](https://forum.inductiveautomation.com/t/redundancy-failover-based-on-plc-communication-loss-and-recovery/114629 "2026-03-23T21:11:49Z")

</div>

Hello everyone, I am using Ignition 8.3.4 with Perspective and a gateway redundancy architecture in Master/Backup mode. My setup is the following: \* Each gateway server has two network cards. \* One network card is de…

---

## [Are there any good chart modules that work with Edge?](https://forum.inductiveautomation.com/t/are-there-any-good-chart-modules-that-work-with-edge/114630)

<div class="topic-metadata">

**Author:** [@Brian\_Stilson](https://forum.inductiveautomation.com/u/Brian_Stilson)\
**Replies:** 1\
**Last updated:** [March 23, 2026, 8:55pm UTC](https://forum.inductiveautomation.com/t/are-there-any-good-chart-modules-that-work-with-edge/114630 "2026-03-23T20:55:08Z")

</div>

I’m talking something like Apex charts. Edge really doesn’t seem to like many third party modules, but I’m wondering if anybody knows of a good exception?

---

## [User Object addRoles vs setRoles](https://forum.inductiveautomation.com/t/user-object-addroles-vs-setroles/114625)

<div class="topic-metadata">

**Author:** [@Eugene49](https://forum.inductiveautomation.com/u/Eugene49)\
**Replies:** 9\
**Last updated:** [March 23, 2026, 8:38pm UTC](https://forum.inductiveautomation.com/t/user-object-addroles-vs-setroles/114625 "2026-03-23T20:38:36Z")

</div>

I encountered this code: roles=\['operator'\] userObject.setRoles(roles) But I already know this code: userObject.addRoles(roles) Similarly addContactInfo() vs setContactInfo() ? I am confuse. When do I use set vs ad…

---

## [Unable to find source of blank popup window](https://forum.inductiveautomation.com/t/unable-to-find-source-of-blank-popup-window/114623)

<div class="topic-metadata">

**Author:** [@Daniel\_Kareem\_Tabet](https://forum.inductiveautomation.com/u/Daniel_Kareem_Tabet)\
**Replies:** 1\
**Last updated:** [March 23, 2026, 8:35pm UTC](https://forum.inductiveautomation.com/t/unable-to-find-source-of-blank-popup-window/114623 "2026-03-23T20:35:47Z")

</div>

Hi Everyone, I am running into a bit of a tricky issue, where I have a button with a “Popup” event on it. When the button is pressed the popup appears as expected with no issues. However every 1 out of 10 times or so, …

---

## [PDF Viewer not rendering less than / greater than correct in Arial Font](https://forum.inductiveautomation.com/t/pdf-viewer-not-rendering-less-than-greater-than-correct-in-arial-font/112620)

<div class="topic-metadata">

**Author:** [@bkarabinchak.psi](https://forum.inductiveautomation.com/u/bkarabinchak.psi)\
**Replies:** 13\
**Last updated:** [March 23, 2026, 7:42pm UTC](https://forum.inductiveautomation.com/t/pdf-viewer-not-rendering-less-than-greater-than-correct-in-arial-font/112620 "2026-03-23T19:42:14Z")

</div>

Having an issue I believe is similar to this Font rendering issue with PDF viewer - #6 by flavien But my issue is that I am using the Arial font everywhere which I at least think is a normal font that sholud be render-a…

---

## [Creating a separate user table upon Idp Login](https://forum.inductiveautomation.com/t/creating-a-separate-user-table-upon-idp-login/114626)

<div class="topic-metadata">

**Author:** [@Eugene49](https://forum.inductiveautomation.com/u/Eugene49)\
**Replies:** 1\
**Last updated:** [March 23, 2026, 6:40pm UTC](https://forum.inductiveautomation.com/t/creating-a-separate-user-table-upon-idp-login/114626 "2026-03-23T18:40:44Z")

</div>

When we use active directory for "User Authentication" when logging in to our project. But we want ignition application to handle "Privileges", we want to have a "Separate User Table" in database. Instead of creating U…

---

## [Export project roles dataset](https://forum.inductiveautomation.com/t/export-project-roles-dataset/114624)

<div class="topic-metadata">

**Author:** [@rodney.oliveira1](https://forum.inductiveautomation.com/u/rodney.oliveira1)\
**Replies:** 3\
**Last updated:** [March 23, 2026, 6:35pm UTC](https://forum.inductiveautomation.com/t/export-project-roles-dataset/114624 "2026-03-23T18:35:13Z")

</div>

Is there any way to export a dataset with the all the projects and their client required roles, similar with the page “configure \> security \> user,roles”, instead of opening each project and checking in the properties on…

---

## [8.1 & 8.3 Compatible module](https://forum.inductiveautomation.com/t/8-1-8-3-compatible-module/114627)

<div class="topic-metadata">

**Author:** [@Spencer\_Lommel1](https://forum.inductiveautomation.com/u/Spencer_Lommel1)\
**Replies:** 1\
**Last updated:** [March 23, 2026, 6:25pm UTC](https://forum.inductiveautomation.com/t/8-1-8-3-compatible-module/114627 "2026-03-23T18:25:56Z")

</div>

I am working on an Ignition Module for 8.3 currently and have it almost completed and it’s working well. We are also looking into supporting 8.1 and were wondering if it’s possible to have a single .modl file that suppor…

---

## [Perspective UI not updating in browser when modifying Drawing elements via message handler](https://forum.inductiveautomation.com/t/perspective-ui-not-updating-in-browser-when-modifying-drawing-elements-via-message-handler/114614)

<div class="topic-metadata">

**Author:** [@jbscada](https://forum.inductiveautomation.com/u/jbscada)\
**Replies:** 1\
**Last updated:** [March 23, 2026, 4:52pm UTC](https://forum.inductiveautomation.com/t/perspective-ui-not-updating-in-browser-when-modifying-drawing-elements-via-message-handler/114614 "2026-03-23T16:52:16Z")

</div>

I I am a beginner of the ignition system. I wrote a simple demo where clicking the button changes the color of the graphic, and then the color is written to the tag.This way, it can work properly. Then I attempted to ru…

---

## [OPC-UA Server Loopback Connection Issue after Adding Additional Client](https://forum.inductiveautomation.com/t/opc-ua-server-loopback-connection-issue-after-adding-additional-client/114368)

<div class="topic-metadata">

**Author:** [@Felipe\_CRM](https://forum.inductiveautomation.com/u/Felipe_CRM)\
**Replies:** 9\
**Last updated:** [March 23, 2026, 3:48pm UTC](https://forum.inductiveautomation.com/t/opc-ua-server-loopback-connection-issue-after-adding-additional-client/114368 "2026-03-23T15:48:43Z")

</div>

We recently added another client to our Ignition OPC-UA server. We had some issues setting up the client which are already addressed in other posts but eventually they connected properly. A little while later we discove…

---

## [Reports combined Bar/Line chart](https://forum.inductiveautomation.com/t/reports-combined-bar-line-chart/114559)

<div class="topic-metadata">

**Author:** [@Ryan\_Deardorff](https://forum.inductiveautomation.com/u/Ryan_Deardorff)\
**Replies:** 1\
**Last updated:** [March 23, 2026, 3:48pm UTC](https://forum.inductiveautomation.com/t/reports-combined-bar-line-chart/114559 "2026-03-23T15:48:19Z")

</div>

I have a chart in Perspective that I’m trying to replicate in a PDF report: Problem is, the Bar Chart doesn’t allow for the trend lines, and the XY/Timeseries charts can combine bars and lines, but I can’t figure out…

---

## [Feature Suggestion ack multi alarm voice notification](https://forum.inductiveautomation.com/t/feature-suggestion-ack-multi-alarm-voice-notification/114588)

<div class="topic-metadata">

**Author:** [@daniel4](https://forum.inductiveautomation.com/u/daniel4)\
**Replies:** 6\
**Last updated:** [March 23, 2026, 2:07pm UTC](https://forum.inductiveautomation.com/t/feature-suggestion-ack-multi-alarm-voice-notification/114588 "2026-03-23T14:07:10Z")

</div>

Hey guys, I'm not sure if there is another place for feature suggestions. But I’m just going to throw this in here. Would be great if we could add a “acknowledge all” to the voice notification modual. It’s super inconve…

---

## [Reporting MySQL Query Help](https://forum.inductiveautomation.com/t/reporting-mysql-query-help/11181)

<div class="topic-metadata">

**Author:** [@cire3621](https://forum.inductiveautomation.com/u/cire3621)\
**Replies:** 5\
**Last updated:** [March 23, 2026, 1:23pm UTC](https://forum.inductiveautomation.com/t/reporting-mysql-query-help/11181 "2026-03-23T13:23:23Z")

</div>

I am having issues using the SQL Query in reporting data source...I was able to get Historic tags to use StartDate & EndDate Parameters by just binding the Component start and end to the StartDate and EndDate, but I cann…

---

## [Highlight required time portion inside time series chart](https://forum.inductiveautomation.com/t/highlight-required-time-portion-inside-time-series-chart/114543)

<div class="topic-metadata">

**Author:** [@surajpatil26796](https://forum.inductiveautomation.com/u/surajpatil26796)\
**Replies:** 3\
**Last updated:** [March 23, 2026, 12:22pm UTC](https://forum.inductiveautomation.com/t/highlight-required-time-portion-inside-time-series-chart/114543 "2026-03-23T12:22:27Z")

</div>

Hi Experts, I am using TimeSeriesChart to display the machine’s power consumption over the last 24 hours inside the ignition perspective view, as shown below: X-time, Y-Consumption For the day, there are predefined …

---

## [Form Component Perspective + Image](https://forum.inductiveautomation.com/t/form-component-perspective-image/114617)

<div class="topic-metadata">

**Author:** [@Gomez](https://forum.inductiveautomation.com/u/Gomez)\
**Replies:** 0\
**Last updated:** [March 23, 2026, 8:51am UTC](https://forum.inductiveautomation.com/t/form-component-perspective-image/114617 "2026-03-23T08:51:56Z")

</div>

Hi, do you think using the new Form Component could be used to realize a sort of SOP ( standard operating procedure ) and, if yes, do you have any idea on how display contextual or fixed image inside a form component? A…

---

## [Number formatting in 8.3.3 after numeral.js was changed for Intl.NumberFormat](https://forum.inductiveautomation.com/t/number-formatting-in-8-3-3-after-numeral-js-was-changed-for-intl-numberformat/114591)

<div class="topic-metadata">

**Author:** [@ondrej.holomek](https://forum.inductiveautomation.com/u/ondrej.holomek)\
**Replies:** 2\
**Last updated:** [March 23, 2026, 6:20am UTC](https://forum.inductiveautomation.com/t/number-formatting-in-8-3-3-after-numeral-js-was-changed-for-intl-numberformat/114591 "2026-03-23T06:20:35Z")

</div>

Project is in PERSPECTIVE. With locale set to cs-CZ the number format stays the same as for en. Instead of 1,563.215 should be 1 563,215. This formatting works on NumericEntryField, but do not work for table columns as…

---

## [Perspective Went Missing After Migrating Ignition From 8.1.26 to 8.1.52 then from 8.1.52 to 8.3.4 version (Latest)](https://forum.inductiveautomation.com/t/perspective-went-missing-after-migrating-ignition-from-8-1-26-to-8-1-52-then-from-8-1-52-to-8-3-4-version-latest/114611)

<div class="topic-metadata">

**Author:** [@john.hadikusumo](https://forum.inductiveautomation.com/u/john.hadikusumo)\
**Replies:** 2\
**Last updated:** [March 23, 2026, 12:36am UTC](https://forum.inductiveautomation.com/t/perspective-went-missing-after-migrating-ignition-from-8-1-26-to-8-1-52-then-from-8-1-52-to-8-3-4-version-latest/114611 "2026-03-23T00:36:49Z")

</div>

I found an issue when trying to upgrade my client ignition project from 8.1.26 to 8.1.52 then from 8.1.52 to 8.3.34. I could see perspective section when the project was deployed on Ignition 8.1.26 with designer versio…

---

## [Designer Historian Blank in PowerChart](https://forum.inductiveautomation.com/t/designer-historian-blank-in-powerchart/114583)

<div class="topic-metadata">

**Author:** [@raymondahilliard](https://forum.inductiveautomation.com/u/raymondahilliard)\
**Replies:** 2\
**Last updated:** [March 21, 2026, 1:02pm UTC](https://forum.inductiveautomation.com/t/designer-historian-blank-in-powerchart/114583 "2026-03-21T13:02:40Z")

</div>

Hey everyone, First time on forum, and relatively new to Ignition, though I have a good bit of Controls experience. I’ve created a UDT and am trying to display the values using a PowerChart. I’ve created the PowerChar…

[Previous page](https://forum.inductiveautomation.com/latest.md?page=71)

[Next page](https://forum.inductiveautomation.com/latest.md?page=73)
