# Alarm Status Table - Description/Documentation

**URL:** <https://forum.inductiveautomation.com/t/alarm-status-table-description-documentation/18637>\
**Category:** Ignition\
**Tags:** ignition79\
**Created:** [June 26, 2018, 10:25pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-description-documentation/18637 "2018-06-26T22:25:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![c.henderson](https://avatars.discourse-cdn.com/v4/letter/c/c89c15/32.png) [@c.henderson](https://forum.inductiveautomation.com/u/c.henderson)\
**Post date:** [June 26, 2018, 10:25pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-description-documentation/18637/1 "2018-06-26T22:25:43Z")

</div>

Is there a method of adding the alarming tags ‘documentation’ metadata to the Alarm Status Table?

---

<div class="post-metadata">

**Author:** ![mbhagotra](https://avatars.discourse-cdn.com/v4/letter/m/b9e5f3/32.png) [@mbhagotra](https://forum.inductiveautomation.com/u/mbhagotra)\
**Post date:** [January 27, 2020, 4:55pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-description-documentation/18637/2 "2020-01-27T16:55:31Z")

</div>

I’m looking into this as well as we are using an alarm array as an UDT and would make life a lot easier if it can automatically transfer the Tag Documentation metadata field to the Alarm Label field.

EDIT: Using Ignition 8.0.7