# Alarm Status Table filter on Priority

**URL:** <https://forum.inductiveautomation.com/t/alarm-status-table-filter-on-priority/36821>\
**Category:** General Discussion\
**Created:** [July 17, 2020, 1:34pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-filter-on-priority/36821 "2020-07-17T13:34:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![e\_brh](https://avatars.discourse-cdn.com/v4/letter/e/ce7236/32.png) [@e\_brh](https://forum.inductiveautomation.com/u/e_brh)\
**Post date:** [July 17, 2020, 1:34pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-filter-on-priority/36821/1 "2020-07-17T13:34:15Z")

</div>

Hello,

I would like to filter alarms in the Alarm Status table component. I did it on the Alarm Journal and it worked well, I used the MinimumPriority and MaximumPriority properties. The problem is : with the Alarm Status Table, I have the MinPriority but I don’t have the MaxPriority. Is there another way to filter on a single priority ( for exemple if I only want to display Low alarms)?

Thank you for your help

Eléa

---

<div class="post-metadata">

**Author:** ![Rendi.Yohanes](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@Rendi.Yohanes](https://forum.inductiveautomation.com/u/Rendi.Yohanes)\
**Post date:** [July 18, 2020, 11:38am UTC](https://forum.inductiveautomation.com/t/alarm-status-table-filter-on-priority/36821/2 "2020-07-18T11:38:05Z")

</div>

This is how I did it for Ignition 7.9:  
On the Alarm Status Table component, you can open the scripting window, and under Extension Function there’s a “Filter Alarm” script.  
You can play with the – alarmEvent.get(“priority”) –

Not sure if they made it easier in Ignition 8.0.