# Alarm Status Table - Deselect on Acknowledge **URL:** \ **Category:** Ignition\ **Tags:** ignition81, perspective\ **Created:** [September 7, 2024, 7:33pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-deselect-on-acknowledge/95673 "2024-09-07T19:33:39Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![JohnIrving](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/johnirving/32/37638_2.png) [@JohnIrving](https://forum.inductiveautomation.com/u/JohnIrving)\ **Post date:** [September 7, 2024, 7:33pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-deselect-on-acknowledge/95673/1 "2024-09-07T19:33:39Z")
I have an alarm status table that is showing acknowledged alarms with unacked alarms but with different styling on the same table. When the user selects several alarms (or just one) and acknowledges them, the alarms remain selected and the slide in bar that shows the acknowledge button stays on the screen until they deselect all. Is there any way to have these deselect when that button is pressed? Anything I can tie into to script that myself? ---
**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\ **Post date:** [September 7, 2024, 8:29pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-deselect-on-acknowledge/95673/2 "2024-09-07T20:29:07Z")
What version? ---
**Author:** ![JohnIrving](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/johnirving/32/37638_2.png) [@JohnIrving](https://forum.inductiveautomation.com/u/JohnIrving)\ **Post date:** [September 8, 2024, 12:45am UTC](https://forum.inductiveautomation.com/t/alarm-status-table-deselect-on-acknowledge/95673/3 "2024-09-08T00:45:31Z")
8.1.19 (b2022072711)