# Alarm Journal 7.6.6 problem

**URL:** <https://forum.inductiveautomation.com/t/alarm-journal-7-6-6-problem/8375>\
**Category:** Ignition\
**Created:** [April 28, 2014, 6:50am UTC](https://forum.inductiveautomation.com/t/alarm-journal-7-6-6-problem/8375 "2014-04-28T06:50:29Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![quper](https://avatars.discourse-cdn.com/v4/letter/q/aeb1de/32.png) [@quper](https://forum.inductiveautomation.com/u/quper)\
**Post date:** [April 28, 2014, 6:50am UTC](https://forum.inductiveautomation.com/t/alarm-journal-7-6-6-problem/8375/1 "2014-04-28T06:50:29Z")

</div>

Hello,  
I have upgraded to 7.6.6 and have a problem with Alarm Journal.  
In alarm journal I am able to see alarms from new tags I have created after update, but I am not able to see new alarms from previously created tags. Looks like previously created tags with alarms have not been updated to write themselves to the new alarm table. Because I still can see new alarms from old tags and from new tags in old alarms history table i used with queryAlertHistory, but not in a journal.

---

<div class="post-metadata">

**Author:** ![quper](https://avatars.discourse-cdn.com/v4/letter/q/aeb1de/32.png) [@quper](https://forum.inductiveautomation.com/u/quper)\
**Post date:** [April 28, 2014, 6:55am UTC](https://forum.inductiveautomation.com/t/alarm-journal-7-6-6-problem/8375/2 "2014-04-28T06:55:10Z")

</div>

I have found what the issue is. All alarms from old tags have now after update ‘Diagnostic’ priority, alarms from new tags have priority ‘Low’.  
But I still don’t understand, why Alarm Journal does not show alarms with ‘Diagnostic’ priority, because in Journal settings Min. priority is set to Diagnostic.

---

<div class="post-metadata">

**Author:** ![quper](https://avatars.discourse-cdn.com/v4/letter/q/aeb1de/32.png) [@quper](https://forum.inductiveautomation.com/u/quper)\
**Post date:** [May 7, 2014, 5:54am UTC](https://forum.inductiveautomation.com/t/alarm-journal-7-6-6-problem/8375/3 "2014-05-07T05:54:41Z")

</div>

The problem is: new Alarm Journal doesn’t show alarms with Diagnostic priority.

---

<div class="post-metadata">

**Author:** ![quper](https://avatars.discourse-cdn.com/v4/letter/q/aeb1de/32.png) [@quper](https://forum.inductiveautomation.com/u/quper)\
**Post date:** [June 16, 2014, 10:56am UTC](https://forum.inductiveautomation.com/t/alarm-journal-7-6-6-problem/8375/4 "2014-06-16T10:56:22Z")

</div>

I should’ve looked in gateway journal properties and adjust minimum priority there.