# Alarm Severity / Priority issue

**URL:** <https://forum.inductiveautomation.com/t/alarm-severity-priority-issue/10412>\
**Category:** Ignition\
**Created:** [August 28, 2015, 12:17am UTC](https://forum.inductiveautomation.com/t/alarm-severity-priority-issue/10412 "2015-08-28T00:17:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![qversa](https://avatars.discourse-cdn.com/v4/letter/q/35a633/32.png) [@qversa](https://forum.inductiveautomation.com/u/qversa)\
**Post date:** [August 28, 2015, 12:17am UTC](https://forum.inductiveautomation.com/t/alarm-severity-priority-issue/10412/1 "2015-08-28T00:17:56Z")

</div>

Hi, I have an alarm configured with a Priority of “High”. When I use the Alert Summary Table there is no Priority column so I am using Severity but it does not match the Priority. Also, I’ve noticed that the Alert Summary Table no longer exists in my Component Palette. Was it perhaps removed when I upgraded from a previous version of Ignition?

---

<div class="post-metadata">

**Author:** ![qversa](https://avatars.discourse-cdn.com/v4/letter/q/35a633/32.png) [@qversa](https://forum.inductiveautomation.com/u/qversa)\
**Post date:** [August 28, 2015, 12:23am UTC](https://forum.inductiveautomation.com/t/alarm-severity-priority-issue/10412/2 "2015-08-28T00:23:58Z")

</div>

Did a little more searching and it looks like the Alert Summary Table has been deprecated? I’ll use another component instead.