# Alarm Journal filter problem, diagnostic priority

**URL:** <https://forum.inductiveautomation.com/t/alarm-journal-filter-problem-diagnostic-priority/32858>\
**Category:** Ignition\
**Created:** [March 5, 2020, 9:27pm UTC](https://forum.inductiveautomation.com/t/alarm-journal-filter-problem-diagnostic-priority/32858 "2020-03-05T21:27:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![justin.huggins](https://avatars.discourse-cdn.com/v4/letter/j/d07c76/32.png) [@justin.huggins](https://forum.inductiveautomation.com/u/justin.huggins)\
**Post date:** [March 5, 2020, 9:27pm UTC](https://forum.inductiveautomation.com/t/alarm-journal-filter-problem-diagnostic-priority/32858/1 "2020-03-05T21:27:42Z")

</div>

I have an alarm table and an alarm journal setup setup side by side. The alarm is setup with the priority of ‘Diagnostic’. I have setup the journal to Min and Max Priority as Diagnostic as I want to filter out everything else. I just have`*Comm Issue*` on the Display Path Filter. I can see the alarms hitting the alarm table, but not the Journal even though I have the same filter setup. I have also changed the journal Profile to store down Diagnostic or above(initially was set to low). Any idea of what I might be missing, again the alarm table is working perfect. Cannot get any of these Diagnostic alarms to populate on Journal though.