# Airlink LS300 RV50X - HELP to SETUP

**URL:** <https://forum.inductiveautomation.com/t/airlink-ls300-rv50x-help-to-setup/84127>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [January 11, 2024, 4:52pm UTC](https://forum.inductiveautomation.com/t/airlink-ls300-rv50x-help-to-setup/84127 "2024-01-11T16:52:11Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![michael.flagler](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/michael.flagler/32/26272_2.png) [@michael.flagler](https://forum.inductiveautomation.com/u/michael.flagler)\
**Post date:** [January 11, 2024, 8:58pm UTC](https://forum.inductiveautomation.com/t/airlink-ls300-rv50x-help-to-setup/84127/7 "2024-01-11T20:58:16Z")

</div>

You should have kept your original thread going instead of starting a second thread on the exact same topic.

> [@AIRLINK LS300 RV50X network gateway](https://forum.inductiveautomation.com/t/airlink-ls300-rv50x-network-gateway/83861):
>
> Please someone can help me with this setup. I did follow the procedure in this link: I did the setup connecting the RV50x on my ethernet port in my PC, but when I connected to the router I couldn't access it anymore. The problem is how can I connect the RV50x to my network gateway to use in ignition. I didn't find a place to set my Gateway Ip Address. Thanks

As @pturmel mentioned, you're on different subnets, so these networks will need routed and the proper ACLs in place. You can't just change subnet masks to make things work. I don't know if you can get IT to allow you to put the modem on the same network as Ignition, but it would take the firewall out of the equation.

---

_[View the full topic](https://forum.inductiveautomation.com/t/airlink-ls300-rv50x-help-to-setup/84127)._