# Alarm Notification Pipeline - Notification Block

**URL:** <https://forum.inductiveautomation.com/t/alarm-notification-pipeline-notification-block/28751>\
**Category:** Ignition\
**Created:** [October 2, 2019, 4:54pm UTC](https://forum.inductiveautomation.com/t/alarm-notification-pipeline-notification-block/28751 "2019-10-02T16:54:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![dion.botha](https://avatars.discourse-cdn.com/v4/letter/d/46a35a/32.png) [@dion.botha](https://forum.inductiveautomation.com/u/dion.botha)\
**Post date:** [October 2, 2019, 4:54pm UTC](https://forum.inductiveautomation.com/t/alarm-notification-pipeline-notification-block/28751/1 "2019-10-02T16:54:14Z")

</div>

Hello,

When configuring properties for the notification block (haven’t tested other blocks), If I change a property then lose focus to anything other than another property in the same block the changes are not saved… Many times I have tried to change properties on multiple pipelines only to find they didn’t take affect due to this and I have to redo them.

Not a major bug but would be nice if this was fixed at some point.