# Airlink Raven XE Config file

**URL:** <https://forum.inductiveautomation.com/t/airlink-raven-xe-config-file/6450>\
**Category:** Ignition\
**Created:** [May 13, 2013, 1:42am UTC](https://forum.inductiveautomation.com/t/airlink-raven-xe-config-file/6450 "2013-05-13T01:42:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![danielsoar](https://avatars.discourse-cdn.com/v4/letter/d/82dd89/32.png) [@danielsoar](https://forum.inductiveautomation.com/u/danielsoar)\
**Post date:** [May 13, 2013, 1:42am UTC](https://forum.inductiveautomation.com/t/airlink-raven-xe-config-file/6450/1 "2013-05-13T01:42:14Z")

</div>

Gents,

I know it was asked earlier but Ill ask again in a new thread so it doesn’t get lost

Can you please post the Airlink Raven XE config file? I have not had any luck configuring mine to show it ‘running’ from within the gateway.

Sure I can set the IP and even use it as a GSM modem on my laptop but that’s not what I bought it for 😉

Either that or just update the ignition 7.6 documentation to state what we actually need to configure in the modem. I am happy to manually apply the settings, I am just not sure what to set.

I have setup the IP address of the internal NIC, and the in/out ports but there is obviously more to it.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [May 13, 2013, 3:07am UTC](https://forum.inductiveautomation.com/t/airlink-raven-xe-config-file/6450/2 "2013-05-13T03:07:32Z")

</div>

It should be available on the Downloads \> Extras area of the website now.