# 8.1 Workstation Performance **URL:** \ **Category:** Ignition Early Access\ **Created:** [September 28, 2020, 4:40pm UTC](https://forum.inductiveautomation.com/t/8-1-workstation-performance/39122 "2020-09-28T16:40:06Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![kyle.demerath](https://avatars.discourse-cdn.com/v4/letter/k/5e9695/32.png) [@kyle.demerath](https://forum.inductiveautomation.com/u/kyle.demerath)\ **Post date:** [February 8, 2021, 6:05pm UTC](https://forum.inductiveautomation.com/t/8-1-workstation-performance/39122/7 "2021-02-08T18:05:04Z")
Workstation appears to work the same now (maybe even slightly faster, but don’t quote me on that) now that we’ve installed from 8.1.2. I did notice that when I first open a project, however, it is still slightly blurry. Borders on buttons seem a pixel or two wider as well in Workstation. I was wondering if the resolution on the computer was causing issues so I changed that to a larger resolution and voila, it was clear, just like in Chrome. Then I switched back to the resolution I had been using and it was still clear, so just being in that resolution didn’t seem to be an issue. If I start the application in either resolution the issue occurs where it is blurry. I did a little testing and it appears that the difference in appearance (blurry and the larger borders) occurs when the windows scaling is set to 125%. It may occur on other non 100% values as well, but this is the only one I tried due to the way our application is set up at the moment. I noticed a few other small nuance like position of text in tables, but they aren’t as big of a deal. The blurry-ness is the biggest issue visually. --- _[View the full topic](https://forum.inductiveautomation.com/t/8-1-workstation-performance/39122)._