# 3rd party chart builder

**URL:** <https://forum.inductiveautomation.com/t/3rd-party-chart-builder/80880>\
**Category:** General Discussion\
**Created:** [October 23, 2023, 10:13pm UTC](https://forum.inductiveautomation.com/t/3rd-party-chart-builder/80880 "2023-10-23T22:13:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![hw79](https://avatars.discourse-cdn.com/v4/letter/h/838e76/32.png) [@hw79](https://forum.inductiveautomation.com/u/hw79)\
**Post date:** [October 23, 2023, 10:13pm UTC](https://forum.inductiveautomation.com/t/3rd-party-chart-builder/80880/1 "2023-10-23T22:13:21Z")

</div>

A bit of a reach here, but there was a post on here that I had gotten a link to a website where you could configure a chart to the way you wanted it to look through the gui and then copy the settings into Ignition. I'm pretty sure this wasn't Kyvis charts as I don't remember installing a module to do this.

If anyone has any idea what I'm talking about and can point me in the right direction, I'd appreciate it.

---

<div class="post-metadata">

**Author:** ![andrew.budaiev](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/andrew.budaiev/32/72921_2.png) [@andrew.budaiev](https://forum.inductiveautomation.com/u/andrew.budaiev)\
**Post date:** [October 24, 2023, 1:10am UTC](https://forum.inductiveautomation.com/t/3rd-party-chart-builder/80880/2 "2023-10-24T01:10:22Z")

</div>

It sounds exactly like Apex Charts

> [@KyvisLabs ApexChart Module](https://forum.inductiveautomation.com/t/kyvislabs-apexchart-module/55263/79):
>
> @kyvislabs This might be good to add into the OP. PSA: the simplest way to make a chart is to use the online Apex Chart editor: [https://editor.apexcharts.com/](https://editor.apexcharts.com/) Copy the code output of this into props.options in the Ignition component, and make sure you change the props.type to the right chart type Edit: is @kyvislabs still around?? maybe @pgriffith or someone from IA can add this link and brief description of how to use it into the OP? man_shrugging

---

<div class="post-metadata">

**Author:** ![hw79](https://avatars.discourse-cdn.com/v4/letter/h/838e76/32.png) [@hw79](https://forum.inductiveautomation.com/u/hw79)\
**Post date:** [October 24, 2023, 1:35pm UTC](https://forum.inductiveautomation.com/t/3rd-party-chart-builder/80880/3 "2023-10-24T13:35:56Z")

</div>

Quite possibly, but I was thinking there was something like this for the Ignition charts not a module. I could be wrong.

Thank you.