# Alarm does not become active with "Any Change" option

**URL:** <https://forum.inductiveautomation.com/t/alarm-does-not-become-active-with-any-change-option/17200>\
**Category:** Ignition\
**Tags:** ignition79\
**Created:** [March 2, 2018, 4:22pm UTC](https://forum.inductiveautomation.com/t/alarm-does-not-become-active-with-any-change-option/17200 "2018-03-02T16:22:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![yanick.godin](https://avatars.discourse-cdn.com/v4/letter/y/e0b2c6/32.png) [@yanick.godin](https://forum.inductiveautomation.com/u/yanick.godin)\
**Post date:** [March 2, 2018, 4:22pm UTC](https://forum.inductiveautomation.com/t/alarm-does-not-become-active-with-any-change-option/17200/1 "2018-03-02T16:22:12Z")

</div>

I have encountered an issue with an alarm with the above setpoint parameter and I want the alarm to reset every time the value changes so I tried setting the Any change property but when I do the alarm just never become active.

Here is the alarm setup currently :  
Mode : Above Setpoint  
Setpoint : 20,000  
Inclusive : true  
Any Change : true

As I mentioned the alarm never become active no matter the value I put in the tag and but it works fine when I set Any Change to false.

If someone as an idea of what may be causing the issue i’d be glad to hear it.

Thanks