# 2 State Toggle on popup not working

**URL:** <https://forum.inductiveautomation.com/t/2-state-toggle-on-popup-not-working/97591>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [October 22, 2024, 10:28am UTC](https://forum.inductiveautomation.com/t/2-state-toggle-on-popup-not-working/97591 "2024-10-22T10:28:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mark\_Rowell](https://avatars.discourse-cdn.com/v4/letter/m/22d042/32.png) [@Mark\_Rowell](https://forum.inductiveautomation.com/u/Mark_Rowell)\
**Post date:** [October 22, 2024, 10:28am UTC](https://forum.inductiveautomation.com/t/2-state-toggle-on-popup-not-working/97591/1 "2024-10-22T10:28:54Z")

</div>

Have a popup with a 2 state toggle button with boolean tags attached. The diagnostics are good and the data quality is 192. Doesn't toggle bit in the PLC. Have tried direct tag and indirect with same results. Any suggestions?

---

<div class="post-metadata">

**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\
**Post date:** [October 22, 2024, 10:54am UTC](https://forum.inductiveautomation.com/t/2-state-toggle-on-popup-not-working/97591/2 "2024-10-22T10:54:34Z")

</div>

You're going to have to give more information.

1. Is the PLC writing to the bit?
2. Can you toggle the bit in the tag browser?

---

<div class="post-metadata">

**Author:** ![Mark\_Rowell](https://avatars.discourse-cdn.com/v4/letter/m/22d042/32.png) [@Mark\_Rowell](https://forum.inductiveautomation.com/u/Mark_Rowell)\
**Post date:** [October 22, 2024, 11:00am UTC](https://forum.inductiveautomation.com/t/2-state-toggle-on-popup-not-working/97591/3 "2024-10-22T11:00:02Z")

</div>

Always something simple. Item path incorrect. Thanks for the fresh eyes.