# Added Rows to Power Table-too small

**URL:** <https://forum.inductiveautomation.com/t/added-rows-to-power-table-too-small/43785>\
**Category:** Ignition\
**Created:** [February 24, 2021, 2:48pm UTC](https://forum.inductiveautomation.com/t/added-rows-to-power-table-too-small/43785 "2021-02-24T14:48:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![toddayers](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@toddayers](https://forum.inductiveautomation.com/u/toddayers)\
**Post date:** [February 24, 2021, 2:48pm UTC](https://forum.inductiveautomation.com/t/added-rows-to-power-table-too-small/43785/1 "2021-02-24T14:48:41Z")

</div>

I created a power table and added some rows so they could store the data I needed. But when I look at the table with the new rows, all the rows are compressed and I am trying to figure out how to make them bigger… here is a screenshot of what i am referring to

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/6/5688ee79b9241c995b7ed732a5815d08110bf21d.png)

---

<div class="post-metadata">

**Author:** ![code\_skin](https://avatars.discourse-cdn.com/v4/letter/c/43a26b/32.png) [@code\_skin](https://forum.inductiveautomation.com/u/code_skin)\
**Post date:** [February 24, 2021, 2:52pm UTC](https://forum.inductiveautomation.com/t/added-rows-to-power-table-too-small/43785/2 "2021-02-24T14:52:48Z")

</div>

Check the power table properties for Auto Row Height:  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/3/33f9aca01c8c83cd527fca9db5cdbbbce6717edf.png)

---

<div class="post-metadata">

**Author:** ![toddayers](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@toddayers](https://forum.inductiveautomation.com/u/toddayers)\
**Post date:** [February 24, 2021, 5:48pm UTC](https://forum.inductiveautomation.com/t/added-rows-to-power-table-too-small/43785/3 "2021-02-24T17:48:33Z")

</div>

Thank you!! Such an easy fix!!