# 7.7 Crosstab Basics

**URL:** <https://forum.inductiveautomation.com/t/7-7-crosstab-basics/11588>\
**Category:** Ignition\
**Created:** [April 27, 2016, 12:30pm UTC](https://forum.inductiveautomation.com/t/7-7-crosstab-basics/11588 "2016-04-27T12:30:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![EricFrancoeur](https://avatars.discourse-cdn.com/v4/letter/e/dfb087/32.png) [@EricFrancoeur](https://forum.inductiveautomation.com/u/EricFrancoeur)\
**Post date:** [April 27, 2016, 12:30pm UTC](https://forum.inductiveautomation.com/t/7-7-crosstab-basics/11588/1 "2016-04-27T12:30:49Z")

</div>

I know, I know, I didn’t have time to upgrade to 7.8 yet…

Ok I have a dataset of Logs, Sorted by Diameter Size, Length and Volume in M3:  
[attachment=1]Dataset.jpg[/attachment]

And I want a Cross tab table showing the Volume association of Size and Length… But instead of showing the Volume it shows N/A  
[attachment=0]Crosstab.jpg[/attachment]

This should be simple right ???

---

<div class="post-metadata">

**Author:** ![Ddugas](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/ddugas/32/14144_2.png) [@Ddugas](https://forum.inductiveautomation.com/u/Ddugas)\
**Post date:** [April 27, 2016, 12:57pm UTC](https://forum.inductiveautomation.com/t/7-7-crosstab-basics/11588/2 "2016-04-27T12:57:07Z")

</div>

try to ask your plc tech 😉 hahah ![:thumb_left:](https://us1.discourse-cdn.com/inductiveautomation/original/1X/e26afb081ddde6df016df6ee49159cf56aaca688.gif ":thumb\_left:") des joke francoeur c toer lmeilleur