# Alarm Status Table shelve button

**URL:** <https://forum.inductiveautomation.com/t/alarm-status-table-shelve-button/7387>\
**Category:** Ignition\
**Created:** [October 8, 2013, 6:20pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-shelve-button/7387 "2013-10-08T18:20:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![onestank](https://avatars.discourse-cdn.com/v4/letter/o/ba9def/32.png) [@onestank](https://forum.inductiveautomation.com/u/onestank)\
**Post date:** [October 8, 2013, 6:20pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-shelve-button/7387/1 "2013-10-08T18:20:23Z")

</div>

I am running 7.6.3 and in my Alarm status table I have opted to not show the shelve button. Yet the client still shows it and one is able to push the button.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 8, 2013, 6:33pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-shelve-button/7387/2 "2013-10-08T18:33:45Z")

</div>

It looks like this has already been fixed for 7.6.4. Thanks for the report though!

---

<div class="post-metadata">

**Author:** ![onestank](https://avatars.discourse-cdn.com/v4/letter/o/ba9def/32.png) [@onestank](https://forum.inductiveautomation.com/u/onestank)\
**Post date:** [October 8, 2013, 6:38pm UTC](https://forum.inductiveautomation.com/t/alarm-status-table-shelve-button/7387/3 "2013-10-08T18:38:40Z")

</div>

Thanks Kevin!