# Alarm status table background color doesn't change **URL:** \ **Category:** Ignition\ **Tags:** vision\ **Created:** [December 8, 2023, 2:48pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-background-color-doesnt-change/82897 "2023-12-08T14:48:40Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![justinedwards.jle](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/justinedwards.jle/32/37854_2.png) [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\ **Post date:** [December 14, 2023, 2:26pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-background-color-doesnt-change/82897/6 "2023-12-14T14:26:24Z")
I'm not sure. I have done a complete dark mode tutorial for the alarm status table before, although it's kind of off topic in the thread it's in. Here's the link to it. Perhaps there will be something buried in there that will help you get the result you are after: > [@Change the header color of a Alarm Status Table](https://forum.inductiveautomation.com/t/change-the-header-color-of-a-alarm-status-table/41933/13): > > Today, I developed a dark mode for the alarm status table, and indeed, the header was a bit tricky. The top right corner can be set directly, but to change the header itself, I ended up setting it's background to transparent, so the underlying color could come through. The top left corner underneath the multistate button is a buffered image, so I ended up having to create a graphic to paint over it. Here is the result: Here is the full code for dark mode in a version that was set up … ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/f/3fadcfe0df287eecd2533db885915b9f69dd6228.png) --- _[View the full topic](https://forum.inductiveautomation.com/t/alarm-status-table-background-color-doesnt-change/82897)._