# 7.3 Simulation Drivers?

**URL:** <https://forum.inductiveautomation.com/t/7-3-simulation-drivers/3393>\
**Category:** Ignition\
**Created:** [October 6, 2011, 11:23am UTC](https://forum.inductiveautomation.com/t/7-3-simulation-drivers/3393 "2011-10-06T11:23:18Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![DennisWomack](https://avatars.discourse-cdn.com/v4/letter/d/51bf81/32.png) [@DennisWomack](https://forum.inductiveautomation.com/u/DennisWomack)\
**Post date:** [October 6, 2011, 11:23am UTC](https://forum.inductiveautomation.com/t/7-3-simulation-drivers/3393/1 "2011-10-06T11:23:18Z")

</div>

Did 7.3 drop the simulation drivers?

They didn’t install and I don’t see them on your download page.

They were useful.

Thanks,

Dennis

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 6, 2011, 2:14pm UTC](https://forum.inductiveautomation.com/t/7-3-simulation-drivers/3393/2 "2011-10-06T14:14:36Z")

</div>

Not intentionally… I’ll look into it.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 6, 2011, 3:19pm UTC](https://forum.inductiveautomation.com/t/7-3-simulation-drivers/3393/3 "2011-10-06T15:19:18Z")

</div>

They are there for me on a fresh 7.3 install, under the “Simulators” folder when adding a device.

As for being on the website, they are part of the Allen-Bradley Drivers module, like they have always been.

---

<div class="post-metadata">

**Author:** ![DennisWomack](https://avatars.discourse-cdn.com/v4/letter/d/51bf81/32.png) [@DennisWomack](https://forum.inductiveautomation.com/u/DennisWomack)\
**Post date:** [October 6, 2011, 3:53pm UTC](https://forum.inductiveautomation.com/t/7-3-simulation-drivers/3393/4 "2011-10-06T15:53:47Z")

</div>

That explains it.

I had deleted the AB driver module.

When I upgraded the demo, I only loaded existing modules. Hence, no simulation.

Thanks

Dennis