# Airlink Raven XE on AT&T

**URL:** <https://forum.inductiveautomation.com/t/airlink-raven-xe-on-at-t/6798>\
**Category:** Ignition\
**Created:** [July 1, 2013, 1:57pm UTC](https://forum.inductiveautomation.com/t/airlink-raven-xe-on-at-t/6798 "2013-07-01T13:57:22Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pat](https://avatars.discourse-cdn.com/v4/letter/p/8491ac/32.png) [@Pat](https://forum.inductiveautomation.com/u/Pat)\
**Post date:** [July 1, 2013, 1:57pm UTC](https://forum.inductiveautomation.com/t/airlink-raven-xe-on-at-t/6798/1 "2013-07-01T13:57:22Z")

</div>

Just a note on setting up an Airlink Raven XE on AT&T’s network. If you find that the modem is not connecting to the network you might have to set the APN (Access Point Name) in the modem. It is located under the WAN/Cellular in the section. In my case I had to set it to ‘broadband’, without quotes.