# Alarm Above Setpoint Inclusive not working

**URL:** <https://forum.inductiveautomation.com/t/alarm-above-setpoint-inclusive-not-working/38830>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [September 18, 2020, 11:59am UTC](https://forum.inductiveautomation.com/t/alarm-above-setpoint-inclusive-not-working/38830 "2020-09-18T11:59:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![roberto.camp](https://avatars.discourse-cdn.com/v4/letter/r/a5b964/32.png) [@roberto.camp](https://forum.inductiveautomation.com/u/roberto.camp)\
**Post date:** [September 18, 2020, 11:59am UTC](https://forum.inductiveautomation.com/t/alarm-above-setpoint-inclusive-not-working/38830/1 "2020-09-18T11:59:40Z")

</div>

Hei guys,

I have an alarm problem. I’m trying to set up a UDT that has both the tags I’m reading from a device and the settings for the limits. This is working fine so far. However, I basically want the alarm to trigger if x\>=y

To do this, as I understand it. I should use “Above Setpoint” and Inclusive yes?

Problem is the alarm only triggers above the setpoint and completely ignores the inclusive.

Any idea what I’m doing wrong?

Thanks!

-R