# Alarm History Report

**URL:** <https://forum.inductiveautomation.com/t/alarm-history-report/16550>\
**Category:** Ignition\
**Created:** [January 10, 2018, 6:08pm UTC](https://forum.inductiveautomation.com/t/alarm-history-report/16550 "2018-01-10T18:08:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jose.granero](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jose.granero/32/11190_2.png) [@jose.granero](https://forum.inductiveautomation.com/u/jose.granero)\
**Post date:** [January 10, 2018, 6:08pm UTC](https://forum.inductiveautomation.com/t/alarm-history-report/16550/1 "2018-01-10T18:08:47Z")

</div>

I’ve created a simple alarm history report which just has a table showing the following fields:

- Event time
- Active duration
- Display path
- Name
- Event Value

I want this last value to be the one which caused the alarm trigger, however it shows the value for which the alarm was cleared. Is there any way to achieve this?

As data source for this report I’m using an alarm\_journal query type, where I’ve marked the following checkboxes: active, cleared and use current status events.