# Alarm Enable Behavior **URL:** \ **Category:** Ignition\ **Created:** [November 10, 2015, 2:23pm UTC](https://forum.inductiveautomation.com/t/alarm-enable-behavior/10768 "2015-11-10T14:23:55Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Duffanator](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/duffanator/32/3560_2.png) [@Duffanator](https://forum.inductiveautomation.com/u/Duffanator)\ **Post date:** [November 10, 2015, 2:23pm UTC](https://forum.inductiveautomation.com/t/alarm-enable-behavior/10768/1 "2015-11-10T14:23:55Z")
Hey all, I have a question about the alarm enable settings. If an alarm is active and the enabled setting turns false, does that alarm clear and/or drop out of a pipeline? I would think that it would, but I had a few alarms seem to persist through a false enabled state last night and they kept calling people. ---
**Author:** ![sngeru](https://avatars.discourse-cdn.com/v4/letter/s/ac91a4/32.png) [@sngeru](https://forum.inductiveautomation.com/u/sngeru)\ **Post date:** [November 26, 2015, 12:43am UTC](https://forum.inductiveautomation.com/t/alarm-enable-behavior/10768/2 "2015-11-26T00:43:12Z")
Hello, Can you attach a screenshot of the alarm configuration for one of the problem tags? Best, ---
**Author:** ![Duffanator](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/duffanator/32/3560_2.png) [@Duffanator](https://forum.inductiveautomation.com/u/Duffanator)\ **Post date:** [November 27, 2015, 2:16pm UTC](https://forum.inductiveautomation.com/t/alarm-enable-behavior/10768/3 "2015-11-27T14:16:41Z")
I was given some incorrect information and the alarms were never actually being disabled so everything was working the way it was supposed to. I fixed the logic error on the PLC side and now everything is good. I meant to post back about this but I forgot. Sorry!