# Alarming notification radio **URL:** \ **Category:** Archived Topics\ **Created:** [August 19, 2013, 9:52pm UTC](https://forum.inductiveautomation.com/t/alarming-notification-radio/7084 "2013-08-19T21:52:45Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![tailfire](https://avatars.discourse-cdn.com/v4/letter/t/b5a626/32.png) [@tailfire](https://forum.inductiveautomation.com/u/tailfire)\ **Post date:** [August 19, 2013, 9:52pm UTC](https://forum.inductiveautomation.com/t/alarming-notification-radio/7084/1 "2013-08-19T21:52:45Z")
Attached is a pdf brochure for a device that I would like to ask IA about. It is a pdf that represents the hardware we use in our current system. A PLC triggers a relay that is wired to the 8 different channels to broadcast an alarm event over our ‘radios’… What I would like to ask of the forum is what hardware that anybody is using to do something similar. What I would like to achieve is to find a device or interface component that I can script to in ignition much like the VoIP setup. In a nutshell I am looking for some device that I can configure Ignition to broadcast all the alerts across a 2 way radio repeater system or digital radio system of sorts… I hope someone can understand what I mean here and respond back to the forum with some information…