# Alarm Status Table and Alarm Journal Components **URL:** \ **Category:** Ignition\ **Created:** [November 12, 2019, 1:26pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-and-alarm-journal-components/29873 "2019-11-12T13:26:18Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\ **Post date:** [April 22, 2020, 4:42pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-and-alarm-journal-components/29873/3 "2020-04-22T16:42:21Z")
It should be stored in the alarm\_event\_data table. There were some earlier issues with this as descibe in this thread: > [@\[11961\] Ignition 7.9.10 - possible bug with alarm journal - missed data in alarm\_event\_data?](http://forum.inductiveautomation.com/t/11961-ignition-7-9-10-possible-bug-with-alarm-journal-missed-data-in-alarm-event-data/23635): > > Does anybody noticed any similar issue about alarm journal ? #91766 - alarm journal query - label With the component alarm journal query, the label is correctly displayed for alarm in state : active unack and clear unack. For the row for the alarm in state clear ack, the label is replaced by the alarm name It seems to me that the label is not stored in the alarm\_event\_data for the ack events. #91770 - Acknowledge alarm don’t capture associated data When an alarm go active or cleared, alarm… --- _[View the full topic](https://forum.inductiveautomation.com/t/alarm-status-table-and-alarm-journal-components/29873)._