# Alarm in UDT Cant Remove

**URL:** <https://forum.inductiveautomation.com/t/alarm-in-udt-cant-remove/6499>\
**Category:** Ignition\
**Created:** [May 16, 2013, 11:52am UTC](https://forum.inductiveautomation.com/t/alarm-in-udt-cant-remove/6499 "2013-05-16T11:52:56Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![gadgetguru69](https://avatars.discourse-cdn.com/v4/letter/g/e274bd/32.png) [@gadgetguru69](https://forum.inductiveautomation.com/u/gadgetguru69)\
**Post date:** [May 16, 2013, 11:52am UTC](https://forum.inductiveautomation.com/t/alarm-in-udt-cant-remove/6499/1 "2013-05-16T11:52:56Z")

</div>

Found something this morning that looks to be issue and wanted to see if any one else is seeing this. I am unable to remove an alarm from a tag within a UDT once it has been created. You can delete the alarm in the setup and it goes away from list but is still there still shows up when UDT is opened again and is still in the tag created off the UDT.

---

<div class="post-metadata">

**Author:** ![gadgetguru69](https://avatars.discourse-cdn.com/v4/letter/g/e274bd/32.png) [@gadgetguru69](https://forum.inductiveautomation.com/u/gadgetguru69)\
**Post date:** [May 19, 2013, 1:14pm UTC](https://forum.inductiveautomation.com/t/alarm-in-udt-cant-remove/6499/2 "2013-05-19T13:14:37Z")

</div>

This still appears to be an issue in 7.6.1 rc3.

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [May 20, 2013, 10:41pm UTC](https://forum.inductiveautomation.com/t/alarm-in-udt-cant-remove/6499/3 "2013-05-20T22:41:47Z")

</div>

Hi,

This has been fixed for the next 7.6.1 update (RC 4 this afternoon, though I think we’re making it official tomorrow morning since so many important things have been fixed).

Regards,

---

<div class="post-metadata">

**Author:** ![gadgetguru69](https://avatars.discourse-cdn.com/v4/letter/g/e274bd/32.png) [@gadgetguru69](https://forum.inductiveautomation.com/u/gadgetguru69)\
**Post date:** [May 20, 2013, 11:26pm UTC](https://forum.inductiveautomation.com/t/alarm-in-udt-cant-remove/6499/4 "2013-05-20T23:26:55Z")

</div>

Thanks for the update Colby. Ill try it out tomorrow.

---

<div class="post-metadata">

**Author:** ![gadgetguru69](https://avatars.discourse-cdn.com/v4/letter/g/e274bd/32.png) [@gadgetguru69](https://forum.inductiveautomation.com/u/gadgetguru69)\
**Post date:** [May 21, 2013, 12:10pm UTC](https://forum.inductiveautomation.com/t/alarm-in-udt-cant-remove/6499/5 "2013-05-21T12:10:03Z")

</div>

Looks like it is indeed working correctly now. Thanks