# Action buttons inside table component

**URL:** <https://forum.inductiveautomation.com/t/action-buttons-inside-table-component/51714>\
**Category:** Ignition\
**Tags:** ignition80, perspective\
**Created:** [October 7, 2021, 5:58pm UTC](https://forum.inductiveautomation.com/t/action-buttons-inside-table-component/51714 "2021-10-07T17:58:02Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![swolnisty](https://avatars.discourse-cdn.com/v4/letter/s/7bcc69/32.png) [@swolnisty](https://forum.inductiveautomation.com/u/swolnisty)\
**Post date:** [October 7, 2021, 9:38pm UTC](https://forum.inductiveautomation.com/t/action-buttons-inside-table-component/51714/3 "2021-10-07T21:38:26Z")

</div>

The linked page in the manual from the post above is specifically for Vision’s Power Table component. I am going to assume OP is referring to Perspective’s Table component instead, based on the thread’s associated tags.

I think the answer to the question depends largely on what data is in the table and what the expected action of a button in a row would be. If the goal is to have those buttons manipulate the values in the table’s props.data property then [this thread](https://forum.inductiveautomation.com/t/perspective-table-dynamic-column-viewparams-per-row/34657) might help you get a few ideas. It specifically covers displaying information in a cell rendered as an embedded view as well as interacting with a dropdown component within the embedded view, but the principle could just as easily apply to an embedded view with a button as well.

---

_[View the full topic](https://forum.inductiveautomation.com/t/action-buttons-inside-table-component/51714)._