# Alarm Pipeline

**URL:** <https://forum.inductiveautomation.com/t/alarm-pipeline/10338>\
**Category:** Ignition\
**Created:** [August 13, 2015, 3:59am UTC](https://forum.inductiveautomation.com/t/alarm-pipeline/10338 "2015-08-13T03:59:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![steven\_hargraves](https://avatars.discourse-cdn.com/v4/letter/s/eb8c5e/32.png) [@steven\_hargraves](https://forum.inductiveautomation.com/u/steven_hargraves)\
**Post date:** [August 13, 2015, 3:59am UTC](https://forum.inductiveautomation.com/t/alarm-pipeline/10338/1 "2015-08-13T03:59:26Z")

</div>

Greetings All  
I have an SMS Alarm Pipeline with a large number of entries.  
This was caused by incorrect config of user’s SMS contact number.  
Does anyone know how I can remove the entries from the Alarm Pipeline ?  
Also, other than going to the Gateway & looking at each pipeline routinely, how do I monitor the Alarm Pipeline in my runtime system so this does not happen again ?

Thanks & regards  
Steve Hargraves