# Alarm Status Table Number of Active and shelved

**URL:** <https://forum.inductiveautomation.com/t/alarm-status-table-number-of-active-and-shelved/99232>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [November 28, 2024, 2:50pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-number-of-active-and-shelved/99232 "2024-11-28T14:50:24Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mahsasalimi](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mahsasalimi/32/68520_2.png) [@mahsasalimi](https://forum.inductiveautomation.com/u/mahsasalimi)\
**Post date:** [November 28, 2024, 2:50pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-number-of-active-and-shelved/99232/1 "2024-11-28T14:50:24Z")

</div>

I have an alarm list on my faceplate .

I have enabled the Active and shelved tab and used the filtering function to only show the alarms related to this specific unit and it works perfectly fine.

Problem I have is that, it still shows the number of active and shelved alarms for the whole tag provider and not only the ones that fit the fitler.  
Is there a way to adjust this number ?

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/d/cded535230ddf1771c35a1adbddb72ad1713d467.png)