# AB Logix Firmware 32 tag qualities Unknown

**URL:** <https://forum.inductiveautomation.com/t/ab-logix-firmware-32-tag-qualities-unknown/24870>\
**Category:** Ignition\
**Created:** [May 10, 2019, 5:36am UTC](https://forum.inductiveautomation.com/t/ab-logix-firmware-32-tag-qualities-unknown/24870 "2019-05-10T05:36:47Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![dustin.cooper](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dustin.cooper/32/29963_2.png) [@dustin.cooper](https://forum.inductiveautomation.com/u/dustin.cooper)\
**Post date:** [March 22, 2020, 6:31pm UTC](https://forum.inductiveautomation.com/t/ab-logix-firmware-32-tag-qualities-unknown/24870/4 "2020-03-22T18:31:40Z")

</div>

I’m running into the same issue with a 5581ES running 32.11 firmware.  
I’ve tried connecting to the PLC with servers running the following Ignition versions:  
• 7.9.9  
• 7.9.12  
• 8.0.9  
And I get the same symptoms as OP. I am connected, can browse, but have bad quality on any tag.

I am connected over an ENBT card in slot 2 of the rack, and then to slot 0.

Gateway restarts, and enable/disable of device connections have not helped.

For comparison, I am able to connect to an L71S and a compact logix (1769-L36ERMS) safety PLCs running v32 firmware with the same servers…

---

_[View the full topic](https://forum.inductiveautomation.com/t/ab-logix-firmware-32-tag-qualities-unknown/24870)._