# 32-bit Vision Client Ignition 8.0 **URL:** \ **Category:** Ignition\ **Created:** [September 22, 2020, 5:57pm UTC](https://forum.inductiveautomation.com/t/32-bit-vision-client-ignition-8-0/38946 "2020-09-22T17:57:49Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Tim](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/tim/32/3361_2.png) [@Tim](https://forum.inductiveautomation.com/u/Tim)\ **Post date:** [September 23, 2020, 12:49pm UTC](https://forum.inductiveautomation.com/t/32-bit-vision-client-ignition-8-0/38946/2 "2020-09-23T12:49:58Z")
32-bit platforms (except ARM) are not supported for Vision. But there is a serviceable workaround for now. The system requirements vary quite a bit depending on your project so it would be difficult to specify these (although stating a 64-bit system should be added). > [@Does Ignition 8 support 32-bit Vision clients?](http://forum.inductiveautomation.com/t/does-ignition-8-support-32-bit-vision-clients/24072): > > Under discontinued features in the [upgrade guide for Ignition 8](https://docs.inductiveautomation.com/display/DOC80/Ignition+8+Upgrade+Guide) it states: Support for 32-bit platforms other than ARM has been discontinued I looked around a bit, but didn’t find anything to clarify whether this applies to gateway only, or to clients as well. After reviewing the upgrade guide, we’d like to upgrade to Ignition 8 for some of the improvements, but unfortunately still have various 32-bit clients around–including one running Windows XP that can’t be upgraded for various reason (… [https://support.inductiveautomation.com/index.php?/Knowledgebase/Article/View/127/0/ignition-8-32-bit-vision-clients](https://support.inductiveautomation.com/index.php?/Knowledgebase/Article/View/127/0/ignition-8-32-bit-vision-clients) --- _[View the full topic](https://forum.inductiveautomation.com/t/32-bit-vision-client-ignition-8-0/38946)._