# Alarming name dynamic

**URL:** <https://forum.inductiveautomation.com/t/alarming-name-dynamic/21475>\
**Category:** Ignition\
**Created:** [December 18, 2018, 2:37pm UTC](https://forum.inductiveautomation.com/t/alarming-name-dynamic/21475 "2018-12-18T14:37:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ltraverso](https://avatars.discourse-cdn.com/v4/letter/l/e56c9b/32.png) [@ltraverso](https://forum.inductiveautomation.com/u/ltraverso)\
**Post date:** [December 18, 2018, 2:37pm UTC](https://forum.inductiveautomation.com/t/alarming-name-dynamic/21475/1 "2018-12-18T14:37:41Z")

</div>

Dear all,  
is it possible to concatenate a alarming name with a tag?  
I’ve a tag with a fault number. I’d like to create a message like  
“fault N. 0001”  
“fault N. 0002”…  
where “fault N.” is alarming name and the number is the dynamic tag.

If it not possible any suggest ?  
thank you

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [December 18, 2018, 4:08pm UTC](https://forum.inductiveautomation.com/t/alarming-name-dynamic/21475/2 "2018-12-18T16:08:45Z")

</div>

While the _name_ of an alarm cannot be dynamic, there are various other fields (including a bindable ‘Label’ property, as of 7.9.8) that can use expression to construct a dynamic reference for the alarm.