# Alarm Status Table Error

**URL:** <https://forum.inductiveautomation.com/t/alarm-status-table-error/114854>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [April 2, 2026, 1:09pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-error/114854 "2026-04-02T13:09:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![meg101](https://avatars.discourse-cdn.com/v4/letter/m/74df32/32.png) [@meg101](https://forum.inductiveautomation.com/u/meg101)\
**Post date:** [April 2, 2026, 1:09pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-error/114854/1 "2026-04-02T13:09:03Z")

</div>

Hi all,

I previously had a working alarm status table in Vision 8.3.3 but it seems to have stopped displaying any alarms. I am getting this error in the console:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/e/6e8e284f57dc56f0997b24bd98a946f5b5357b9e.png)

I have another alarm status table in a pop-up with a display path filter that is still working. I have tried copying and pasting and changing however that one also still doesn’t work.

Any help would be appreciated!

Thanks

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [April 2, 2026, 3:33pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-error/114854/2 "2026-04-02T15:33:05Z")

</div>

This is a bug on our side. There's an internal ticket with some investigation work, but no known workaround at this point.

If you're not already in contact with [Support](https://support.inductiveautomation.com/hc/en-us) officially, please do so.