# After upgrading Ignition on RPI Edition changed from Maker to Standard **URL:** \ **Category:** Maker\ **Created:** [November 3, 2025, 3:12am UTC](https://forum.inductiveautomation.com/t/after-upgrading-ignition-on-rpi-edition-changed-from-maker-to-standard/111884 "2025-11-03T03:12:26Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![andrew.budaiev](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/andrew.budaiev/32/72921_2.png) [@andrew.budaiev](https://forum.inductiveautomation.com/u/andrew.budaiev)\ **Post date:** [November 3, 2025, 3:32am UTC](https://forum.inductiveautomation.com/t/after-upgrading-ignition-on-rpi-edition-changed-from-maker-to-standard/111884/2 "2025-11-03T03:32:08Z")
You can check this. Maybe you'll have to just add `=maker`? That's my guess. > [@Migrate to Ignition Edge from Standard Edition](https://forum.inductiveautomation.com/t/migrate-to-ignition-edge-from-standard-edition/89754/2): > > You can override the Edition selection that is used on startup by setting -Dedition=edge in the data/ignition.conf file under the wrapper.java.additional.\* settings. More general guidance [here](https://docs.inductiveautomation.com/docs/8.1/appendix/reference-pages/gateway-configuration-file-reference#changing-java-additional-parameters). It would probably be a good idea to take a Gateway Backup prior to doing this, just in case. P.S. found maker-related source > [@Migrating an Ignition Gateway to Maker](https://forum.inductiveautomation.com/t/migrating-an-ignition-gateway-to-maker/35930): > > During the presentation, the ease of moving an existing Ignition Gateway to Maker Edition was simplified a bit too much for this initial release. We are working to make it that simple in 8.0.15, but the current steps to migrate are as follows: Make backup of your existing Ignition gateway and shut it down Create new install of Ignition specifying Maker Edition and go through the commissioning process. Some things you want to be aware of: We advise renaming the service when using the new inst… --- _[View the full topic](https://forum.inductiveautomation.com/t/after-upgrading-ignition-on-rpi-edition-changed-from-maker-to-standard/111884)._