# Alarm Status Table - Dynamic filtering **URL:** \ **Category:** Ignition\ **Tags:** vision\ **Created:** [February 27, 2023, 9:12pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-dynamic-filtering/70391 "2023-02-27T21:12:48Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![justinedwards.jle](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/justinedwards.jle/32/37854_2.png) [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\ **Post date:** [February 27, 2023, 9:17pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-dynamic-filtering/70391/2 "2023-02-27T21:17:03Z")
This post should help you figure it out: > [@\[Solved\] Alarm Status Table/Alarm Journal: Source Filtering](https://forum.inductiveautomation.com/t/solved-alarm-status-table-alarm-journal-source-filtering/69924): > > At least twice now I've seen this topic come up where a source filter is being used, and it does not return the expected result. In all cases, an expression of some kind is being used that produces a name that will look like \*Flowmeter 1\*, but instead of filtering out all but Flowmeter 1, it also shows Flowmeter 10, Flowmeter 11, etc.. My recommendation has always been to modify the expression to include a colon after the flowmeter name, so the outcome is \*Flowmeter 1:\*, but it occurs to me tha… --- _[View the full topic](https://forum.inductiveautomation.com/t/alarm-status-table-dynamic-filtering/70391)._