# Alarming enabled

**URL:** <https://forum.inductiveautomation.com/t/alarming-enabled/14984>\
**Category:** Ignition\
**Tags:** ignition79\
**Created:** [August 4, 2017, 10:22am UTC](https://forum.inductiveautomation.com/t/alarming-enabled/14984 "2017-08-04T10:22:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![eduardo.ojalvo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/eduardo.ojalvo/32/14356_2.png) [@eduardo.ojalvo](https://forum.inductiveautomation.com/u/eduardo.ojalvo)\
**Post date:** [August 4, 2017, 10:22am UTC](https://forum.inductiveautomation.com/t/alarming-enabled/14984/1 "2017-08-04T10:22:54Z")

</div>

Hi everybody,

I need help about the alarm configuration parameter.  
I have an UDT tag and in the alarming try to set the ENABLED parameter to an expression tag.  
I´d like when the two boolean tags are true the alarm will be ENABLED by this parameter but it doesn´t work right. When i put the expression the alarm is always enable.

Thank you very much.  
Kind regards.

Mr. Eduardo Ojalvo

---

<div class="post-metadata">

**Author:** ![eduardo.ojalvo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/eduardo.ojalvo/32/14356_2.png) [@eduardo.ojalvo](https://forum.inductiveautomation.com/u/eduardo.ojalvo)\
**Post date:** [August 4, 2017, 11:05am UTC](https://forum.inductiveautomation.com/t/alarming-enabled/14984/2 "2017-08-04T11:05:58Z")

</div>

Sorry it is working.  
It was a syntac error in the expression.

Thanks.

---

<div class="post-metadata">

**Author:** ![Joachim](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/joachim/32/86912_2.png) [@Joachim](https://forum.inductiveautomation.com/u/Joachim)\
**Post date:** [June 11, 2018, 10:27am UTC](https://forum.inductiveautomation.com/t/alarming-enabled/14984/3 "2018-06-11T10:27:51Z")

</div>

Do you have the expression? I have the same problem.