# Alarm send to AD group

**URL:** <https://forum.inductiveautomation.com/t/alarm-send-to-ad-group/61666>\
**Category:** Ignition\
**Created:** [July 8, 2022, 6:34am UTC](https://forum.inductiveautomation.com/t/alarm-send-to-ad-group/61666 "2022-07-08T06:34:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Inken\_Kestler](https://avatars.discourse-cdn.com/v4/letter/i/bcef8e/32.png) [@Inken\_Kestler](https://forum.inductiveautomation.com/u/Inken_Kestler)\
**Post date:** [July 8, 2022, 6:34am UTC](https://forum.inductiveautomation.com/t/alarm-send-to-ad-group/61666/1 "2022-07-08T06:34:21Z")

</div>

Hi together,

I implemented an alarm notification, that is sent, when a special button is pressed.  
For this i configurated an alarm profil on the gateway, a new user for me with my email adress and an on-call roster with my user. In Ignition I configured a pipeline and connected this to my button. I works quite fine. But for the next step, this mail should not be sent to me, but to an existing ad group.  
I don’t want to add all this people as individual users in a user source.

Is it possible to use a Actice Directory User Source for the Alarming? And is it also possible that this list is dynamic? I want to avoid to change the list in Ignition manually, when a new employee is added to this AD group?

Thanks

---

<div class="post-metadata">

**Author:** ![kyler.kamyszek](https://avatars.discourse-cdn.com/v4/letter/k/a4c791/32.png) [@kyler.kamyszek](https://forum.inductiveautomation.com/u/kyler.kamyszek)\
**Post date:** [July 8, 2022, 12:36pm UTC](https://forum.inductiveautomation.com/t/alarm-send-to-ad-group/61666/2 "2022-07-08T12:36:31Z")

</div>

I had this issue long ago, so there might be other solutions now. To get around it, I set up an user in my AD that received the emails. I then set up some forwarding rules on the AD user to forward the alarm emails to various groups.